[coreboot] 回复: Advice how to install Linux to get it working with FILO
wangqingpei at gmail.com
Wed May 19 01:46:39 CEST 2010
Grub command is fine, what is your problem about filo? send the log if you can
Wang Qing Pei
Mail: wangqingpei at gmail.com
----- Reply message -----
发件人： "Joop Boonen" <joop_boonen at web.de>
日期： 周三, 5 月 19 日, 2010 年 07:09
主题： [coreboot] Advice how to install Linux to get it working with FILO
收件人： <coreboot at coreboot.org>
I want to get FILO working on my system (arima/hdama).
As I want to rule out my Linux installation I have a few questions.
I've installed openSuSE 11.2 x86_64 on a SATA disk connected to the on
board SIL3114 controller.
I have the follwoing partitioning.
1) /boot about 128 MB
2) swap about 2 GB
3) /root about 60GB
4) /home about 20GB
Is this OK or is there also a track maximum for FILO like existed for LILO?
Is it best to configure FILO with grub commands?
coreboot mailing list: coreboot at coreboot.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot