[coreboot] Coreboot doesn't boot on Arima HDAMA rev.G mainboard

[Rudolf Marek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

I used the Sillicon Image PCI card with onboard BIOS. It works well in SeaBIOS.
I would say here would be enough to extract the optionrom from orig BIOS. And
SeaBIOS will assign/use it.

By the bizarre coincidence I had this board @home and booting from IDE worked
well (under SeaBIOS).

Attached patch enables bios_extract to extract the BIOS ;)

oprom_4.rom is for SATA
oprom_3.rom is FastTRAK

I think you can http://www.coreboot.org/SeaBIOS go same as for Adding the VGA
rom here.

As a side note one could program an GPL rombios for this controller - any takers?

Thanks,
Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkvh0FgACgkQ3J9wPJqZRNWS9ACfX/zKWvtO+WV/wwHkDxPdq6P9
qZgAoIrO8y4BaYJBV2e/Lx//gsbpy6I/
=vBZM
-----END PGP SIGNATURE-----
-------------- next part --------------
A non-text attachment was scrubbed...
Name: add_ServerBIOS3.patch
Type: text/x-diff
Size: 535 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100505/98cc4adc/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: add_ServerBIOS3.patch.sig
Type: application/octet-stream
Size: 72 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100505/98cc4adc/attachment.obj>