[coreboot] PATCH: Add code to initialize PIIX4 ACPI/PM/SMBus device

[Keith Hui]

The attached patch adds code required for initializing the ACPI/power
management/SMBus subdevice of PIIX4.

This is required for properly placing the I/O ports for power
management functionalities, which in turn will be required for future
ACPI work. Speaking of which, I based these ports at 0xe400, after my
P2B-LS board. This support is far from complete, but one step at a
time.

One other change I should propose (but is not in this patch) is that
the definition for SMBUS_IO_BASE be moved to i82371eb.h from
i82371eb_early_smbus.c. Makes more sense for a definition that may be
referenced from some other places.

I was thinking to ask if someone know where to set this I/O base
address, and turns out no initialization whatsoever was being done.
:-O

Enjoy.

Signed-off-by: Keith Hui <buurin at gmail.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: piix4pm.patch
Type: application/octet-stream
Size: 4279 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100328/57db0648/attachment.obj>