[coreboot] Coreboot doesn't boot on Arima HDAMA rev.G mainboard

Joop Boonen joop_boonen at web.de
Wed May 5 23:42:23 CEST 2010

On Wed, May 5, 2010 12:35 am, Myles Watson wrote:
>>> I think the most likely culprit is SB_HT_CHAIN_ON_BUS0.  Could you
>>> change it to 1 in src/mainboard/arima/hdama/Kconfig, make oldconfig,
>>> and test?
>> I've tested it. I get the filo screen now.
> Great.  I checked that in Rev 5522.
>> When I do a probe I don't see any IDE device yet. Neither IDE nor SATA
>> SIL3114 drive. This also didn't work for version 4920.
> Have you tried SeaBIOS?  I haven't used FILO much.  In your log it
> looks like FILO is expecting to find something in your CMOS that it
> doesn't find.
> ERROR: No such CMOS option (boot_devices)
> menu: hda3:/boot/filo/menu.lst

I've just used SeaBIOS. With SeaBIOS LInux boots without a problem (except
for ACPI, I understood this is not (fully) supported yet.

I have a feeling that FILO has an issue?
> You could look into that.
> Thanks,
> Myles
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot

More information about the coreboot mailing list