[coreboot] Coreboot doesn't boot on Arima HDAMA rev.G mainboard

[Myles Watson]

On Tue, May 4, 2010 at 11:54 AM, Myles Watson <mylesgw at gmail.com> wrote:
>
>> rev 4920 works without a problem, also with the extracted VGA. I get the
>> FILO screen.
>
> Great.  You could check the values from Kconfig (build/config.h) and compare
> them to the values from 4920.  That would be the easiest thing to fix.
I think the most likely culprit is SB_HT_CHAIN_ON_BUS0.  Could you
change it to 1 in src/mainboard/arima/hdama/Kconfig, make oldconfig,
and test?

Thanks,
Myles