[coreboot] First coreboot build for Tyan s2895 K8WE mobo with seabios payload, computer starts, but graphical ubuntu 64bits is crashing
STEMMELIN, FREDERIC (FREDERIC)** CTR **
frederic.stemmelin at alcatel-lucent.com
Fri Sep 17 09:29:10 CEST 2010
> Coreboot is 32 bit, but it will work fine with a 64-bit OS
Thank's for the info
> Have you tried using a separate graphics card? That would narrow down the
> problem. I would try adding the VGA BIOS, though
Yes, in fact there is no internal video card in my board, so i am using a external PCI card, Matrox MGA millenium. I will try with VGA bios from original Tyan bios.
> I thought if you did a 'make clean' it deleted the .xcompile file.
Thank's for the advice, i will remember for next time.
Cheers,
Frédéric
-----Message d'origine-----
De : Myles Watson [mailto:mylesgw at gmail.com]
Envoyé : jeudi 16 septembre 2010 23:25
À : STEMMELIN, FREDERIC (FREDERIC)** CTR **; coreboot at coreboot.org
Objet : Re: [coreboot] First coreboot build for Tyan s2895 K8WE mobo with seabios payload, computer starts, but graphical ubuntu 64bits is crashing
> Now i have a 3 questions for you:
>
> Is the coreboot.rom 32bits only and is there any advantage to build a
> 64bits version of the coreboot bios, as i intend to run a 64bits OS ?
Coreboot is 32 bit, but it will work fine with a 64-bit OS.
> I build the seabios with Ubuntu gcc 64bits version, it is compatible, can
> i mix it, with the coreboot.rom build with i386-elf coreboot toolchain ?
> The build seabios (bios.bin.elf) is about 1MB in size, how it is possible
> to put it into a smaller 512KB chip inside coreboot.rom ?
Most of it is empty space. When the ELF gets unpacked, it doesn't take that
much space.
> I didnt put VGA bios so far into the coreboot.rom.
Have you tried using a separate graphics card? That would narrow down the
problem. I would try adding the VGA BIOS, though.
> In my opinion, it would be a good idea to mention, somewhere in the build
> howto, that there is a integrated toolchain in coreboot, and may be also
> mention not to forget to delete the .xcompile file after the toolchain was
> built.
I thought if you did a 'make clean' it deleted the .xcompile file.
> What are your advice for the next steps ?
I would add a Video card or put the VGA BIOS into coreboot.rom. Whichever
one you find easier.
Thanks,
Myles
More information about the coreboot
mailing list