[coreboot] Hardware damaged?

[Myles Watson]

On Tue, May 4, 2010 at 8:49 AM, mark <mark at tvk.rwth-aachen.de> wrote:
> Hi,
>
>> Please try to unplug the board completely from the power outlet and retry.
>> Also dont forget to clear the CMOS. Then re-try with orig bios.
>
> I unplugged the power, set the clear cmos jumper, waited some time and even
> removed the battery, but this doesn't help, still the same symptoms after
> powering on again.

Is there any output on the serial console with Coreboot?  There should
have been a lot of it the first time when you got to VGA init.

Thanks,
Myles