[coreboot] PATCH: ECS P6IWP-Fe

Joseph Smith joe at settoplinux.org
Wed Jun 9 14:44:42 CEST 2010




On Wed, 09 Jun 2010 07:16:48 -0400, Joseph Smith <joe at settoplinux.org>
wrote:
> 
> 
> 
> On Wed, 9 Jun 2010 13:00:26 +0200, Stefan Reinauer
> <stefan.reinauer at coresystems.de> wrote:
>>
>> On 09.06.2010, at 12:47, Joseph Smith <joe at settoplinux.org> wrote:
>>
>>>
>>>
>>>
>>> On Wed, 09 Jun 2010 10:09:21 +0200, Stefan Reinauer
>> <stepan at coresystems.de
>>> >
>>> wrote:
>>>> On 6/9/10 1:57 AM, Anders Jenbo wrote:
>>>>> This patch adds the ECS P6IWP-Fe board to coreboot.
>>>>>
>>>>> Signed-off-by: Anders Jenbo <anders at jenbo.dk>
>>>>
>>>> Thanks a lot!
>>>>
>>>> Acked-by: Stefan Reinauer <stepan at coresystems.de>
>>>> and checked in as r5623
>>>>
>>>> But please add a license header to the device tree as well in an
>>>> extra
>>>> patch..
>>>>
>>> Yes thanks Anders :-)
>>> One more suggestion. I think from this point forward there is really
>>> no
>>> excuse for any Intel 440bx and up to be using romcc. I feel there
>>> should be
>>> a new rule, any new boards 440bx and up need to be running CAR for a
>>> Ack.
>>> Other wise that will be just one more board to back paddle to CAR.
>>> Anyone
>>> else have a thought on this?
>>>
>>
>> Since people always copy from existing boards and keep changing them
>> until it works, a patch that moves all existing 440 boards to CAR
>> would most likely solve the problem better than a rule. Want to give
>> it a try?
>>
> I could but not sure how much sense that would make considering I do not
> have a 440bx to test....
> 
> On the other hand I do have some i810's, That chip I would be glad to
> convert :-)
> 
Yes, this is going to be a new side project. 
Hey maybe a i815 port will even come out of it :-)

-- 
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org





More information about the coreboot mailing list