[coreboot] [PATCH] [RFC] sata PHY settings callback on SB700

[Peter Stuge]

Rudolf Marek wrote:
> Here is a proposed way how to handle the SATA PHY settings on SB700. It 
> consists
> of weak function which always exists (with defaults) and a possibility to 
> override this with normal function in main.c. This is the other way of 
> doing that and not using the devictree.cb.
>
> Please tell if it is ok this way. I suggest all people who ported SB700 
> should have a look on their SATA PHY settings too because it is most  
> likely PCB/MB dependent.
>
> This patch is not tested but it could work.
>
> Signed-off-by: Rudolf Marek <r.marek at assembler.cz>

Acked-by: Peter Stuge <peter at stuge.se>

Let's try it out!