[coreboot] Indtast Bcc problems with M2V-MX SE + VGA
anders@jenbo.dk
anders at jenbo.dk
Mon Jun 14 18:38:11 CEST 2010
Worked for me on a system with an onboard card based on i810th chipset.
Mvh Anders
----- Reply message -----
Fra: "Andrew Morgan" <ziltro at ziltro.com>
Dato: man., jun. 14, 2010 17:27
Emne: [coreboot] problems with M2V-MX SE + VGA
Til: <coreboot at coreboot.org>
Just a thought, have you tried with no VGA BIOS? You won't get any
screen output until X loads, but after that point it should work fine,
while in X.
On a plug-in card that's how it works but I don't know if the onboard
chip will be enabled by default, enabled by Coreboot or disabled because
the VGA BIOS isn't run.
I don't know exactly what this might prove but it is something to try
anyway.
--
Andrew.
--
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100614/ccc5ef73/attachment.html>
More information about the coreboot
mailing list