[coreboot] [PATCH] use Kconfig for both options on Lippert boards

Stefan Reinauer stefan.reinauer at coresystems.de
Wed Sep 1 13:59:44 CEST 2010

 On 9/1/10 1:22 PM, Patrick Georgi wrote:
> Am 01.09.2010 11:31, schrieb Jens Rottmann:
>> I meant the mapping INT A --> IRQ 10 etc. I already had a patch for this
>> (attached) but also decided against it, because this should be generic
>> and _not_ done individually at the board level and the device tree is a
>> better place for it anyway.
> That data doesn't belong in code, yes. Unfortunately we don't have a
> very good place for it at all, at the moment.
> The plan is to fix that, but I can't give a schedule, so _any_ support
> you provide will (very likely) need to be rewritten at some point
> (once we have a framework for that), so don't waste too much time to
> make it pretty.
Actually, I think for the mapping we do have a mechanism in some
mainboards already, and it's stored in the device tree.


In addition, the IRQ routing information itself should also be stored in
the device tree, and that, unfortunately, lacks a framework to do so.


coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.dehttp://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

More information about the coreboot mailing list