[coreboot] (no subject)

[Joseph Smith]

On 05/22/2010 02:39 AM, mbertens wrote:
> hi all,
>
> I have a question about the PCI api and howto set registers on PCI
> devices. My system a Nokia IP530 has a BX440 northbridge and a 82371
> southbrigde.
>
> The system has;
> - Dual IDE contoller (working)
> - Super I/O (Serial, keyb and flash-enable working)
> - 4 onboard NIC's 21143PD (1 NIC working)
> - PCMCIA controller dual slot PCI1225.
>
> I want to set the GPIOs of the SB to specific values to see if i can get
> the NICs and PCMCIA to work. All NICs get an IRQ assingment. So there
> must be some thing else that prevents them from working properly.
>
> Or if anyone has any good ideas for this problem let me known.
>
Hello Marc,
Are the LED's on your NIC's lighting up?


-- 
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org