[coreboot] request for comments: Gigabyte GA-945PL-S3 (rev. 1.0)

[John Wyzer]

On 17/06/10 22:07, Anders Jenbo wrote:
> All your chips seams to be supported so getting your board working
> shouldn't be to hard.
> 
> As fare as i can see on flashrom.org, the status for writing to "SST
> SST25VF040.REMS" is just unknown, if it really doesn't work, then
> another option might be to find a compatible chip that is supported for
> write. In any case you will probably need to desolder it so that you can
> switch back to the original in case your port doesn't work in the first
> attempt (likely).
> 
> I sugest that you copy the code for Kontron 986LCD-M/mITX, as it seams
> the closes working match. You might also take a peak at Tyan Tiger K8W
> (S2875) as it uses the same SuperIO as your board.


Thanks for the reply!
Will do so as soon as other projects are out of the way :-)
Best regards!