[coreboot] [commit] r5180 - in trunk/src/mainboard/msi: . ms9652_fam10
repository service
svn at coreboot.org
Mon Mar 1 11:56:52 CET 2010
Author: oxygene
Date: Mon Mar 1 11:56:51 2010
New Revision: 5180
URL: http://tracker.coreboot.org/trac/coreboot/changeset/5180
Log:
Add msi/ms9652_fam10 board.
Updated Timothy's patch to match recent changes in the tree. It's build tested.
Signed-off-by: Timothy Pearson <tpearson at raptorengineeringinc.com>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Added:
trunk/src/mainboard/msi/ms9652_fam10/
trunk/src/mainboard/msi/ms9652_fam10/Kconfig
trunk/src/mainboard/msi/ms9652_fam10/acpi_tables.c
trunk/src/mainboard/msi/ms9652_fam10/chip.h
trunk/src/mainboard/msi/ms9652_fam10/cmos.layout
trunk/src/mainboard/msi/ms9652_fam10/devicetree.cb
trunk/src/mainboard/msi/ms9652_fam10/dsdt.asl
trunk/src/mainboard/msi/ms9652_fam10/get_bus_conf.c
trunk/src/mainboard/msi/ms9652_fam10/irq_tables.c
trunk/src/mainboard/msi/ms9652_fam10/mainboard.c
trunk/src/mainboard/msi/ms9652_fam10/mb_sysconf.h
trunk/src/mainboard/msi/ms9652_fam10/mptable.c
trunk/src/mainboard/msi/ms9652_fam10/resourcemap.c
trunk/src/mainboard/msi/ms9652_fam10/romstage.c
trunk/src/mainboard/msi/ms9652_fam10/spd_addr.h
Modified:
trunk/src/mainboard/msi/Kconfig
Modified: trunk/src/mainboard/msi/Kconfig
==============================================================================
--- trunk/src/mainboard/msi/Kconfig Mon Mar 1 11:30:08 2010 (r5179)
+++ trunk/src/mainboard/msi/Kconfig Mon Mar 1 11:56:51 2010 (r5180)
@@ -30,6 +30,7 @@
source "src/mainboard/msi/ms7260/Kconfig"
source "src/mainboard/msi/ms9185/Kconfig"
source "src/mainboard/msi/ms9282/Kconfig"
+source "src/mainboard/msi/ms9652_fam10/Kconfig"
endchoice
Added: trunk/src/mainboard/msi/ms9652_fam10/Kconfig
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/Kconfig Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,288 @@
+config BOARD_MSI_MS9652_FAM10
+ bool "MS9652 Fam10 (Speedster K9ND)"
+ select ARCH_X86
+ select CPU_AMD_SOCKET_F_1207
+ select NORTHBRIDGE_AMD_AMDFAM10
+ select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX
+ select SOUTHBRIDGE_NVIDIA_MCP55
+ select SUPERIO_WINBOND_W83627EHG
+ select HAVE_BUS_CONFIG
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select USE_PRINTK_IN_CAR
+ select USE_DCACHE_RAM
+ select HAVE_HARD_RESET
+ select BOARD_ROMSIZE_KB_512
+ select ENABLE_APIC_EXT_ID
+ select AMDMCT
+ select TINY_BOOTBLOCK
+
+config MAINBOARD_DIR
+ string
+ default msi/ms9652_fam10
+ depends on BOARD_MSI_MS9652_FAM10
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc4000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x0c000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config DCACHE_RAM_GLOBAL_VAR_SIZE
+ hex
+ default 0x04000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config CONFIG_ACPI_SSDTX_NUM
+ hex
+ default 0x1F
+ depends on BOARD_MSI_MS9652_FAM10
+
+config USE_FALLBACK_IMAGE
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HAVE_FALLBACK_BOOT
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config CONFIG_USE_FAILOVER_IMAGE
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config CONFIG_HAVE_FAILOVER_BOOT
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config GENERATE_PIRQ_TABLE
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config CONFIG_IRQ_SLOT_COUNT
+ hex
+ default 0x0b
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HAVE_OPTION_TABLE
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAX_CPUS
+ int
+ default 8
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+ depends on BOARD_MSI_MS9652_FAM10
+
+config LOGICAL_CPUS
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config IOAPIC
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config SMP
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config STACK_SIZE
+ hex
+ default 0x20000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HEAP_SIZE
+ hex
+ default 0x20000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config USE_OPTION_TABLE
+ bool
+ default n
+ depends on BOARD_MSI_MS9652_FAM10
+
+config LB_CKS_RANGE_START
+ int
+ default 49
+ depends on BOARD_MSI_MS9652_FAM10
+
+config LB_CKS_RANGE_END
+ int
+ default 122
+ depends on BOARD_MSI_MS9652_FAM10
+
+config LB_CKS_LOC
+ int
+ default 123
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "MS-9256"
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+ hex
+ default 0x1462
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+ hex
+ default 0x9652
+ depends on BOARD_MSI_MS9652_FAM10
+
+config RAMBASE
+ hex
+ default 0x00200000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config TTYS0_BAUD
+ int
+ default 115200
+ depends on BOARD_MSI_MS9652_FAM10
+
+config TTYS0_BASE
+ hex
+ default 0x3f8
+ depends on BOARD_MSI_MS9652_FAM10
+
+config TTYS0_LCS
+ int
+ default 3
+ depends on BOARD_MSI_MS9652_FAM10
+
+config DEFAULT_CONSOLE_LOGLEVEL
+ int
+ default 9
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAXIMUM_CONSOLE_LOGLEVEL
+ int
+ default 9
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config CONSOLE_SERIAL8250
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config CONSOLE_VGA
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config PCI_ROM_RUN
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config USBDEBUG_DIRECT
+ bool
+ default n
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x100000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HT_CHAIN_UNITID_BASE
+ hex
+ default 0x20
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HT_CHAIN_END_UNITID_BASE
+ hex
+ default 0x00
+ depends on BOARD_MSI_MS9652_FAM10
+
+config SB_HT_CHAIN_ON_BUS0
+ int
+ default 1
+ depends on BOARD_MSI_MS9652_FAM10
+
+config SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config VAR_MTRR_HOLE
+ bool
+ default n
+ depends on BOARD_MSI_MS9652_FAM10
+
+config USE_INIT
+ bool
+ default n
+ depends on BOARD_MSI_MS9652_FAM10
+
+config SERIAL_CPU_INIT
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
+
+config APIC_ID_OFFSET
+ hex
+ default 0x00
+ depends on BOARD_MSI_MS9652_FAM10
+
+config LIFT_BSP_APIC_ID
+ bool
+ default 1
+ depends on BOARD_MSI_MS9652_FAM10
+
+config RAMTOP
+ hex
+ default 0x1000000
+ depends on BOARD_MSI_MS9652_FAM10
+
+config MEM_TRAIN_SEQ
+ int
+ default 2
+ depends on BOARD_MSI_MS9652_FAM10
+
+config WAIT_BEFORE_CPUS_INIT
+ bool
+ default n
+ depends on BOARD_MSI_MS9652_FAM10
+
+config AMD_UCODE_PATCH_FILE
+ string
+ default "mc_patch_01000096.h"
+ depends on BOARD_MSI_MS9652_FAM10
+
+config ID_SECTION_OFFSET
+ hex
+ default 0x80
+ depends on BOARD_MSI_MS9652_FAM10
+
+config HT3_SUPPORT
+ bool
+ default y
+ depends on BOARD_MSI_MS9652_FAM10
Added: trunk/src/mainboard/msi/ms9652_fam10/acpi_tables.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/acpi_tables.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,207 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Written by Stefan Reinauer <stepan at openbios.org>.
+ * ACPI FADT, FACS, and DSDT table support added by
+ *
+ * Copyright (C) 2004 Stefan Reinauer <stepan at openbios.org>
+ * Copyright (C) 2005 Nick Barker <nick.barker9 at btinternet.com>
+ * Copyright (C) 2007, 2008 Rudolf Marek <r.marek at assembler.cz>
+ * Copyright (C) 2009 Harald Gutmann <harald.gutmann at gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci_ids.h>
+//#include <../../../northbridge/amd/amdfam10/amdfam10_acpi.h>
+#include <cpu/amd/model_fxx_powernow.h>
+#include <device/pci.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "mb_sysconf.h"
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Not implemented */
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned int gsi_base = 0x18;
+ struct mb_sysconf_t *m;
+ //extern unsigned char bus_mcp55[8];
+ //extern unsigned apicid_mcp55;
+ extern void get_bus_conf(void);
+ unsigned sbdn;
+ struct resource *res;
+ device_t dev;
+
+ get_bus_conf();
+ sbdn = sysconf.sbdn;
+ m = sysconf.mb;
+
+ /* Create all subtables for processors. */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB IOAPIC. */
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ m->apicid_mcp55, res->base, 0);
+ }
+ }
+
+ /* Write NB IOAPIC. */
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ m->apicid_mcp55++, res->base, gsi_base);
+ }
+ }
+
+ /* IRQ9 ACPI active low. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* IRQ0 -> APIC IRQ2. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0x0);
+
+ /* Create all subtables for processors. */
+ current = acpi_create_madt_lapic_nmis(current,
+ MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+ //k8acpi_write_vars();
+ //amd_model_fxx_generate_powernow(0, 0, 0);
+ //return (unsigned long) (acpigen_get_current());
+ return 0;
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_mcfg_t *mcfg;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_slit_t *slit;
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16 byte. */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT table. */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* Clear all table memory. */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /* We explicitly add these tables later on: */
+ printk_debug("ACPI: * FACS\n");
+
+ /* we should align FACS to 64B as per ACPI specs */
+ current = ALIGN(current, 64);
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void *) dsdt, (void *) AmlCode,
+ ((acpi_header_t *) AmlCode)->length);
+ dsdt->checksum = 0; /* Don't trust iasl to get this right. */
+ dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
+ printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
+ dsdt->length);
+ printk_debug("ACPI: * FADT\n");
+
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ printk_debug("ACPI: * HPET\n");
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET timers Linux wants an MADT. */
+ printk_debug("ACPI: * MADT\n");
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdp, madt);
+
+ printk_debug("ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ acpi_add_table(rsdp, mcfg);
+
+ printk_debug("ACPI: * SRAT\n");
+ srat = (acpi_srat_t *) current;
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdp, srat);
+
+ /* SLIT */
+ printk_debug("ACPI: * SLIT\n");
+ slit = (acpi_slit_t *) current;
+ acpi_create_slit(slit);
+ current+=slit->header.length;
+ acpi_add_table(rsdp, slit);
+
+ /* SSDT */
+ printk_debug("ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+
+ acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
Added: trunk/src/mainboard/msi/ms9652_fam10/chip.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/chip.h Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config {
+// int fixup_scsi;
+// int fixup_vga;
+};
Added: trunk/src/mainboard/msi/ms9652_fam10/cmos.layout
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/cmos.layout Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,119 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 quad_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 200Mhz
+8 1 166Mhz
+8 2 133Mhz
+8 3 100Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
Added: trunk/src/mainboard/msi/ms9652_fam10/devicetree.cb
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/devicetree.cb Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,155 @@
+## Copyright (C) 2010 Raptor Engineering
+## Written by Timothy Pearson <tpearson at raptorengineeringinc.com> for Raptor Engineering.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+
+chip northbridge/amd/amdfam10/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_F_1207
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdfam10 #mc0
+ device pci 18.0 on # SB on HT link 0.0
+ chip southbridge/nvidia/mcp55
+ device pci 0.0 on end # HT
+ device pci 1.0 on # LPC
+ chip superio/winbond/w83627ehg
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off # SERIAL_FLASH
+ io 0x60 = 0x100
+ end
+ device pnp 2e.7 off # GAME_MIDI_GIPO1
+ io 0x60 = 0x220
+ io 0x62 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.8 off end # WDTO_PLED
+ device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ irq 0x70 = 5
+ end
+ device pnp 2e.106 off # Serial flash
+ io 0x60 = 0x100
+ end
+ device pnp 2e.207 on # MIDI
+ io 0x62 = 0x330
+ irq 0x70 = 0xa
+ end
+ end
+ end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
+ end # SM
+ device pci 1.1 on # SM 1
+#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
+# chip drivers/generic/generic #PCIXA Slot1
+# device i2c 50 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot1
+# device i2c 51 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot2
+# device i2c 52 on end
+# end
+# chip drivers/generic/generic #PCI Slot1
+# device i2c 53 on end
+# end
+# chip drivers/generic/generic #Master MCP55 PCI-E
+# device i2c 54 on end
+# end
+# chip drivers/generic/generic #Slave MCP55 PCI-E
+# device i2c 55 on end
+# end
+# chip drivers/generic/generic #MAC EEPROM
+# device i2c 51 on end
+# end
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.1 on end # AZA
+ device pci 8.0 on end # NIC
+ device pci 9.0 on end # NIC
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
+ register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
+ register "mac_eeprom_addr" = "0x51"
+ end
+ end # device pci 18.0
+ device pci 18.0 on end # HT 1.0
+ device pci 18.0 on end # HT 2.0
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ end # mc0
+
+ end # PCI domain
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
+end #root_complex
Added: trunk/src/mainboard/msi/ms9652_fam10/dsdt.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/dsdt.asl Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,302 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9 at btinternet.com>
+ * (C) Copyright 2007, 2008 Rudolf Marek <r.marek at assembler.cz>
+ * (C) Copyright 2009 Harald Gutmann <harald.gutmann at gmx.net>
+ *
+ * ISA portions taken from QEMU acpi-dsdt.dsl.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
+{
+ Include ("../../../../src/northbridge/amd/amdk8/amdk8_util.asl")
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ */
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Top PCI device */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0CF8, // Address Length
+ ,, , TypeStatic)
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ */
+ Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* PCI Routing Table */
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */
+ Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */
+ Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */
+ Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */
+ Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */
+ })
+
+ Device (PEBF) /* PCI-E Bridge F */
+ {
+ Name (_ADR, 0x000F0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x07)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 },
+ })
+ }
+
+ Device (PEBE) /* PCI-E Bridge E */
+ {
+ Name (_ADR, 0x000E0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x06)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+
+ Device (PEBD) /* PCI-E Bridge D */
+ {
+ Name (_ADR, 0x000D0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x05)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 },
+ })
+ }
+
+ Device (PEBC) /* PCI-E Bridge C */
+ {
+ Name (_ADR, 0x000C0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x04)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 },
+ })
+ }
+
+ Device (PEBB) /* PCI-E Bridge B */
+ {
+ Name (_ADR, 0x000B0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x03)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 },
+ })
+ }
+
+ Device (PEBA) /* PCI-E Bridge A */
+ {
+ Name (_ADR, 0x000A0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+
+ Device (PCID) /* PCI Device */
+ {
+ Name (_ADR, 0x00060000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x01)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 },
+ Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 },
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */
+ Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 },
+ Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 },
+ Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 },
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */
+ Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 },
+ Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 },
+ Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 },
+ Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */
+ Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+ }
+
+ Device (ISA) {
+ Name (_ADR, 0x000010000)
+
+ /* PS/2 keyboard (seems to be important for WinXP install) */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP0, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ Return (TMP0)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP1, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {12}
+ })
+ Return (TMP1)
+ }
+ }
+
+ /* PS/2 floppy controller */
+ Device (FDC0)
+ {
+ Name (_HID, EisaId ("PNP0700"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () {
+ IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
+ IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ Return (BUF0)
+ }
+ }
+ /* Parallel Port */
+ Device (LPT1)
+ {
+ Name (_HID, EisaId ("PNP0400"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF1, ResourceTemplate () {
+ IO (Decode16, 0x0378, 0x0378, 0x01, 0x08)
+ IRQNoFlags () {7}
+ })
+ Return (BUF1)
+ }
+ }
+ /* Parallel Port ECP */
+ Device (ECP1)
+ {
+ Name (_HID, EisaId ("PNP0401"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF1, ResourceTemplate () {
+ IO (Decode16, 0x0378, 0x0378, 0x01, 0x04)
+ IO (Decode16, 0x0778, 0x0778, 0x01, 0x04)
+ IRQNoFlags() {7}
+ DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3}
+ })
+ Return (BUF1)
+ }
+ }
+ }
+ }
+}
Added: trunk/src/mainboard/msi/ms9652_fam10/get_bus_conf.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/get_bus_conf.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,140 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/quadcore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include <stdlib.h>
+#include "mb_sysconf.h"
+
+// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
+struct mb_sysconf_t mb_sysconf;
+
+/* Here you only need to set value in pci1234 for HT-IO that could be
+installed or not You may need to preset pci1234 for HTIO board, please
+refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */
+static u32 pci1234x[] = {
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+ 0x0000ffc, 0x0000ffc,
+ };
+
+
+/* HT Chain device num, actually it is unit id base of every ht device
+in chain, assume every chain only have 4 ht device at most */
+
+static unsigned hcdnx[] = {
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+ 0x20202020, 0x20202020,
+};
+
+extern void get_pci1234(void);
+
+static unsigned get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+ unsigned apicid_base;
+ struct mb_sysconf_t *m;
+
+ device_t dev;
+ int i, j;
+
+ printk_spew("get_bus_conf()\n");
+
+ if(get_bus_conf_done==1) return; //do it only once
+
+ get_bus_conf_done = 1;
+
+ sysconf.mb = &mb_sysconf;
+
+ m = sysconf.mb;
+ memset(m, 0, sizeof(struct mb_sysconf_t));
+
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for(i=0;i<sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
+
+ get_pci1234();
+
+ m->bus_type[0] = 1; //pci
+ sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+ m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff;
+
+ /* MCP55 */
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
+ if (dev) {
+ m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
+ }
+
+ for(i=2; i<8;i++) {
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
+ if (dev) {
+ m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
+ }
+ }
+
+ for(i=0; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+ unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff;
+ for (j = busn; j <= busn_max; j++)
+ m->bus_type[j] = 1;
+ if(m->bus_isa <= busn_max)
+ m->bus_isa = busn_max + 1;
+ printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+ }
+
+/*I/O APICs: APIC ID Version State Address*/
+#if CONFIG_LOGICAL_CPUS==1
+ apicid_base = get_apicid_base(1);
+ printk_spew("CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n");
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+ printk_spew("CONFIG_LOGICAL_CPUS==0: apicid_base: %08x\n");
+#endif
+ m->apicid_mcp55 = apicid_base+0;
+}
Added: trunk/src/mainboard/msi/ms9652_fam10/irq_tables.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/irq_tables.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,138 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This file was generated by getpir.c, do not modify!
+ * (but if you do, please run checkpir on it to verify)
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "mb_sysconf.h"
+
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+ uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
+ uint8_t slot, uint8_t rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+extern void get_bus_conf(void);
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ unsigned slot_num;
+ uint8_t *v;
+ struct mb_sysconf_t *m;
+ unsigned sbdn;
+
+ uint8_t sum=0;
+ int i;
+
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ sbdn = sysconf.sbdn;
+ m = sysconf.mb;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+ pirq = (void *)(addr);
+ v = (uint8_t *)(addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = m->bus_mcp55[0];
+ pirq->rtr_devfn = ((sbdn+6)<<3)|0;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x10de;
+ pirq->rtr_device = 0x0370;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *) ( &pirq->checksum + 1);
+ slot_num = 0;
+//pci bridge
+ write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
+
+ write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ }
+
+#if CONFIG_CBB
+ write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ if(sysconf.nodes>32) {
+ write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ }
+#endif
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk_info("done.\n");
+
+ return (unsigned long) pirq_info;
+
+}
Added: trunk/src/mainboard/msi/ms9652_fam10/mainboard.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/mainboard.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("MSI MS-9652 Mainboard (Family 10)")
+};
Added: trunk/src/mainboard/msi/ms9652_fam10/mb_sysconf.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/mb_sysconf.h Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+ unsigned char bus_isa;
+ unsigned char bus_mcp55[8]; //1
+ unsigned apicid_mcp55;
+ unsigned bus_type[256];
+
+};
+
+#endif
+
Added: trunk/src/mainboard/msi/ms9652_fam10/mptable.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/mptable.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,162 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+extern void get_bus_conf(void);
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "MSI ";
+ static const char productid[12] = "K9ND MS-9652";
+ struct mp_config_table *mc;
+ struct mb_sysconf_t *m;
+ unsigned sbdn;
+
+ int i,j;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+ sbdn = sysconf.sbdn;
+ m = sysconf.mb;
+
+/*Bus: Bus ID Type*/
+ /* define bus and isa numbers */
+ for(j= 0; j < 256 ; j++) {
+ if(m->bus_type[j])
+ smp_write_bus(mc, j, "PCI ");
+ }
+ smp_write_bus(mc, m->bus_isa, "ISA ");
+
+/*I/O APICs: APIC ID Version State Address*/
+ {
+ device_t dev;
+ struct resource *res;
+ uint32_t dword;
+
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
+ }
+
+ dword = 0x43c6c643;
+ pci_write_config32(dev, 0x7c, dword);
+
+ dword = 0x81001a00;
+ pci_write_config32(dev, 0x80, dword);
+
+ dword = 0xd00012d2;
+ pci_write_config32(dev, 0x84, dword);
+
+ }
+
+
+ }
+
+ /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_mcp55, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_mcp55, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_mcp55, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_mcp55, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_mcp55, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_mcp55, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_mcp55, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
+
+ for(j=7; j>=2; j--) {
+ if(!m->bus_mcp55[j]) continue;
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
+ }
+ }
+
+ for(j=0; j<1; j++)
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
+ }
+
+/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
Added: trunk/src/mainboard/msi/ms9652_fam10/resourcemap.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/resourcemap.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,287 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static void setup_mb_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
+// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00004000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ /* Verified against board configuration registers after normal proprietary BIOS boot */
+ //PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001033,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration region i
+ */
+ /* Verified against board configuration registers after normal proprietary BIOS boot */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ };
+
+ int max;
+ max = ARRAY_SIZE(register_values);
+ setup_resource_map(register_values, max);
+}
+
Added: trunk/src/mainboard/msi/ms9652_fam10/romstage.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/romstage.c Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,389 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu at amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __PRE_RAM__
+
+#define RAMINIT_SYSINFO 1
+
+#define FAM10_SCAN_PCI_BUS 0
+#define FAM10_ALLOCATE_IO_RANGE 1
+
+#define QRANK_DIMM_SUPPORT 1
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+#define FAM10_SET_FIDVID 1
+#define FAM10_SET_FIDVID_CORE_RANGE 0
+
+#define DBGP_DEFAULT 7
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+
+ static void post_code(u8 value) {
+ outb(value, 0x80);
+ }
+
+#if CONFIG_USE_FAILOVER_IMAGE==0
+#include "arch/i386/lib/console.c"
+#if CONFIG_USBDEBUG_DIRECT
+#include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c"
+#include "pc80/usbdebug_direct_serial.c"
+#endif
+#include "lib/ramtest.c"
+
+#include <cpu/amd/model_10xxx_rev.h>
+
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
+
+#if CONFIG_USE_FAILOVER_IMAGE==0
+
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdfam10/debug.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+
+#include "northbridge/amd/amdfam10/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
+#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC)
+
+#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdfam10/amdfam10.h"
+#include "northbridge/amd/amdht/ht_wrapper.c"
+
+#include "include/cpu/x86/mem.h"
+#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
+#include "northbridge/amd/amdfam10/raminit_amdmct.c"
+#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+
+#include "resourcemap.c"
+
+#include "cpu/amd/quadcore/quadcore.c"
+
+#define MCP55_NUM 1
+#define MCP55_USE_NIC 1
+#define MCP55_USE_AZA 1
+
+#define MCP55_PCI_E_X_0 1
+
+#define MCP55_MB_SETUP \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
+
+#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
+#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_10xxx/init_cpus.c"
+
+#include "cpu/amd/model_10xxx/fidvid.c"
+
+#endif
+
+#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
+
+#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
+#include "northbridge/amd/amdfam10/early_ht.c"
+
+static void sio_setup(void)
+{
+
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+
+
+}
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ set_bsp_node_CHtExtNodeCfgEn();
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the mcp55 */
+ mcp55_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
+
+ fallback_image:
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
+#endif
+ ;
+}
+#endif
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+ #if CONFIG_USE_FAILOVER_IMAGE==1
+ failover_process(bist, cpu_init_detectedx);
+ #else
+ real_main(bist, cpu_init_detectedx);
+ #endif
+#else
+ #if CONFIG_USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+ #endif
+ real_main(bist, cpu_init_detectedx);
+#endif
+}
+
+#if CONFIG_USE_FAILOVER_IMAGE==0
+#include "spd_addr.h"
+#include "cpu/amd/microcode/microcode.c"
+#include "cpu/amd/model_10xxx/update_microcode.c"
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+ u32 bsp_apicid = 0;
+ u32 val;
+ u8 reg;
+ u32 wants_reset;
+ msr_t msr;
+
+ post_code(0x30);
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
+
+ post_code(0x32);
+
+ pnp_enter_ext_func_mode(SERIAL_DEV);
+ /* We have 24MHz input. */
+ reg = pnp_read_config(SERIAL_DEV, 0x24);
+ pnp_write_config(SERIAL_DEV, 0x24, (reg & 0xbf));
+ pnp_exit_ext_func_mode(SERIAL_DEV);
+
+ w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ uart_init();
+ console_init();
+ printk_debug("\n");
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+#if CONFIG_USBDEBUG_DIRECT
+ mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
+ early_usbdebug_direct_init();
+#endif
+
+ val = cpuid_eax(1);
+ printk_debug("BSP Family_Model: %08x \n", val);
+ printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
+ printk_debug("bsp_apicid = %02x \n", bsp_apicid);
+ printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
+
+ /* Setup sysinfo defaults */
+ set_sysinfo_in_ram(0);
+
+ update_microcode(val);
+ post_code(0x33);
+
+ cpuSetAMDMSR();
+ post_code(0x34);
+
+ amd_ht_init(sysinfo);
+ post_code(0x35);
+
+ /* Setup nodes PCI space and start core 0 AP init. */
+ finalize_node_setup(sysinfo);
+ printk_debug("finalize_node_setup done \n");
+
+ /* Setup any mainboard PCI settings etc. */
+ printk_debug("setup_mb_resource_map begin \n");
+ setup_mb_resource_map();
+ printk_debug("setup_mb_resource_map end \n");
+ post_code(0x36);
+
+ /* wait for all the APs core0 started by finalize_node_setup. */
+ /* FIXME: A bunch of cores are going to start output to serial at once.
+ * It would be nice to fixup prink spinlocks for ROM XIP mode.
+ * I think it could be done by putting the spinlock flag in the cache
+ * of the BSP located right after sysinfo.
+ */
+ wait_all_core0_started();
+
+#if CONFIG_LOGICAL_CPUS==1
+ /* Core0 on each node is configured. Now setup any additional cores. */
+ printk_debug("start_other_cores()\n");
+ start_other_cores();
+ post_code(0x37);
+ printk_debug("wait_all_other_cores_started()\n");
+ wait_all_other_cores_started(bsp_apicid);
+#endif
+
+ post_code(0x38);
+
+#if FAM10_SET_FIDVID == 1
+ msr = rdmsr(0xc0010071);
+ printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+
+ /* FIXME: The sb fid change may survive the warm reset and only
+ * need to be done once.*/
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+ post_code(0x39);
+
+ if (!warm_reset_detect(0)) { // BSP is node 0
+ init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
+ } else {
+ init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
+ }
+
+ post_code(0x3A);
+
+ /* show final fid and vid */
+ msr=rdmsr(0xc0010071);
+ printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+#endif
+
+ wants_reset = mcp55_early_setup_x();
+
+ /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
+ if (!warm_reset_detect(0)) {
+ print_info("...WARM RESET...\n\n\n");
+ soft_reset();
+ die("After soft_reset_x - shouldn't see this message!!!\n");
+ }
+
+ if (wants_reset)
+ printk_debug("mcp55_early_setup_x wanted additional reset!\n");
+
+ post_code(0x3B);
+
+ /* It's the time to set ctrl in sysinfo now; */
+ printk_debug("fill_mem_ctrl()\n");
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ post_code(0x3D);
+
+ printk_debug("enable_smbus()\n");
+ enable_smbus();
+ post_code(0x3E);
+
+ memreset_setup();
+ post_code(0x40);
+
+ printk_debug("raminit_amdmct()\n");
+ raminit_amdmct(sysinfo);
+ post_code(0x41);
+
+ printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
+ post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
+ post_code(0x43); // Should never see this post code.
+}
+
+
+#endif
Added: trunk/src/mainboard/msi/ms9652_fam10/spd_addr.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/msi/ms9652_fam10/spd_addr.h Mon Mar 1 11:56:51 2010 (r5180)
@@ -0,0 +1,110 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * This file defines the SPD addresses for the mainboard. Must be included in
+ * cache_as_ram_auto.c
+ */
+
+#define RC00 0
+#define RC01 1
+#define RC02 2
+#define RC03 3
+#define RC04 4
+#define RC05 5
+#define RC06 6
+#define RC07 7
+#define RC08 8
+#define RC09 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+#define RC16 16
+#define RC17 17
+#define RC18 18
+#define RC19 19
+#define RC20 20
+#define RC21 21
+#define RC22 22
+#define RC23 23
+#define RC24 24
+#define RC25 25
+#define RC26 26
+#define RC27 27
+#define RC28 28
+#define RC29 29
+#define RC30 30
+#define RC31 31
+
+#define RC32 32
+#define RC33 33
+#define RC34 34
+#define RC35 35
+#define RC36 36
+#define RC37 37
+#define RC38 38
+#define RC39 39
+#define RC40 40
+#define RC41 41
+#define RC42 42
+#define RC43 43
+#define RC44 44
+#define RC45 45
+#define RC46 46
+#define RC47 47
+#define RC48 48
+#define RC49 49
+#define RC50 50
+#define RC51 51
+#define RC52 52
+#define RC53 53
+#define RC54 54
+#define RC55 55
+#define RC56 56
+#define RC57 57
+#define RC58 58
+#define RC59 59
+#define RC60 60
+#define RC61 61
+#define RC62 62
+#define RC63 63
+
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+#define DIMM4 0x54
+#define DIMM5 0x55
+#define DIMM6 0x56
+#define DIMM7 0x57
+
+
+static const u8 spd_addr[] = {
+ //first node
+ RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ //second node
+ RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0,
+#endif
+};
+
More information about the coreboot
mailing list