[coreboot] FW: VGA rom can not be loaded by SEABIOS

[Wang, Qingpei]

Hi Kevin,

   I have already found the reason. It is only because "791F != 791f". I
just use 791F in cbfs.

 

Jason Wang

BeiJing Technology Development Center

Advanced Micro Devices (AMD)

 

________________________________

From: Jason Wang [mailto:wangqingpei at gmail.com] 
Sent: Thursday, March 18, 2010 12:05 PM
To: Wang, Qingpei
Subject: Fwd: [coreboot] VGA rom can not be loaded by SEABIOS

 

 

---------- Forwarded message ----------
From: Kevin O'Connor <kevin at koconnor.net>
Date: Wed, Mar 17, 2010 at 11:33 PM
Subject: Re: [coreboot] VGA rom can not be loaded by SEABIOS
To: Jason Wang <wangqingpei at gmail.com>



On Wed, Mar 17, 2010 at 11:29:33PM +0800, Jason Wang wrote:
> the log which i attached is because of the CONFIG_COREBOOT_FLASH. but
after
> i set that, i will post the new log tomorrow.
> By the way, after CONFIG_COREBOOT_FLASH is set. seabios will load the
vgarom
> by the file name prefix with "vgaroms/" right?

It will load both "pciVVVV,DDDD.rom" and "vgaroms/*" - the
pciVVVV,DDDD.rom format is preferred.

-Kevin




-- 
Wang Qing Pei 
MSN:wangqingpei at hotmail.com <mailto:MSN%3Awangqingpei at hotmail.com> 
Gmail:wangqingpei at gmail.com <mailto:Gmail%3Awangqingpei at gmail.com> 
Phone:86+13426369984

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100318/f6b6b727/attachment.html>