[coreboot] [commit] r5031 - in trunk: src/mainboard src/mainboard/roda src/mainboard/roda/rk886ex src/mainboard/roda/rk886ex/acpi targets targets/roda targets/roda/rk886ex
svn at coreboot.org
svn at coreboot.org
Sun Jan 17 15:08:18 CET 2010
Author: stepan
Date: 2010-01-17 15:08:17 +0100 (Sun, 17 Jan 2010)
New Revision: 5031
Added:
trunk/src/mainboard/roda/
trunk/src/mainboard/roda/Kconfig
trunk/src/mainboard/roda/rk886ex/
trunk/src/mainboard/roda/rk886ex/Config.lb
trunk/src/mainboard/roda/rk886ex/Kconfig
trunk/src/mainboard/roda/rk886ex/Makefile.inc
trunk/src/mainboard/roda/rk886ex/Options.lb
trunk/src/mainboard/roda/rk886ex/acpi/
trunk/src/mainboard/roda/rk886ex/acpi/battery.asl
trunk/src/mainboard/roda/rk886ex/acpi/ec.asl
trunk/src/mainboard/roda/rk886ex/acpi/gpe.asl
trunk/src/mainboard/roda/rk886ex/acpi/i945_pci_irqs.asl
trunk/src/mainboard/roda/rk886ex/acpi/ich7_pci_irqs.asl
trunk/src/mainboard/roda/rk886ex/acpi/mainboard.asl
trunk/src/mainboard/roda/rk886ex/acpi/platform.asl
trunk/src/mainboard/roda/rk886ex/acpi/superio.asl
trunk/src/mainboard/roda/rk886ex/acpi/thermal.asl
trunk/src/mainboard/roda/rk886ex/acpi/video.asl
trunk/src/mainboard/roda/rk886ex/acpi_tables.c
trunk/src/mainboard/roda/rk886ex/auto.c
trunk/src/mainboard/roda/rk886ex/chip.h
trunk/src/mainboard/roda/rk886ex/cmos.layout
trunk/src/mainboard/roda/rk886ex/devicetree.cb
trunk/src/mainboard/roda/rk886ex/dmi.h
trunk/src/mainboard/roda/rk886ex/dsdt.asl
trunk/src/mainboard/roda/rk886ex/ec.c
trunk/src/mainboard/roda/rk886ex/ec.h
trunk/src/mainboard/roda/rk886ex/fadt.c
trunk/src/mainboard/roda/rk886ex/irq_tables.c
trunk/src/mainboard/roda/rk886ex/m3885.c
trunk/src/mainboard/roda/rk886ex/m3885.h
trunk/src/mainboard/roda/rk886ex/mainboard.c
trunk/src/mainboard/roda/rk886ex/mainboard_smi.c
trunk/src/mainboard/roda/rk886ex/mptable.c
trunk/src/mainboard/roda/rk886ex/rtl8168.c
trunk/targets/roda/
trunk/targets/roda/rk886ex/
trunk/targets/roda/rk886ex/Config-abuild.lb
trunk/targets/roda/rk886ex/Config.lb
Modified:
trunk/src/mainboard/Kconfig
Log:
Add support for the Roda RK886EX a.k.a Rocky III+ ruggedised notebook
http://www.roda-computer.com/en/products/notebooks/rocky-iii-rk886ex.html
Signed-off-by: Stefan Reinauer <stepan at coresystems.de>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Peter Stuge <peter at stuge.se>
Modified: trunk/src/mainboard/Kconfig
===================================================================
--- trunk/src/mainboard/Kconfig 2010-01-17 13:54:08 UTC (rev 5030)
+++ trunk/src/mainboard/Kconfig 2010-01-17 14:08:17 UTC (rev 5031)
@@ -74,6 +74,8 @@
bool "PC Engines"
config VENDOR_RCA
bool "RCA"
+config VENDOR_RODA
+ bool "Roda"
config VENDOR_SOYO
bool "Soyo"
config VENDOR_SUNW
@@ -282,6 +284,11 @@
config MAINBOARD_VENDOR
string
+ default "Roda"
+ depends on VENDOR_RODA
+
+config MAINBOARD_VENDOR
+ string
default "Soyo"
depends on VENDOR_SOYO
@@ -370,6 +377,7 @@
source "src/mainboard/olpc/Kconfig"
source "src/mainboard/pcengines/Kconfig"
source "src/mainboard/rca/Kconfig"
+source "src/mainboard/roda/Kconfig"
source "src/mainboard/soyo/Kconfig"
source "src/mainboard/sunw/Kconfig"
source "src/mainboard/supermicro/Kconfig"
Added: trunk/src/mainboard/roda/Kconfig
===================================================================
--- trunk/src/mainboard/roda/Kconfig (rev 0)
+++ trunk/src/mainboard/roda/Kconfig 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,7 @@
+choice
+ prompt "Mainboard model"
+ depends on VENDOR_RODA
+
+source "src/mainboard/roda/rk886ex/Kconfig"
+
+endchoice
Added: trunk/src/mainboard/roda/rk886ex/Config.lb
===================================================================
--- trunk/src/mainboard/roda/rk886ex/Config.lb (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/Config.lb 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,237 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+##
+
+##
+## Only use the option table in a normal image
+##
+default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+
+##
+## Image size calculation
+##
+
+include /config/nofailovercalculation.lb
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+driver rtl8168.o
+object ec.o
+object m3885.o
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end
+
+if CONFIG_GENERATE_ACPI_TABLES
+ object fadt.o
+ object acpi_tables.o
+ makerule dsdt.c
+ depends "$(CONFIG_MAINBOARD)/dsdt.asl"
+ action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl"
+ action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl"
+ action "mv $(CURDIR)/dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+end
+
+if CONFIG_USE_INIT
+
+makerule ./auto.o
+ depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@"
+end
+
+else
+
+makerule ./auto.inc
+ depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
+ action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
+end
+
+end
+
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ ldscript /cpu/x86/car/cache_as_ram.lds
+end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if CONFIG_USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+##
+## Setup Cache-As-Ram
+##
+mainboardinit cpu/intel/model_6ex/cache_as_ram.inc
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if CONFIG_USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+if CONFIG_USE_INIT
+initobject auto.o
+else
+mainboardinit ./auto.inc
+end
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i945
+
+ device apic_cluster 0 on
+ chip cpu/intel/socket_mFCPGA478
+ device apic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ # auto detection:
+ #device pci 01.0 off end # i945 PCIe root port
+ #device pci 02.0 on end # vga controller
+ #device pci 02.1 on end # display controller
+
+ chip southbridge/intel/i82801gx
+ register "pirqa_routing" = "0x0b"
+ register "pirqb_routing" = "0x0b"
+ register "pirqc_routing" = "0x0b"
+ register "pirqd_routing" = "0x0b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x0b"
+ register "pirqh_routing" = "0x0b"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "gpi13_routing" = "2"
+ register "gpi8_routing" = "1"
+ register "gpi7_routing" = "2"
+ register "gpe0_en" = "0x20800007"
+
+ register "ide_legacy_combined" = "0x1"
+ register "ide_enable_primary" = "0x1"
+ register "ide_enable_secondary" = "0x0"
+ register "sata_ahci" = "0x0"
+
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe
+ device pci 1c.1 on end # PCIe
+ device pci 1c.2 on end # PCIe
+ #device pci 1c.3 off end # PCIe port 4
+ #device pci 1c.4 off end # PCIe port 5
+ #device pci 1c.5 off end # PCIe port 6
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.3 on end # USB UHCI
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1e.0 on
+ chip southbridge/ti/pci7420
+ register "smartcard_enabled" = "0x0"
+ device pci 3.0 on end
+ device pci 3.1 on end
+ device pci 3.2 on end
+ device pci 3.3 off end # smartcard
+ end
+ end # PCI bridge
+ #device pci 1e.2 off end # AC'97 Audio
+ #device pci 1e.3 off end # AC'97 Modem
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47n227
+ device pnp 2e.1 off # Parallel port
+ end
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 off # Keyboard+Mouse
+ # io 0x60 = 0x60
+ # io 0x62 = 0x64
+ # irq 0x70 = 1
+ # irq 0x72 = 12
+ end
+ end
+ chip superio/renesas/m3885x
+ device pnp ff.1 on # dummy address
+ end
+ end
+
+ end
+ #device pci 1f.1 off end # IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
+ #device pci 1f.4 off end # Realtek ID Codec
+ end
+ end
+end
Added: trunk/src/mainboard/roda/rk886ex/Kconfig
===================================================================
--- trunk/src/mainboard/roda/rk886ex/Kconfig (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/Kconfig 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,64 @@
+config BOARD_RODA_RK886EX
+ bool "RK886EX"
+ select ARCH_X86
+ select CPU_INTEL_CORE
+ select CPU_INTEL_SOCKET_MFCPGA478
+ select NORTHBRIDGE_INTEL_I945
+ select SOUTHBRIDGE_INTEL_I82801GX
+ select SOUTHBRIDGE_TI_PCI7420
+ select SUPERIO_SMSC_LPC47N227
+ select SUPERIO_RENESAS_M3885X
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select MMCONF_SUPPORT
+ select USE_PRINTK_IN_CAR
+ select AP_IN_SIPI_WAIT
+ select UDELAY_LAPIC
+ select HAVE_ACPI_TABLES
+ select HAVE_SMI_HANDLER
+ select BOARD_ROMSIZE_KB_1024
+
+config MAINBOARD_DIR
+ string
+ default roda/rk886ex
+ depends on BOARD_RODA_RK886EX
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xffdf8000
+ depends on BOARD_RODA_RK886EX
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_RODA_RK886EX
+
+config LB_CKS_RANGE_END
+ int
+ default 122
+ depends on BOARD_RODA_RK886EX
+
+config LB_CKS_LOC
+ int
+ default 123
+ depends on BOARD_RODA_RK886EX
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "RK886EX"
+ depends on BOARD_RODA_RK886EX
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xf0000000
+ depends on BOARD_RODA_RK886EX
+
+config IRQ_SLOT_COUNT
+ int
+ default 18
+ depends on BOARD_RODA_RK886EX
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+ depends on BOARD_RODA_RK886EX
Added: trunk/src/mainboard/roda/rk886ex/Makefile.inc
===================================================================
--- trunk/src/mainboard/roda/rk886ex/Makefile.inc (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/Makefile.inc 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,72 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+##
+
+driver-y += mainboard.o
+driver-y += m3885.o
+driver-y += ec.o
+driver-y += rtl8168.o
+
+obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
+obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o
+
+smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o
+
+# This is part of the conversion to init-obj and away from included code.
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/intel/model_6ex/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ $(CPP) -D__ACPI__ -P $(CPPFLAGS) -include $(obj)/config.h -I$(src)/mainboard/$(MAINBOARDDIR) $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl -o $(obj)/dsdt.asl
+ iasl -p dsdt -tc $(obj)/dsdt.asl
+ mv dsdt.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
Added: trunk/src/mainboard/roda/rk886ex/Options.lb
===================================================================
--- trunk/src/mainboard/roda/rk886ex/Options.lb (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/Options.lb 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,339 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+# Tables
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_GENERATE_ACPI_TABLES
+uses CONFIG_HAVE_MAINBOARD_RESOURCES
+uses CONFIG_HAVE_ACPI_RESUME
+# SMP
+uses CONFIG_SMP
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_AP_IN_SIPI_WAIT
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_IOAPIC
+# Image Size
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
+# Payload
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+# Build Internals
+uses CONFIG_RAMBASE
+uses CONFIG_ROMBASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_HAVE_SMI_HANDLER
+uses CONFIG_PCIE_CONFIGSPACE_HOLE
+uses CONFIG_MMCONF_SUPPORT
+uses CONFIG_MMCONF_BASE_ADDRESS
+uses CONFIG_GFXUMA
+#
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+# Timers
+uses CONFIG_UDELAY_LAPIC
+# Console
+uses CONFIG_USBDEBUG_DIRECT
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_PCI_OPTION_ROM_RUN_YABEL
+uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+uses CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES
+uses CONFIG_DEBUG
+# Toolchain
+uses CC
+uses HOSTCC
+uses CONFIG_CROSS_COMPILE
+uses CONFIG_OBJCOPY
+# Tweaks
+uses CONFIG_GDB_STUB
+uses CONFIG_MAX_REBOOT_CNT
+uses CONFIG_USE_WATCHDOG_ON_BOOT
+uses COREBOOT_EXTRA_VERSION
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+
+###
+### Build options
+###
+
+##
+##
+default CONFIG_MAX_REBOOT_CNT=3
+
+##
+## Use the watchdog to break out of a lockup condition
+##
+default CONFIG_USE_WATCHDOG_ON_BOOT=0
+
+##
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+##
+default CONFIG_ROM_SIZE=1024*1024
+
+
+##
+## Build code for the fallback boot
+##
+default CONFIG_HAVE_FALLBACK_BOOT=1
+
+##
+## Delay timer options
+##
+default CONFIG_UDELAY_LAPIC=1
+
+##
+## Build code to reset the motherboard from coreboot
+##
+default CONFIG_HAVE_HARD_RESET=1
+
+##
+## Build SMI handler
+##
+default CONFIG_HAVE_SMI_HANDLER=1
+
+##
+## Leave a hole for mmapped PCIe config space
+##
+
+default CONFIG_PCIE_CONFIGSPACE_HOLE=1
+default CONFIG_MMCONF_SUPPORT=1
+default CONFIG_MMCONF_BASE_ADDRESS=0xf0000000
+
+##
+## UMA
+##
+default CONFIG_GFXUMA=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default CONFIG_GENERATE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=18
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default CONFIG_GENERATE_MP_TABLE=1
+
+##
+## Build code to provide ACPI support
+##
+default CONFIG_GENERATE_ACPI_TABLES=1
+default CONFIG_HAVE_MAINBOARD_RESOURCES=1
+default CONFIG_HAVE_ACPI_RESUME=1
+
+##
+## Build code to export a CMOS option table
+##
+default CONFIG_HAVE_OPTION_TABLE=1
+
+##
+## Move the default CONFIG_coreboot cmos range off of AMD RTC registers
+##
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=0
+default CONFIG_PCI_ROM_RUN=0
+#default CONFIG_PCI_OPTION_ROM_RUN_REALMODE=1
+#default CONFIG_PCI_OPTION_ROM_RUN_YABEL=0
+# This is needed for Intel's IGD design:
+#default CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES=1
+#default CONFIG_DEBUG=0
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=4
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_LOGICAL_CPUS=1
+default CONFIG_AP_IN_SIPI_WAIT=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_SIZE=0x8000
+default CONFIG_DCACHE_RAM_BASE=( 0xfff00000 - CONFIG_DCACHE_RAM_SIZE - 1024*1024)
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+##
+## Execute In Place settings
+##
+
+default CONFIG_XIP_ROM_SIZE = 128 * 1024
+default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE - CONFIG_XIP_ROM_SIZE + CONFIG_ROM_IMAGE_SIZE )
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default CONFIG_MAINBOARD_PART_NUMBER="RK886EX"
+default CONFIG_MAINBOARD_VENDOR= "RODA"
+
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x4352
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6886
+
+###
+### coreboot layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 32K stack
+##
+default CONFIG_STACK_SIZE=0x8000
+
+##
+## Use a small 32K heap
+##
+default CONFIG_HEAP_SIZE=0x8000
+
+
+###
+### Compute the location and size of where this firmware image
+### (coreboot plus bootloader) will live in the boot rom chip.
+###
+default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
+
+##
+## coreboot C code runs at this location in RAM
+##
+default CONFIG_RAMBASE=0x00100000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD=1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=1
+
+##
+## USB debug console
+##
+
+default CONFIG_USBDEBUG_DIRECT=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
+
+# Select the serial console base port
+default CONFIG_TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default CONFIG_TTYS0_LCS=0x3
+
+##
+### Select the coreboot loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
+
+##
+## Select power on after power fail setting
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
Added: trunk/src/mainboard/roda/rk886ex/acpi/battery.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/battery.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/battery.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,339 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Name(\CBA1, 0x60)
+Name(\CBA2, 0x60)
+
+Device (BAT1)
+{
+ Name(_HID, EisaId("PNP0C0A"))
+ Name(_UID, 1)
+
+ Name(_PCL, Package(){ _SB })
+ Name(PSTA, 0x1f)
+ Name(PBIF, Package() {
+ 0x00,
+ 0x78,
+ 0x64,
+ 0x01,
+ 0x2b5c, // Capacity?
+ 0x05,
+ 0x03,
+ 0x01,
+ 0x01,
+ "???", // Name
+ "???", // Number
+ "???", // Type
+ "???" // Vendor
+ })
+ Name(PBST, Package() { 0x01, 0x16, 0x64, 0x2b5c })
+
+ /* Status */
+ Method(_STA, 0)
+ {
+ If(\_SB.PCI0.LPCB.EC0.ECON) {
+ If(\_SB.PCI0.LPCB.EC0.P62S) {
+ Return(0x0f)
+ } Else {
+ Return(0x1f)
+ }
+ } Else {
+ Return(0x0f)
+ }
+ }
+
+ /* Battery Info */
+ Method(_BIF, 0)
+ {
+ If(\_SB.PCI0.LPCB.EC0.ECON) {
+ If(\_SB.PCI0.LPCB.EC0.P62S) {
+ IVBI()
+ IVBS()
+ } Else {
+ UPBI()
+ }
+ }
+
+ Return(PBIF)
+ }
+
+ /* Battery Status */
+ Method(_BST, 0)
+ {
+ If(\_SB.PCI0.LPCB.EC0.ECON) {
+ UPBS()
+ }
+
+ Return(PBST)
+ }
+
+ /* Update Battery Info */
+ Method(UPBI, 0)
+ {
+ Store (0x78, Index(PBIF, 1))
+ Store (0x64, Index(PBIF, 2))
+ Store (0x2b5c, Index(PBIF, 4))
+ Store ("Bat1", Index(PBIF, 9))
+ Store ("001", Index(PBIF, 10))
+ Store ("LION", Index(PBIF, 11))
+ Store ("Panasonic", Index(PBIF, 12))
+ }
+
+ Method(UPBS, 0)
+ {
+ Store(\_SB.PCI0.LPCB.EC0.QEVT, Local0)
+ If (Not(Local0)) {
+ Store(0, GP38)
+ Sleep(0x64)
+ Store(GP38, Local0)
+ If (Not(Local0)) {
+ Store (RDW(0x0d), Local0)
+ If (LNotEqual(Local0, 0xeeee)) {
+ If (LLessEqual(Local0, 0x64)) {
+ Store(Local0, CBA1)
+ }
+ }
+ }
+ }
+
+ Store (CBA1, Local0)
+ Store (Local0, Index(PBST, 2))
+ Store (DerefOf(Index(PBIF, 4)), Index(PBST, 3))
+ Store (0, Local1)
+
+ If (PWRS) {
+ If (LLess(Local0, 0x64)) {
+ Store (2, Local1)
+ }
+ } Else {
+ If (LLessEqual(Local0, 0x5)) {
+ Store (4, Local1)
+ } Else {
+ Store (1, Local1)
+ }
+ }
+
+ Store (Local1, Index(PBST, 0))
+ If (\_SB.PCI0.LPCB.EC0.P63S) {
+ Store (0x16, Index(PBST, 1))
+ } Else {
+ Store (0x0b, Index(PBST, 1))
+ }
+ }
+
+ // Invalidate Battery Info
+ Method(IVBI, 0)
+ {
+ Store (0xffffffff, Index(PBIF, 1))
+ Store (0xffffffff, Index(PBIF, 2))
+ Store (0xffffffff, Index(PBIF, 4))
+ Store ("Bad", Index(PBIF, 9))
+ Store ("Bad", Index(PBIF, 10))
+ Store ("Bad", Index(PBIF, 11))
+ Store ("Bad", Index(PBIF, 12))
+ Store (1, PBIF)
+ }
+
+ Method(IVBS, 0)
+ {
+ Store (0x0, Index(PBST, 0))
+ Store (0xffffffff, Index(PBST, 1))
+ Store (0xffffffff, Index(PBST, 2))
+ Store (0xffffffff, Index(PBST, 3))
+ }
+}
+
+
+Device (BAT2)
+{
+ Name(_HID, EisaId("PNP0C0A"))
+ Name(_UID, 2)
+
+ Name(_PCL, Package(){ _SB })
+ Name(PSTA, 0x1f)
+ Name(PBIF, Package() {
+ 0x00,
+ 0x78,
+ 0x64,
+ 0x01,
+ 0x2b5c, // Capacity?
+ 0x05,
+ 0x03,
+ 0x01,
+ 0x01,
+ "???", // Name
+ "???", // Number
+ "???", // Type
+ "???" // Vendor
+ })
+ Name(PBST, Package() { 0x01, 0x16, 0x64, 0x2b5c })
+
+ /* Status */
+ Method(_STA, 0)
+ {
+ If(\_SB.PCI0.LPCB.EC0.ECON) {
+ If(\_SB.PCI0.LPCB.EC0.P63S) {
+ Return(0x0f)
+ } Else {
+ Return(0x1f)
+ }
+ } Else {
+ Return(0x0f)
+ }
+ }
+
+ /* Battery Info */
+ Method(_BIF, 0)
+ {
+ If(\_SB.PCI0.LPCB.EC0.ECON) {
+ If(\_SB.PCI0.LPCB.EC0.P63S) {
+ IVBI()
+ IVBS()
+ } Else {
+ UPBI()
+ }
+ }
+
+ Return(PBIF)
+ }
+
+ /* Battery Status */
+ Method(_BST, 0)
+ {
+ If(\_SB.PCI0.LPCB.EC0.ECON) {
+ UPBS()
+ }
+
+ Return(PBST)
+ }
+
+ /* Update Battery Info */
+ Method(UPBI, 0)
+ {
+ Store (0x78, Index(PBIF, 1))
+ Store (0x64, Index(PBIF, 2))
+ Store (0x2b5c, Index(PBIF, 4))
+ Store ("Bat2", Index(PBIF, 9))
+ Store ("002", Index(PBIF, 10))
+ Store ("LION", Index(PBIF, 11))
+ Store ("Panasonic", Index(PBIF, 12))
+ }
+
+ Method(UPBS, 0)
+ {
+ Store(\_SB.PCI0.LPCB.EC0.QEVT, Local0)
+ If (Not(Local0)) {
+ Store(0, GP38)
+ Sleep(0x64)
+ Store(GP38, Local0)
+ If (Not(Local0)) {
+ Store (RDW(0x0d), Local0)
+ If (LNotEqual(Local0, 0xeeee)) {
+ If (LLessEqual(Local0, 0x64)) {
+ Store(Local0, CBA2)
+ }
+ }
+ }
+ }
+
+ Store (CBA2, Local0)
+ Store (Local0, Index(PBST, 2))
+ Store (DerefOf(Index(PBIF, 4)), Index(PBST, 3))
+ Store (0, Local1)
+
+ If (PWRS) {
+ If (LLess(Local0, 0x64)) {
+ Store (2, Local1)
+ }
+ } Else {
+ If (LLessEqual(Local0, 0x5)) {
+ Store (4, Local1)
+ } Else {
+ Store (1, Local1)
+ }
+ }
+
+ Store (Local1, Index(PBST, 0))
+ If (\_SB.PCI0.LPCB.EC0.P62S) {
+ Store (0x16, Index(PBST, 1))
+ } Else {
+ Store (0x0b, Index(PBST, 1))
+ }
+ }
+
+ // Invalidate Battery Info
+ Method(IVBI, 0)
+ {
+ Store (0xffffffff, Index(PBIF, 1))
+ Store (0xffffffff, Index(PBIF, 2))
+ Store (0xffffffff, Index(PBIF, 4))
+ Store ("Bad", Index(PBIF, 9))
+ Store ("Bad", Index(PBIF, 10))
+ Store ("Bad", Index(PBIF, 11))
+ Store ("Bad", Index(PBIF, 12))
+ Store (1, PBIF)
+ }
+
+ Method(IVBS, 0)
+ {
+ Store (0x0, Index(PBST, 0))
+ Store (0xffffffff, Index(PBST, 1))
+ Store (0xffffffff, Index(PBST, 2))
+ Store (0xffffffff, Index(PBST, 3))
+ }
+}
+
+Method (RDW, 1)
+{
+ Store (0x16, \_SB.PCI0.LPCB.EC0.SMAD)
+ Store (Arg0, \_SB.PCI0.LPCB.EC0.SMCM)
+ Store (0x09, \_SB.PCI0.LPCB.EC0.SMPR)
+ While (LNotEqual(\_SB.PCI0.LPCB.EC0.SMPR, 0x00)) {
+ Stall (1)
+ }
+
+ Return (\_SB.PCI0.LPCB.EC0.SMW0)
+}
+
+Device (ADP1)
+{
+ Name (_HID, "ACPI0003")
+ Method (_PSR, 0)
+ {
+ If (\_SB.PCI0.LPCB.EC0.ECON) {
+ Store (\_SB.PCI0.LPCB.EC0.P60S, Local0)
+ If (Local0) {
+ Store (0, PWRS)
+ } Else {
+ Store (1, PWRS)
+ }
+ }
+
+ Stall (0x02)
+ Return (PWRS)
+ }
+
+ Method (_PCL, 0)
+ {
+ Return (_SB)
+ }
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi/ec.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/ec.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/ec.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,173 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device(EC0)
+{
+ Name (_HID, EISAID("PNP0C09"))
+ Name (_UID, 1)
+
+ Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI
+ Name (ECON, 0)
+ Name (QEVT, 0)
+
+ OperationRegion(ERAM, EmbeddedControl, 0x00, 0xff)
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x04), // Command interface
+ CMCM, 8,
+ CMD1, 8,
+ CMD2, 8,
+ CMD3, 8,
+ Offset(0x18), // SMBus
+ SMPR, 8,
+ SMST, 8,
+ SMAD, 8,
+ SMCM, 8,
+ Offset(0x1c),
+ SMW0, 16,
+ //SMD0, 264,
+ Offset(0x3d),
+ SMAA, 8,
+ Offset(0x78), // GPIs
+ P60S, 1,
+ P61S, 1,
+ P62S, 1,
+ P63S, 1,
+ P64S, 1,
+ P65S, 1,
+ P66S, 1,
+ P67S, 1,
+ Offset(0x83), // Thermal
+ RTMP, 8,
+ TML0, 8,
+ TMH0, 8,
+ Offset(0x87),
+ TMCR, 8,
+ Offset(0x89),
+ TML1, 8,
+ TMH1, 8
+ }
+
+ Method (_CRS, 0)
+ {
+ Name (ECMD, ResourceTemplate()
+ {
+ IO (Decode16, 0x62, 0x62, 1, 1)
+ IO (Decode16, 0x66, 0x66, 1, 1)
+ })
+
+ Return (ECMD)
+ }
+
+ Method (_REG, 2)
+ {
+ // This method is needed by Windows XP/2000 for
+ // EC initialization before a driver is loaded
+
+ If (LEqual(Arg0, 0x03)) {
+ Store (Arg1, ECON)
+ }
+ }
+
+ // EC Query methods
+
+ Method (_Q11, 0)
+ {
+ Store("_Q11: Fn-F8 (Sleep Button) pressed", Debug)
+ Notify(SLPB, 0x80)
+ }
+
+ Method (_Q12, 0)
+ {
+ Store("_Q12: Fn-F9 (Display Switch) pressed", Debug)
+ // Store(1, TLST)
+ // HKDS(10)
+ }
+
+ Method (_Q30, 0)
+ {
+ Store("_Q30: AC In/Out", Debug)
+ Notify(ADP1, 0x80) // Tell the Power Adapter
+ PNOT() // and the CPU and Battery
+ }
+
+ Method (_Q31, 0)
+ {
+ Store("_Q31: LID Open/Close", Debug)
+ Notify(LID0, 0x80)
+ }
+
+ Method (_Q32, 0)
+ {
+ Store("_Q32: Battery 1 In/Out", Debug)
+ If (ECON) {
+ Store (P62S, Local0)
+ If (Not(Local0)) {
+ Notify(BAT1, 0x80)
+ }
+ }
+ }
+
+ Method (_Q33, 0)
+ {
+ Store("_Q33: Battery 2 In/Out", Debug)
+ If (ECON) {
+ Store (P63S, Local0)
+ If (Not(Local0)) {
+ Notify(BAT2, 0x80)
+ }
+ }
+ }
+
+ Method (_Q34, 0)
+ {
+ Store("_Q34: LPT/FDD", Debug)
+ // PHSS(0x70)
+ }
+
+ Method (_Q35, 0)
+ {
+ Store("_Q35: Processor is hot", Debug)
+ }
+
+ Method (_Q36, 0)
+ {
+ Store("_Q36: Thermal Warning", Debug)
+ }
+
+ Method (_Q37, 0)
+ {
+ Store("_Q37: PME", Debug)
+ }
+
+ Method (_Q38, 0)
+ {
+ Store("_Q38: Thermal", Debug)
+ }
+
+ Method (_Q39, 0)
+ {
+ Store("_Q39: Thermal", Debug)
+ }
+
+ // TODO Scope _SB devices for AC power, LID, Power button
+
+}
Added: trunk/src/mainboard/roda/rk886ex/acpi/gpe.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/gpe.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/gpe.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,117 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Scope (_GPE)
+{
+ /* The event numbers correspond to the bit numbers in the
+ * GPE0_EN register PMBASE + 0x2C.
+ */
+
+ // Thermal Event
+ Method (_L00, 0)
+ {
+
+ }
+
+ // Hot Plug
+ Method (_L01, 0)
+ {
+
+ }
+
+ // Software GPE
+ Method (_L02, 0)
+ {
+
+ }
+
+ // USB1
+ Method (_L03, 0)
+ {
+
+ }
+
+ // USB2
+ Method (_L04, 0)
+ {
+
+ }
+
+ // AC97
+ Method (_L05, 0)
+ {
+
+ }
+
+ // _L06 TCOSCI
+
+ // SMBus (Reserved!)
+ Method (_L07, 0)
+ {
+
+ }
+
+ // COM1/COM2 (RI)
+ Method (_L08, 0)
+ {
+
+ }
+
+ // PCIe
+ Method (_L09, 0)
+ {
+
+ }
+
+ // _L0A BatLow / Quick Resume
+
+ // PME
+ Method (_L0B, 0)
+ {
+
+ }
+
+ // USB3
+ Method (_L0C, 0)
+ {
+
+ }
+
+ // PME B0
+ Method (_L0D, 0)
+ {
+
+ }
+
+ // USB4
+ Method (_L0E, 0)
+ {
+
+ }
+
+ // _L10 - _L1f: GPIn
+
+ // GPI13
+ Method (_L1D, 0)
+ {
+
+ }
+}
Added: trunk/src/mainboard/roda/rk886ex/acpi/i945_pci_irqs.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/i945_pci_irqs.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/i945_pci_irqs.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,85 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* This is board specific information: IRQ routing for the
+ * i945
+ */
+
+
+// PCI Interrupt Routing
+Method(_PRT)
+{
+ If (PICM) {
+ Return (Package() {
+ // PCIe Graphics 0:1.0
+ Package() { 0x0001ffff, 0, 0, 16 },
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, 0, 16 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, 0, 22 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, 0, 17 },
+ Package() { 0x001cffff, 1, 0, 16 },
+ Package() { 0x001cffff, 2, 0, 18 },
+ Package() { 0x001cffff, 3, 0, 19 },
+ // USB and EHCI 0:1d.x
+ Package() { 0x001dffff, 0, 0, 23 },
+ Package() { 0x001dffff, 1, 0, 19 },
+ Package() { 0x001dffff, 2, 0, 18 },
+ Package() { 0x001dffff, 3, 0, 16 },
+ // AC97 0:1e.2, 0:1e.3
+ Package() { 0x001effff, 0, 0, 22 },
+ Package() { 0x001effff, 1, 0, 20 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, 0, 18 },
+ Package() { 0x001fffff, 1, 0, 19 },
+ Package() { 0x001fffff, 1, 0, 20 },
+ Package() { 0x001fffff, 3, 0, 16 }
+ })
+ } Else {
+ Return (Package() {
+ // PCIe Graphics 0:1.0
+ Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
+ // USB and EHCI 0:1d.x
+ Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
+ Package() { 0x001dffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x001dffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001dffff, 3, \_SB.PCI0.LPCB.LNKA, 0 },
+ // AC97 0:1e.2, 0:1e.3
+ Package() { 0x001effff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ Package() { 0x001effff, 1, \_SB.PCI0.LPCB.LNKE, 0 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }
+ })
+ }
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi/ich7_pci_irqs.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/ich7_pci_irqs.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/ich7_pci_irqs.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,91 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* This is board specific information: IRQ routing for the
+ * 0:1e.0 PCI bridge of the ICH7
+ */
+
+If (PICM) {
+ Return (Package() {
+ // PCI Slot 1 routes ????
+ Package() { 0x0000ffff, 0, 0, 21},
+ Package() { 0x0000ffff, 1, 0, 22},
+ Package() { 0x0000ffff, 2, 0, 23},
+ Package() { 0x0000ffff, 3, 0, 20},
+
+ // PCI Slot 2 routes ????
+ Package() { 0x0001ffff, 0, 0, 22},
+ Package() { 0x0001ffff, 1, 0, 21},
+ Package() { 0x0001ffff, 2, 0, 20},
+ Package() { 0x0001ffff, 3, 0, 23},
+
+ // PCI Slot 3 routes ????
+ Package() { 0x0002ffff, 0, 0, 18},
+ Package() { 0x0002ffff, 1, 0, 19},
+ Package() { 0x0002ffff, 2, 0, 17},
+ Package() { 0x0002ffff, 3, 0, 16},
+
+ Package() { 0x0003ffff, 0, 0, 16},
+ Package() { 0x0003ffff, 1, 0, 17},
+ Package() { 0x0003ffff, 2, 0, 18},
+ Package() { 0x0003ffff, 3, 0, 19},
+
+ Package() { 0x0005ffff, 0, 0, 17},
+ Package() { 0x0005ffff, 1, 0, 20},
+ Package() { 0x0005ffff, 2, 0, 22},
+ Package() { 0x0005ffff, 3, 0, 21},
+
+ Package() { 0x0008ffff, 0, 0, 20},
+ })
+} Else {
+ Return (Package() {
+ // PCI Slot 1 routes FGHE
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKF, 0},
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKG, 0},
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKH, 0},
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKE, 0},
+
+ // PCI Slot 2 routes GFEH
+ Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKG, 0},
+ Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0},
+ Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKE, 0},
+ Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0},
+
+ // PCI Slot 3 routes CDBA
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKC, 0},
+ Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKD, 0},
+ Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKB, 0},
+ Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKA, 0},
+
+ Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0},
+ Package() { 0x0003ffff, 1, \_SB.PCI0.LPCB.LNKB, 0},
+ Package() { 0x0003ffff, 2, \_SB.PCI0.LPCB.LNKC, 0},
+ Package() { 0x0003ffff, 3, \_SB.PCI0.LPCB.LNKD, 0},
+
+ Package() { 0x0005ffff, 0, \_SB.PCI0.LPCB.LNKB, 0},
+ Package() { 0x0005ffff, 1, \_SB.PCI0.LPCB.LNKE, 0},
+ Package() { 0x0005ffff, 2, \_SB.PCI0.LPCB.LNKG, 0},
+ Package() { 0x0005ffff, 3, \_SB.PCI0.LPCB.LNKF, 0},
+
+ Package() { 0x0008ffff, 0, \_SB.PCI0.LPCB.LNKE, 0},
+ })
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi/mainboard.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/mainboard.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/mainboard.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (LID0)
+{
+ Name(_HID, EisaId("PNP0C0D"))
+ Method(_LID, 0)
+ {
+ Return (1)
+ }
+}
+
+Device (SLPB)
+{
+ Name(_HID, EisaId("PNP0C0E"))
+}
+
+Device (PWRB)
+{
+ Name(_HID, EisaId("PNP0C0C"))
+
+ // Wake
+ Name(_PRW, Package(){0x1d, 0x04})
+}
+
+#include "acpi/battery.asl"
Added: trunk/src/mainboard/roda/rk886ex/acpi/platform.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/platform.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/platform.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,206 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* These come from the dynamically created CPU SSDT */
+External(PDC0)
+External(PDC1)
+
+/* The APM port can be used for generating software SMIs */
+
+OperationRegion (APMP, SystemIO, 0xb2, 2)
+Field (APMP, ByteAcc, NoLock, Preserve)
+{
+ APMC, 8, // APM command
+ APMS, 8 // APM status
+}
+
+/* Port 80 POST */
+
+OperationRegion (POST, SystemIO, 0x80, 1)
+Field (POST, ByteAcc, Lock, Preserve)
+{
+ DBG0, 8
+}
+
+/* SMI I/O Trap */
+Method(TRAP, 1, Serialized)
+{
+ Store (Arg0, SMIF) // SMI Function
+ Store (0, TRP0) // Generate trap
+ Return (SMIF) // Return value of SMI handler
+}
+
+/* The _PIC method is called by the OS to choose between interrupt
+ * routing via the i8259 interrupt controller or the APIC.
+ *
+ * _PIC is called with a parameter of 0 for i8259 configuration and
+ * with a parameter of 1 for Local Apic/IOAPIC configuration.
+ */
+
+Method(_PIC, 1)
+{
+ // Remember the OS' IRQ routing choice.
+ Store(Arg0, PICM)
+}
+
+/* The _PTS method (Prepare To Sleep) is called before the OS is
+ * entering a sleep state. The sleep state number is passed in Arg0
+ */
+
+Method(_PTS,1)
+{
+ // Call a trap so SMI can prepare for Sleep as well.
+ // TRAP(0x55)
+}
+
+/* The _WAK method is called on system wakeup */
+
+Method(_WAK,1)
+{
+ // CPU specific part
+
+ // Notify PCI Express slots in case a card
+ // was inserted while a sleep state was active.
+
+ // Are we going to S3?
+ If (LEqual(Arg0, 3)) {
+ // ..
+ }
+
+ // Are we going to S4?
+ If (LEqual(Arg0, 4)) {
+ // ..
+ }
+
+ // TODO: Windows XP SP2 P-State restore
+
+ Return(Package(){0,0})
+}
+
+// Power notification
+
+External (\_PR_.CPU0, DeviceObj)
+External (\_PR_.CPU1, DeviceObj)
+
+Method (PNOT)
+{
+ If (MPEN) {
+ If(And(PDC0, 0x08)) {
+ Notify (\_PR_.CPU0, 0x80) // _PPC
+
+ If (And(PDC0, 0x10)) {
+ Sleep(100)
+ Notify(\_PR_.CPU0, 0x81) // _CST
+ }
+ }
+
+ If(And(PDC1, 0x08)) {
+ Notify (\_PR_.CPU1, 0x80) // _PPC
+ If (And(PDC1, 0x10)) {
+ Sleep(100)
+ Notify(\_PR_.CPU1, 0x81) // _CST
+ }
+ }
+
+ } Else { // UP
+ Notify (\_PR_.CPU0, 0x80)
+ Sleep(0x64)
+ Notify(\_PR_.CPU0, 0x81)
+ }
+
+ // Notify the Batteries
+ Notify(BAT1, 0x80) // Execute BAT1 _BST
+ Notify(BAT2, 0x80) // Execute BAT2 _BST
+}
+
+/* System Bus */
+
+Scope(\_SB)
+{
+ /* This method is placed on the top level, so we can make sure it's the
+ * first executed _INI method.
+ */
+ Method(_INI, 0)
+ {
+ /* The DTS data in NVS is probably not up to date.
+ * Update temperature values and make sure AP thermal
+ * interrupts can happen
+ */
+
+ // TRAP(71) // TODO
+
+ /* Determine the Operating System and save the value in OSYS.
+ * We have to do this in order to be able to work around
+ * certain windows bugs.
+ *
+ * OSYS value | Operating System
+ * -----------+------------------
+ * 2000 | Windows 2000
+ * 2001 | Windows XP(+SP1)
+ * 2002 | Windows XP SP2
+ * 2006 | Windows Vista
+ * ???? | Windows 7
+ */
+
+ /* Let's assume we're running at least Windows 2000 */
+ Store (2000, OSYS)
+
+ If (CondRefOf(_OSI, Local0)) {
+ /* Linux answers _OSI with "True" for a couple of
+ * Windows version queries. But unlike Windows it
+ * needs a Video repost, so let's determine whether
+ * we're running Linux.
+ */
+
+ If (_OSI("Linux")) {
+ Store (1, LINX)
+ }
+
+ If (_OSI("Windows 2001")) {
+ Store (2001, OSYS)
+ }
+
+ If (_OSI("Windows 2001 SP1")) {
+ Store (2001, OSYS)
+ }
+
+ If (_OSI("Windows 2001 SP2")) {
+ Store (2002, OSYS)
+ }
+
+ If (_OSI("Windows 2006")) {
+ Store (2006, OSYS)
+ }
+ }
+
+ /* And the OS workarounds start right after we know what we're
+ * running: Windows XP SP1 needs to have C-State coordination
+ * enabled in SMM.
+ */
+ If (LAnd(LEqual(OSYS, 2001), MPEN)) {
+ // TRAP(61) // TODO
+ }
+
+ /* SMM power state and C4-on-C3 settings need to be updated */
+ // TRAP(43) // TODO
+ }
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi/superio.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/superio.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/superio.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,379 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* SMSC LPC47N227 */
+
+Device (SIO1)
+{
+ Name (_HID, EISAID("PNP0A05"))
+ Name (_UID, 1)
+
+ OperationRegion(SIOR, SystemIO, 0x2e, 0x02)
+ Field (SIOR, ByteAcc, Nolock, Preserve)
+ {
+ INDX, 8,
+ DATA, 8
+ }
+
+ Mutex (SIOM, 0x00)
+
+ Method (READ, 3)
+ {
+ Acquire (SIOM, 0xffff)
+ If (LEqual(Arg0, 0)) {
+ Store (0x55, INDX)
+ Store (Arg1, INDX)
+ Store (DATA, Local1)
+ Store (0xaa, INDX)
+ }
+ And (Local1, Arg2, Local1)
+ Release(SIOM)
+ Return(Local1)
+ }
+
+ Method (WRIT, 3)
+ {
+ Acquire (SIOM, 0xffff)
+ If (LEqual(Arg0, 0)) {
+ Store (0x55, INDX)
+ Store (Arg1, INDX)
+ Store (Arg2, DATA)
+ Store (0xaa, INDX)
+ }
+ Release(SIOM)
+ }
+
+ Device (COMA)
+ {
+ Name(_HID, EISAID("PNP0501"))
+ Name(_UID, 1)
+ Name(_PRW, Package() { 0x08, 0x03 })
+
+ /* Device Status */
+ Method (_STA, 0)
+ {
+ // Device disabled by coreboot?
+ If (LEqual(CMAP, 0)) {
+ Return (0)
+ }
+
+ // Is the hardware enabled?
+ Store (READ(0, 0x24, 0xff), Local0)
+ If (LEqual(Local0, 0)) {
+ Return (0xd)
+ } Else {
+ // Power Enabled?
+ Store (READ(0, 0x02, 0x08), Local0)
+ If (LEqual(Local0, 0)) {
+ Return (0x0d)
+ } Else {
+ Return (0x0f)
+ }
+ }
+ }
+
+ /* Device Disable */
+ Method (_DIS, 0)
+ {
+ WRIT(0, 0x24, 0x00)
+
+ Store(READ(0, 0x28, 0x0f), Local0)
+ WRIT(0, 0x28, Local0)
+
+ Store(READ(0, 0x02, 0xff), Local0)
+ Not(0x08, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x02, Local0)
+ }
+
+ /* Possible Resource Settings */
+ Name(_PRS, ResourceTemplate() {
+ StartDependentFn(0, 1) {
+ IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8)
+ IRQNoFlags() { 4 }
+ } EndDependentFn()
+ })
+
+ /* Current Resource Settings */
+ Method(_CRS, 0)
+ {
+ Name(NONE, ResourceTemplate() {
+ IO(Decode16, 0x000, 0x000, 0x0, 0x0)
+ IRQNoFlags() { }
+ })
+
+ Name(RSRC, ResourceTemplate() {
+ IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8, _IOA)
+ IRQNoFlags(_IRA) { 4 }
+ })
+
+ And (_STA(), 0x02, Local0)
+ If (LEqual(Local0, 0)) {
+ Return(NONE)
+ }
+
+ CreateByteField(RSRC,
+ \_SB.PCI0.LPCB.SIO1.COMA._CRS._IOA._MIN, IOLO)
+ CreateByteField(RSRC, 0x03, IOHI) // Why?
+ CreateByteField(RSRC,
+ \_SB.PCI0.LPCB.SIO1.COMA._CRS._IOA._MAX, IORL)
+ CreateByteField(RSRC, 0x05, IORH) // Why?
+ CreateByteField(RSRC,
+ \_SB.PCI0.LPCB.SIO1.COMA._CRS._IRA._INT, IRQL)
+
+ Store (READ(0, 0x24, 0xff), Local0)
+ And (Local0, 0xc0, Local1)
+ ShiftRight(Local1, 0x06, Local1)
+ ShiftLeft(Local0, 0x02, Local0)
+ Store(Local0, IOLO)
+ Store(Local1, IOHI)
+ Store(IOLO, IORL)
+ Store(IOHI, IORH)
+
+ /* Interrupt */
+ Store(READ(0, 0x28, 0xf0), Local0)
+ ShiftRight(Local0, 4, Local0)
+ ShiftLeft(1, Local0, IRQL)
+ Return(RSRC)
+ }
+
+ /* Set Resource Settings */
+ Method(_SRS, 1)
+ {
+ CreateByteField(Arg0, 0x02, IOLO)
+ CreateByteField(Arg0, 0x03, IOHI)
+ CreateByteField(Arg0, 0x09, IRQL)
+
+ WRIT(0, 0x24, 0)
+ FindSetRightBit(IRQL, Local0)
+ Decrement(Local0)
+ ShiftLeft(Local0, 4, Local0)
+
+ Store(READ(0, 0x28, 0x0f), Local1)
+ Or(Local0, Local1, Local0)
+ WRIT(0, 0x28, Local0)
+
+ Store(IOLO, Local0)
+ ShiftRight(Local0, 2, Local0)
+ And(Local0, 0xfe, Local0)
+
+ Store(IOHI, Local1)
+ ShiftLeft(Local1, 6, Local1)
+ Or (Local0, Local1, Local0)
+ WRIT(0, 0x24, Local0)
+
+ Store(READ(0, 0x02, 0xff), Local0)
+ Or(Local0, 0x08, Local0)
+ WRIT(0, 0x02, Local0)
+
+ Store(READ(0, 0x07, 0xff), Local0)
+ Not(0x40, Local1)
+ And (Local0, Local1, Local0)
+ WRIT(0, 0x07, Local0)
+ }
+
+
+ /* D0 state - Line drivers are on */
+ Method (_PS0, 0)
+ {
+ Store(READ(0, 0x02, 0xff), Local0)
+ Or(Local0, 0x08, Local0)
+ WRIT(0, 0x02, Local0)
+
+ Store (READ(0, 0x07, 0xff), Local0)
+ Not(0x40, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x07, Local0)
+ }
+
+ /* D3 State - Line drivers are off */
+ Method(_PS3, 0)
+ {
+ Store(READ(0, 0x02, 0xff), Local0)
+ Not(0x08, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x02, Local0)
+ }
+ }
+
+ Device (COMB)
+ {
+ Name(_HID, EISAID("PNP0501"))
+ Name(_UID, 2)
+ Name(_PRW, Package() { 0x08, 0x03 })
+
+ /* Device Status */
+ Method (_STA, 0)
+ {
+ // Device disabled by coreboot?
+ If (LEqual(CMBP, 0)) {
+ Return (0)
+ }
+
+ /* IRDA? */
+ Store(READ(0, 0x0c, 0x38), Local0)
+ If (LNotEqual(Local0, Zero)) {
+ Return (0)
+ }
+
+ // Is the hardware enabled?
+ Store (READ(0, 0x25, 0xff), Local0)
+ If (LEqual(Local0, 0)) {
+ Return (0xd)
+ } Else {
+ // Power Enabled?
+ Store (READ(0, 0x02, 0x80), Local0)
+ If (LEqual(Local0, 0)) {
+ Return (0x0d)
+ } Else {
+ Return (0x0f)
+ }
+ }
+ }
+
+ /* Device Disable */
+ Method (_DIS, 0)
+ {
+ WRIT(0, 0x25, 0x00)
+
+ Store(READ(0, 0x28, 0xf0), Local0)
+ WRIT(0, 0x28, Local0)
+
+ Store(READ(0, 0x02, 0xff), Local0)
+ Not(0x80, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x02, Local0)
+ }
+
+ /* Possible Resource Settings */
+ Name(_PRS, ResourceTemplate() {
+ StartDependentFn(0, 1) {
+ IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8)
+ IRQNoFlags() { 3 }
+ } EndDependentFn()
+ })
+
+ /* Current Resource Settings */
+ Method(_CRS, 0)
+ {
+ Name(NONE, ResourceTemplate() {
+ IO(Decode16, 0x000, 0x000, 0x0, 0x0)
+ IRQNoFlags() { }
+ })
+
+ Name(RSRC, ResourceTemplate() {
+ IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8, _IOB)
+ IRQNoFlags(_IRB) { 3 }
+ })
+
+ And (_STA(), 0x02, Local0)
+ If (LEqual(Local0, 0)) {
+ Return(NONE)
+ }
+
+ CreateByteField(RSRC,
+ \_SB.PCI0.LPCB.SIO1.COMB._CRS._IOB._MIN, IOLO)
+ CreateByteField(RSRC, 0x03, IOHI)
+ CreateByteField(RSRC,
+ \_SB.PCI0.LPCB.SIO1.COMB._CRS._IOB._MAX, IORL)
+ CreateByteField(RSRC, 0x05, IORH)
+ CreateByteField(RSRC,
+ \_SB.PCI0.LPCB.SIO1.COMB._CRS._IRB._INT, IRQL)
+
+ Store (READ(0, 0x25, 0xff), Local0)
+ And (Local0, 0xc0, Local1)
+ ShiftRight(Local1, 0x06, Local1)
+ ShiftLeft(Local0, 0x02, Local0)
+ Store(Local0, IOLO)
+ Store(Local1, IOHI)
+ Store(IOLO, IORL)
+ Store(IOHI, IORH)
+
+ /* Interrupt */
+ Store(READ(0, 0x28, 0x0f), Local0)
+ ShiftRight(Local0, 4, Local0)
+ ShiftLeft(1, Local0, IRQL)
+ Return(RSRC)
+ }
+
+ /* Set Resource Settings */
+ Method(_SRS, 1)
+ {
+ CreateByteField(Arg0, 0x02, IOLO)
+ CreateByteField(Arg0, 0x03, IOHI)
+ CreateByteField(Arg0, 0x09, IRQL)
+
+ WRIT(0, 0x25, 0)
+ FindSetRightBit(IRQL, Local0)
+ Decrement(Local0)
+
+ Store(READ(0, 0x28, 0xf0), Local1)
+ Or(Local0, Local1, Local0)
+ WRIT(0, 0x28, Local0)
+
+ Store(IOLO, Local0)
+ ShiftRight(Local0, 2, Local0)
+ And(Local0, 0xfe, Local0)
+
+ Store(IOHI, Local1)
+ ShiftLeft(Local1, 6, Local1)
+ Or (Local0, Local1, Local0)
+ WRIT(0, 0x25, Local0)
+
+ Store(READ(0, 0x0c, 0xff), Local0)
+ Not(0x38, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x0c, Local0)
+
+ Store(READ(0, 0x02, 0xff), Local0)
+ Or(Local0, 0x80, Local0)
+ WRIT(0, 0x02, Local0)
+
+ Store(READ(0, 0x07, 0xff), Local0)
+ Not(0x20, Local1)
+ And (Local0, Local1, Local0)
+ WRIT(0, 0x07, Local0)
+ }
+
+ /* D0 state - Line drivers are on */
+ Method (_PS0, 0)
+ {
+ Store(READ(0, 0x02, 0xff), Local0)
+ Or(Local0, 0x80, Local0)
+ WRIT(0, 0x02, Local0)
+
+ Store (READ(0, 0x07, 0xff), Local0)
+ Not(0x20, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x07, Local0)
+ }
+
+ /* D3 State - Line drivers are off */
+ Method(_PS3, 0)
+ {
+ Store(READ(0, 0x02, 0xff), Local0)
+ Not(0x80, Local1)
+ And(Local0, Local1, Local0)
+ WRIT(0, 0x02, Local0)
+ }
+ }
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi/thermal.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/thermal.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/thermal.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,96 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Thermal Zone
+
+Scope (\_TZ)
+{
+ ThermalZone (THRM)
+ {
+
+ // FIXME these could/should be read from the
+ // GNVS area, so they can be controlled by
+ // coreboot
+ Name(TC1V, 0x04)
+ Name(TC2V, 0x03)
+ Name(TSPV, 0x64)
+
+ // At which temperature should the OS start
+ // active cooling?
+ Method (_AC0, 0, Serialized)
+ {
+ Return (0xf5c) // Value for Rocky
+ }
+
+ // Method (_AC1, 0, Serialized)
+ // {
+ // Return (0xf5c)
+ // }
+
+ // Critical shutdown temperature
+ Method (_CRT, 0, Serialized)
+ {
+ Return (Add (0x0aac, 0x50)) // FIXME
+ }
+
+ // CPU throttling start temperature
+ Method (_PSV, 0, Serialized)
+ {
+ Return (0xaaf) // FIXME
+ }
+
+ // Get DTS Temperature
+ Method (_TMP, 0, Serialized)
+ {
+ Return (0xaac) // FIXME
+ }
+
+ // Processors used for active cooling
+ Method (_PSL, 0, Serialized)
+ {
+ If (MPEN) {
+ Return (Package() {\_PR.CPU0, \_PR.CPU1})
+ }
+ Return (Package() {\_PR.CPU0})
+ }
+
+ // TC1 value for passive cooling
+ Method (_TC1, 0, Serialized)
+ {
+ Return (TC1V)
+ }
+
+ // TC2 value for passive cooling
+ Method (_TC2, 0, Serialized)
+ {
+ Return (TC2V)
+ }
+
+ // Sampling period for passive cooling
+ Method (_TSP, 0, Serialized)
+ {
+ Return (TSPV)
+ }
+
+
+ }
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi/video.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi/video.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi/video.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,45 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Brightness write
+Method (BRTW, 1, Serialized)
+{
+ // TODO
+}
+
+// Hot Key Display Switch
+Method (HKDS, 1, Serialized)
+{
+ // TODO
+}
+
+// Lid Switch Display Switch
+Method (LSDS, 1, Serialized)
+{
+ // TODO
+}
+
+// Brightness Notification
+Method(BRTN,1,Serialized)
+{
+ // TODO (no displays defined yet)
+}
+
Added: trunk/src/mainboard/roda/rk886ex/acpi_tables.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/acpi_tables.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/acpi_tables.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,373 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "dmi.h"
+
+extern unsigned char AmlCode[];
+#if CONFIG_HAVE_ACPI_SLIC
+unsigned long acpi_create_slic(unsigned long current);
+#endif
+void generate_cpu_entries(void); // from cpu/intel/speedstep
+unsigned long acpi_fill_mcfg(unsigned long current); // from northbridge/intel/i945
+
+#define OLD_ACPI 0
+#if OLD_ACPI
+void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ memset (gnvs, 0, sizeof(global_nvs_t));
+
+ gnvs->LIDS = 1;
+ gnvs->PWRS = 1;
+
+ gnvs->ACTT = 0x37;
+ gnvs->PSVT = 0x4f;
+
+ gnvs->TC1V = 0x00;
+ gnvs->TC2V = 0x0a;
+ gnvs->TSPV = 0x02;
+
+ gnvs->CRTT = 0x77;
+
+ gnvs->B0SC = 0x54;
+ gnvs->APIC = 0x01;
+ gnvs->MPEN = 0x01;
+
+ gnvs->PPCM = 0x02;
+ gnvs->PCP0 = 0xbf;
+ gnvs->PCP1 = 0xbf;
+
+ gnvs->CMAP = 0x01;
+ gnvs->CMBP = 0x01;
+ gnvs->LT0 = 0x01;
+ gnvs->FDCP = 0x01;
+ gnvs->CMCP = 0x01;
+ gnvs->CMDP = 0x01;
+ gnvs->P2M = 0x02;
+
+ gnvs->IGDS = 0x01;
+
+ gnvs->CADL = 0x09;
+ gnvs->PADL = 0x09;
+
+ gnvs->NDID = 3;
+ gnvs->DID1 = 0x80000100;
+ gnvs->DID2 = 0x80000240;
+ gnvs->DID3 = 0x80000410;
+ gnvs->DID4 = 0x80000410;
+ gnvs->DID5 = 0x00000005;
+
+ gnvs->ALAF = 0x64;
+ gnvs->LLOW = 0x2c;
+ gnvs->LHIH = 0x01;
+
+ // tolud = pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c);
+ // oemb->topm = tolud;
+}
+#endif
+
+#include "../../../southbridge/intel/i82801gx/i82801gx_nvs.h"
+void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ memset((void *)gnvs, 0, sizeof(*gnvs));
+ gnvs->apic = 1;
+ gnvs->mpen = 1; /* Enable Multi Processing */
+
+ /* Enable both COM ports */
+ gnvs->cmap = 0x01;
+ gnvs->cmbp = 0x01;
+
+ /* IGD Displays */
+ gnvs->ndid = 3;
+ gnvs->did[0] = 0x80000100;
+ gnvs->did[1] = 0x80000240;
+ gnvs->did[2] = 0x80000410;
+ gnvs->did[3] = 0x80000410;
+ gnvs->did[4] = 0x00000005;
+}
+
+void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+{
+#define HPET_ADDR 0xfed00000ULL
+ acpi_header_t *header = &(hpet->header);
+ acpi_addr_t *addr = &(hpet->addr);
+
+ memset((void *) hpet, 0, sizeof(acpi_hpet_t));
+
+ /* fill out header fields */
+ memcpy(header->signature, "HPET", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_hpet_t);
+ header->revision = 1;
+
+ /* fill out HPET address */
+ addr->space_id = 0; /* Memory */
+ addr->bit_width = 64;
+ addr->bit_offset = 0;
+ addr->addrl = HPET_ADDR & 0xffffffff;
+ addr->addrh = HPET_ADDR >> 32;
+
+ hpet->id = 0x8086a201; /* Intel */
+ hpet->number = 0x00;
+ hpet->min_tick = 0x0080;
+
+ header->checksum =
+ acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
+}
+
+
+
+#define IO_APIC_ADDR 0xfec00000UL
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* Local APICs */
+ current = acpi_create_madt_lapics(current);
+
+ /* IOAPIC */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ 2, IO_APIC_ADDR, 0);
+
+ /* LAPIC_NMI */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+ current, 0,
+ MP_IRQ_POLARITY_HIGH |
+ MP_IRQ_TRIGGER_EDGE, 0x01);
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+ current, 1, MP_IRQ_POLARITY_HIGH |
+ MP_IRQ_TRIGGER_EDGE, 0x01);
+
+ /* INT_SRC_OVR */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL);
+
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+ generate_cpu_entries();
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ // Not implemented
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ /* No NUMA, no SRAT */
+ return current;
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1);
+
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ int i;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_xsdt_t *xsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_mcfg_t *mcfg;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+#if CONFIG_HAVE_ACPI_SLIC
+ acpi_header_t *slic;
+#endif
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+ void *gnvs;
+
+ current = start;
+
+ /* Align ACPI tables to 16byte */
+ ALIGN_CURRENT;
+
+ printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ ALIGN_CURRENT;
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+ ALIGN_CURRENT;
+ xsdt = (acpi_xsdt_t *) current;
+ current += sizeof(acpi_xsdt_t);
+ ALIGN_CURRENT;
+
+ /* clear all table memory */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, xsdt);
+ acpi_write_rsdt(rsdt);
+ acpi_write_xsdt(xsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ printk_debug("ACPI: * HPET\n");
+
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ ALIGN_CURRENT;
+ acpi_create_intel_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ printk_debug("ACPI: * MADT\n");
+
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, madt);
+
+ printk_debug("ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, mcfg);
+
+ printk_debug("ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ ALIGN_CURRENT;
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void *) dsdt, (void *) AmlCode,
+ ((acpi_header_t *) AmlCode)->length);
+
+ /* Fix up global NVS region for SMI handler. The GNVS region lives
+ * in the (high) table area. The low memory map looks like this:
+ *
+ * 0x00000000 - 0x000003ff Real Mode IVT
+ * 0x00000020 - 0x0000019c Low MP Table (XXX conflict?)
+ * 0x00000400 - 0x000004ff BDA (somewhat unused)
+ * 0x00000500 - 0x0000052f Moved GDT
+ * 0x00000530 - 0x00000b64 coreboot table
+ * 0x0007c000 - 0x0007dfff OS boot sector (unused?)
+ * 0x0007e000 - 0x0007ffff free to use (so no good for acpi+smi)
+ * 0x00080000 - 0x0009fbff usable ram
+ * 0x0009fc00 - 0x0009ffff EBDA (unused?)
+ * 0x000a0000 - 0x000bffff VGA memory
+ * 0x000c0000 - 0x000cffff VGA option rom
+ * 0x000d0000 - 0x000dffff free for other option roms?
+ * 0x000e0000 - 0x000fffff SeaBIOS? (conflict with low tables:)
+ * 0x000f0000 - 0x000f03ff PIRQ table
+ * 0x000f0400 - 0x000f66?? ACPI tables
+ * 0x000f66?? - 0x000f???? DMI tables
+ */
+
+ ALIGN_CURRENT;
+
+ /* Pack GNVS into the ACPI table area */
+ for (i=0; i < dsdt->length; i++) {
+ if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) {
+ printk_debug("ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, (u32)current);
+ *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes
+ break;
+ }
+ }
+
+ /* And fill it */
+ acpi_create_gnvs((global_nvs_t *)current);
+
+ /* Keep pointer around */
+ gnvs = (void *)current;
+
+ current += 0x100;
+ ALIGN_CURRENT;
+
+ /* And tell SMI about it */
+ smm_setup_structures(gnvs, NULL, NULL);
+
+ /* We patched up the DSDT, so we need to recalculate the checksum */
+ dsdt->checksum = 0;
+ dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length);
+
+ printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt,
+ dsdt->length);
+
+#if CONFIG_HAVE_ACPI_SLIC
+ printk_debug("ACPI: * SLIC\n");
+ slic = (acpi_header_t *)current;
+ current += acpi_create_slic(current);
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, slic);
+#endif
+
+ printk_debug("ACPI: * FADT\n");
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+ ALIGN_CURRENT;
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ printk_debug("ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+ acpi_create_ssdt_generator(ssdt, "COREBOOT");
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+ ALIGN_CURRENT;
+
+ printk_debug("current = %lx\n", current);
+
+ printk_debug("ACPI: * DMI (Linux workaround)\n");
+ memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE);
+#if CONFIG_WRITE_HIGH_TABLES == 1
+ memcpy((void *)current, dmi_table, DMI_TABLE_SIZE);
+ current += DMI_TABLE_SIZE;
+ ALIGN_CURRENT;
+#endif
+
+ printk_info("ACPI: done.\n");
+
+ /* Enable Dummy DCC ON# for DVI */
+ printk_debug("Laptop handling...\n");
+ outb(inb(0x60f) & ~(1 << 5), 0x60f);
+
+ return current;
+}
Added: trunk/src/mainboard/roda/rk886ex/auto.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/auto.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/auto.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,403 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// __PRE_RAM__ means: use "unsigned" for device, not a struct.
+#define __PRE_RAM__
+
+/* Configuration of the i945 driver */
+#define CHIPSET_I945GM 1
+#define CHANNEL_XOR_RANDOMIZATION 1
+// Rocky freezing temperature settings:
+#define MAXIMUM_SUPPORTED_FREQUENCY 400
+
+#include <stdint.h>
+#include <string.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include <cpu/x86/bist.h>
+
+#if CONFIG_USBDEBUG_DIRECT
+#define DBGP_DEFAULT 1
+#include "southbridge/intel/i82801gx/i82801gx_usb_debug.c"
+#include "pc80/usbdebug_direct_serial.c"
+#endif
+
+#include "lib/ramtest.c"
+#include "southbridge/intel/i82801gx/i82801gx_early_smbus.c"
+
+#include "northbridge/intel/i945/udelay.c"
+
+#include "southbridge/intel/i82801gx/i82801gx.h"
+static void setup_ich7_gpios(void)
+{
+ printk_debug(" GPIOS...");
+ /* General Registers */
+ outl(0xbfc0f7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */
+ outl(0x70a87d83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */
+ outl(0x7dc07f83, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */
+ /* Output Control Registers */
+ outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */
+ /* Input Control Registers */
+ outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */
+ outl(0x000100e8, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */
+ outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */
+ outl(0x00010030, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */
+}
+
+#include "northbridge/intel/i945/early_init.c"
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/intel/i945/raminit.h"
+#include "northbridge/intel/i945/raminit.c"
+#include "northbridge/intel/i945/reset_test.c"
+#include "northbridge/intel/i945/errata.c"
+#include "northbridge/intel/i945/debug.c"
+
+static void ich7_enable_lpc(void)
+{
+ // Enable Serial IRQ
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
+ // decode range
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0007);
+ // decode range
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f);
+ // Enable 0x02e0
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x02e1);
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x001c);
+ // COM3 decode
+ pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x00fc0601);
+ // COM4 decode
+ pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x00040069);
+}
+
+
+/* This box has two superios, so enabling serial becomes slightly excessive.
+ * We disable a lot of stuff to make sure that there are no conflicts between
+ * the two. Also set up the GPIOs from the beginning. This is the "no schematic
+ * but safe anyways" method.
+ */
+static inline void pnp_enter_ext_func_mode(device_t dev)
+{
+ unsigned int port = dev >> 8;
+ outb(0x55, port);
+}
+
+static void pnp_exit_ext_func_mode(device_t dev)
+{
+ unsigned int port = dev >> 8;
+ outb(0xaa, port);
+}
+
+static void pnp_write_register(device_t dev, int reg, int val)
+{
+ unsigned int port = dev >> 8;
+ outb(reg, port);
+ outb(val, port+1);
+}
+
+static void early_superio_config(void)
+{
+ device_t dev;
+
+ dev=PNP_DEV(0x2e, 0x00);
+
+ pnp_enter_ext_func_mode(dev);
+ pnp_write_register(dev, 0x01, 0x94); // Extended Parport modes
+ pnp_write_register(dev, 0x02, 0x88); // UART power on
+ pnp_write_register(dev, 0x03, 0x72); // Floppy
+ pnp_write_register(dev, 0x04, 0x01); // EPP + SPP
+ pnp_write_register(dev, 0x14, 0x03); // Floppy
+ pnp_write_register(dev, 0x20, (0x3f0 >> 2)); // Floppy
+ pnp_write_register(dev, 0x23, (0x378 >> 2)); // PP base
+ pnp_write_register(dev, 0x24, (0x3f8 >> 2)); // UART1 base
+ pnp_write_register(dev, 0x25, (0x2f8 >> 2)); // UART2 base
+ pnp_write_register(dev, 0x26, (2 << 4) | 0); // FDC + PP DMA
+ pnp_write_register(dev, 0x27, (6 << 4) | 7); // FDC + PP DMA
+ pnp_write_register(dev, 0x28, (4 << 4) | 3); // UART1,2 IRQ
+ /* These are the SMI status registers in the SIO: */
+ pnp_write_register(dev, 0x30, (0x600 >> 4)); // Runtime Register Block Base
+
+ pnp_write_register(dev, 0x31, 0x00); // GPIO1 DIR
+ pnp_write_register(dev, 0x32, 0x00); // GPIO1 POL
+ pnp_write_register(dev, 0x33, 0x40); // GPIO2 DIR
+ pnp_write_register(dev, 0x34, 0x00); // GPIO2 POL
+ pnp_write_register(dev, 0x35, 0xff); // GPIO3 DIR
+ pnp_write_register(dev, 0x36, 0x00); // GPIO3 POL
+ pnp_write_register(dev, 0x37, 0xe0); // GPIO4 DIR
+ pnp_write_register(dev, 0x38, 0x00); // GPIO4 POL
+ pnp_write_register(dev, 0x39, 0x80); // GPIO4 POL
+
+ pnp_exit_ext_func_mode(dev);
+}
+
+static void rcba_config(void)
+{
+ /* Set up virtual channel 0 */
+ //RCBA32(0x0014) = 0x80000001;
+ //RCBA32(0x001c) = 0x03128010;
+
+ /* Device 1f interrupt pin register */
+ RCBA32(0x3100) = 0x00042220;
+ /* Device 1d interrupt pin register */
+ RCBA32(0x310c) = 0x00214321;
+
+ /* dev irq route register */
+ RCBA16(0x3140) = 0x0232;
+ RCBA16(0x3142) = 0x3246;
+ RCBA16(0x3144) = 0x0237;
+ RCBA16(0x3146) = 0x3201;
+ RCBA16(0x3148) = 0x3216;
+
+ /* Enable IOAPIC */
+ RCBA8(0x31ff) = 0x03;
+
+ /* Enable upper 128bytes of CMOS */
+ RCBA32(0x3400) = (1 << 2);
+
+ /* Disable unused devices */
+ RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_PCIE3 | FD_PCIE2 |
+ FD_INTLAN | FD_ACMOD | FD_HDAUD | FD_PATA;
+ RCBA32(0x3418) |= (1 << 0); // Required.
+
+ /* Enable PCIe Root Port Clock Gate */
+ // RCBA32(0x341c) = 0x00000001;
+
+ /* This should probably go into the ACPI OS Init trap */
+
+ /* Set up I/O Trap #0 for 0xfe00 (SMIC) */
+ RCBA32(0x1e84) = 0x00020001;
+ RCBA32(0x1e80) = 0x0000fe01;
+
+ /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */
+ RCBA32(0x1e9c) = 0x000200f0;
+ RCBA32(0x1e98) = 0x000c0801;
+}
+
+static void early_ich7_init(void)
+{
+ uint8_t reg8;
+ uint32_t reg32;
+
+ // program secondary mlt XXX byte?
+ pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
+
+ // reset rtc power status
+ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
+ reg8 &= ~(1 << 2);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
+
+ // usb transient disconnect
+ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
+ reg8 |= (3 << 0);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
+
+ reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
+ reg32 |= (1 << 29) | (1 << 17);
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);
+
+ reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
+ reg32 |= (1 << 31) | (1 << 27);
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);
+
+ RCBA32(0x0088) = 0x0011d000;
+ RCBA16(0x01fc) = 0x060f;
+ RCBA32(0x01f4) = 0x86000040;
+ RCBA32(0x0214) = 0x10030549;
+ RCBA32(0x0218) = 0x00020504;
+ RCBA8(0x0220) = 0xc5;
+ reg32 = RCBA32(0x3410);
+ reg32 |= (1 << 6);
+ RCBA32(0x3410) = reg32;
+ reg32 = RCBA32(0x3430);
+ reg32 &= ~(3 << 0);
+ reg32 |= (1 << 0);
+ RCBA32(0x3430) = reg32;
+ RCBA32(0x3418) |= (1 << 0);
+ RCBA16(0x0200) = 0x2008;
+ RCBA8(0x2027) = 0x0d;
+ RCBA16(0x3e08) |= (1 << 7);
+ RCBA16(0x3e48) |= (1 << 7);
+ RCBA32(0x3e0e) |= (1 << 7);
+ RCBA32(0x3e4e) |= (1 << 7);
+
+ // next step only on ich7m b0 and later:
+ reg32 = RCBA32(0x2034);
+ reg32 &= ~(0x0f << 16);
+ reg32 |= (5 << 16);
+ RCBA32(0x2034) = reg32;
+}
+
+#if CONFIG_USE_FALLBACK_IMAGE == 1
+#include "southbridge/intel/i82801gx/cmos_failover.c"
+#endif
+
+static void init_artec_dongle(void)
+{
+ // Enable 4MB decoding
+ outb(0xf1, 0x88);
+ outb(0xf4, 0x88);
+}
+
+#include <cbmem.h>
+
+// Now, this needs to be included because it relies on the symbol
+// __PRE_RAM__ being set during CAR stage (in order to compile the
+// BSS free versions of the functions). Either rewrite the code
+// to be always BSS free, or invent a flag that's better suited than
+// __PRE_RAM__ to determine whether we're in ram init stage (stage 1)
+//
+#include "lib/cbmem.c"
+
+void real_main(unsigned long bist)
+{
+ u32 reg32;
+ int boot_mode = 0;
+
+ if (bist == 0) {
+ enable_lapic();
+ }
+
+ ich7_enable_lpc();
+ early_superio_config();
+
+ /* Set up the console */
+ uart_init();
+
+#if CONFIG_USBDEBUG_DIRECT
+ i82801gx_enable_usbdebug_direct(DBGP_DEFAULT);
+ early_usbdebug_direct_init();
+#endif
+
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ if (MCHBAR16(SSKPD) == 0xCAFE) {
+ printk_debug("soft reset detected.\n");
+ boot_mode = 1;
+ }
+
+ /* Perform some early chipset initialization required
+ * before RAM initialization can work
+ */
+ i945_early_initialization();
+
+ /* This has to happen after i945_early_initialization() */
+ init_artec_dongle();
+
+ /* Read PM1_CNT */
+ reg32 = inl(DEFAULT_PMBASE + 0x04);
+ printk_debug("PM1_CNT: %08x\n", reg32);
+ if (((reg32 >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ printk_debug("Resume from S3 detected.\n");
+ boot_mode = 2;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
+
+#else
+ printk_debug("Resume from S3 detected, but disabled.\n");
+#endif
+ }
+
+ /* Enable SPD ROMs and DDR-II DRAM */
+ enable_smbus();
+
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
+ dump_spd_registers();
+#endif
+
+ sdram_initialize(boot_mode);
+
+ /* Perform some initialization that must run before stage2 */
+ early_ich7_init();
+
+ /* This should probably go away. Until now it is required
+ * and mainboard specific
+ */
+ rcba_config();
+
+ /* Chipset Errata! */
+ fixup_i945_errata();
+
+ /* Initialize the internal PCIe links before we go into stage2 */
+ i945_late_initialization();
+
+#if !CONFIG_HAVE_ACPI_RESUME
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
+#if defined(DEBUG_RAM_SETUP)
+ sdram_dump_mchbar_registers();
+
+ {
+ /* This will not work if TSEG is in place! */
+ u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c);
+
+ printk_debug("TOM: 0x%08x\n", tom);
+ ram_check(0x00000000, 0x000a0000);
+ ram_check(0x00100000, tom);
+ }
+#endif
+#endif
+#endif
+
+ MCHBAR16(SSKPD) = 0xCAFE;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* Start address of high memory tables */
+ unsigned long high_ram_base = get_top_of_ram() - HIGH_MEMORY_SIZE;
+
+ /* If there is no high memory area, we didn't boot before, so
+ * this is not a resume. In that case we just create the cbmem toc.
+ */
+ if ((boot_mode == 2) && cbmem_reinit((u64)high_ram_base)) {
+ void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
+
+ /* copy 1MB - 64K to high tables ram_base to prevent memory corruption
+ * through stage 2. We could keep stuff like stack and heap in high tables
+ * memory completely, but that's a wonderful clean up task for another
+ * day.
+ */
+ if (resume_backup_memory)
+ memcpy(resume_backup_memory, CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
+
+ /* Magic for S3 resume */
+ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
+ }
+#endif
+}
+
+#include "cpu/intel/model_6ex/cache_as_ram_disable.c"
Added: trunk/src/mainboard/roda/rk886ex/chip.h
===================================================================
--- trunk/src/mainboard/roda/rk886ex/chip.h (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/chip.h 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+struct mainboard_config {
+ int nothing;
+};
Added: trunk/src/mainboard/roda/rk886ex/cmos.layout
===================================================================
--- trunk/src/mainboard/roda/rk886ex/cmos.layout (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/cmos.layout 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,144 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2007-2008 coresystems GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+# -----------------------------------------------------------------
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+# -----------------------------------------------------------------
+# Status Register A
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+# -----------------------------------------------------------------
+# Status Register B
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+#390 2 r 0 unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392 3 e 5 baud_rate
+395 4 e 6 debug_level
+#399 1 r 0 unused
+
+# coreboot config options: cpu
+400 1 e 2 hyper_threading
+#401 7 r 0 unused
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+#409 2 e 7 power_on_after_fail
+#411 5 r 0 unused
+
+# coreboot config options: bootloader
+416 512 s 0 boot_devices
+#928 80 r 0 unused
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+#1000 24 r 0 amd_reserved
+
+# ram initialization internal data
+1024 8 r 0 C0WL0REOST
+1032 8 r 0 C1WL0REOST
+1040 8 r 0 RCVENMT
+1048 4 r 0 C0DRT1
+1052 4 r 0 C1DRT1
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 1 Emergency
+6 2 Alert
+6 3 Critical
+6 4 Error
+6 5 Warning
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Disable
+7 1 Enable
+7 2 Keep
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 983 984
+
+
Added: trunk/src/mainboard/roda/rk886ex/devicetree.cb
===================================================================
--- trunk/src/mainboard/roda/rk886ex/devicetree.cb (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/devicetree.cb 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,115 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2009 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+chip northbridge/intel/i945
+
+ device apic_cluster 0 on
+ chip cpu/intel/socket_mFCPGA478
+ device apic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ # auto detection:
+ #device pci 01.0 off end # i945 PCIe root port
+ #device pci 02.0 on end # vga controller
+ #device pci 02.1 on end # display controller
+
+ chip southbridge/intel/i82801gx
+ register "pirqa_routing" = "0x0b"
+ register "pirqb_routing" = "0x0b"
+ register "pirqc_routing" = "0x0b"
+ register "pirqd_routing" = "0x0b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x0b"
+ register "pirqh_routing" = "0x0b"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "gpi13_routing" = "2"
+ register "gpi8_routing" = "1"
+ register "gpi7_routing" = "2"
+ register "gpe0_en" = "0x20800007"
+
+ register "ide_legacy_combined" = "0x1"
+ register "ide_enable_primary" = "0x1"
+ register "ide_enable_secondary" = "0x0"
+ register "sata_ahci" = "0x0"
+
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe
+ device pci 1c.1 on end # PCIe
+ device pci 1c.2 on end # PCIe
+ #device pci 1c.3 off end # PCIe port 4
+ #device pci 1c.4 off end # PCIe port 5
+ #device pci 1c.5 off end # PCIe port 6
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.3 on end # USB UHCI
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1e.0 on
+ chip southbridge/ti/pci7420
+ register "smartcard_enabled" = "0x0"
+ device pci 3.0 on end
+ device pci 3.1 on end
+ device pci 3.2 on end
+ device pci 3.3 off end # smartcard
+ end
+ end # PCI bridge
+ #device pci 1e.2 off end # AC'97 Audio
+ #device pci 1e.3 off end # AC'97 Modem
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47n227
+ device pnp 2e.1 off # Parallel port
+ end
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 off # Keyboard+Mouse
+ # io 0x60 = 0x60
+ # io 0x62 = 0x64
+ # irq 0x70 = 1
+ # irq 0x72 = 12
+ end
+ end
+ chip superio/renesas/m3885x
+ device pnp ff.1 on # dummy address
+ end
+ end
+
+ end
+ #device pci 1f.1 off end # IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
+ #device pci 1f.4 off end # Realtek ID Codec
+ end
+ end
+end
Added: trunk/src/mainboard/roda/rk886ex/dmi.h
===================================================================
--- trunk/src/mainboard/roda/rk886ex/dmi.h (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/dmi.h 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#define DMI_TABLE_SIZE 0x55
+
+static u8 dmi_table[DMI_TABLE_SIZE] = {
+ 0x5f, 0x53, 0x4d, 0x5f, 0x29, 0x1f, 0x02, 0x03, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x5f, 0x44, 0x4d, 0x49, 0x5f, 0x61, 0x35, 0x00, 0xa0, 0xff, 0x0f, 0x00, 0x01, 0x00, 0x23, 0x00,
+ 0x00, 0x14, 0x00, 0x00, 0x01, 0x02, 0x00, 0xe0, 0x03, 0x07, 0x90, 0xde, 0xcb, 0x7f, 0x00, 0x00,
+ 0x00, 0x00, 0x37, 0x01, 0x63, 0x6f, 0x72, 0x65, 0x73, 0x79, 0x73, 0x74, 0x65, 0x6d, 0x73, 0x20,
+ 0x47, 0x6d, 0x62, 0x48, 0x00, 0x32, 0x2e, 0x30, 0x00, 0x30, 0x33, 0x2f, 0x31, 0x33, 0x2f, 0x32,
+ 0x30, 0x30, 0x38, 0x00, 0x00
+};
Added: trunk/src/mainboard/roda/rk886ex/dsdt.asl
===================================================================
--- trunk/src/mainboard/roda/rk886ex/dsdt.asl (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/dsdt.asl 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x03, // DSDT revision: ACPI v3.0
+ "COREv2", // OEM id
+ "COREBOOT", // OEM table id
+ 0x20090419 // OEM revision
+)
+{
+ // Some generic macros
+ #include "acpi/platform.asl"
+
+ // global NVS and variables
+ #include "../../../southbridge/intel/i82801gx/acpi/globalnvs.asl"
+
+ // General Purpose Events
+ #include "acpi/gpe.asl"
+
+ // mainboard specific devices
+ #include "acpi/mainboard.asl"
+
+ // Thermal Zone
+ #include "acpi/thermal.asl"
+
+ Scope (\_SB) {
+ Device (PCI0)
+ {
+ #include "../../../northbridge/intel/i945/acpi/i945.asl"
+ #include "../../../southbridge/intel/i82801gx/acpi/ich7.asl"
+ }
+ }
+
+ /* Chipset specific sleep states */
+ #include "../../../southbridge/intel/i82801gx/acpi/sleepstates.asl"
+}
Added: trunk/src/mainboard/roda/rk886ex/ec.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/ec.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/ec.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "ec.h"
+
+int send_ec_command(u8 command)
+{
+ int timeout;
+
+ timeout = 0x7ff;
+ while ((inb(EC_SC) & EC_IBF) && --timeout) {
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk_spew(".");
+ }
+ if (!timeout) {
+ printk_debug("Timeout while sending command 0x%02x to EC!\n",
+ command);
+ // return -1;
+ }
+
+ outb(command, EC_SC);
+ return 0;
+}
+
+int send_ec_data(u8 data)
+{
+ int timeout;
+
+ timeout = 0x7ff;
+ while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk_spew(".");
+ }
+ if (!timeout) {
+ printk_debug("Timeout while sending data 0x%02x to EC!\n",
+ data);
+ // return -1;
+ }
+
+ outb(data, EC_DATA);
+
+ return 0;
+}
+
+int send_ec_data_nowait(u8 data)
+{
+ outb(data, EC_DATA);
+
+ return 0;
+}
+
+u8 recv_ec_data(void)
+{
+ int timeout;
+ u8 data;
+
+ timeout = 0x7fff;
+ while (--timeout) { // Wait for OBF = 1
+ if (inb(EC_SC) & EC_OBF) {
+ break;
+ }
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk_spew(".");
+ }
+ if (!timeout) {
+ printk_debug("\nTimeout while receiving data from EC!\n");
+ // return -1;
+ }
+
+ data = inb(EC_DATA);
+ printk_debug("recv_ec_data: 0x%02x\n", data);
+
+ return data;
+}
+
+u8 ec_read(u8 addr)
+{
+ send_ec_command(0x80);
+ send_ec_data(addr);
+
+ return recv_ec_data();
+}
+
+int ec_write(u8 addr, u8 data)
+{
+ send_ec_command(0x81);
+ send_ec_data(addr);
+ return send_ec_data(data);
+}
+
Added: trunk/src/mainboard/roda/rk886ex/ec.h
===================================================================
--- trunk/src/mainboard/roda/rk886ex/ec.h (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/ec.h 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _MAINBOARD_EC_H
+#define _MAINBOARD_EC_H
+
+#define EC_DATA 0x62
+#define EC_SC 0x66
+
+/* EC_SC input */
+#define EC_SMI_EVT (1 << 6) // 1: SMI event pending
+#define EC_SCI_EVT (1 << 5) // 1: SCI event pending
+#define EC_BURST (1 << 4) // controller is in burst mode
+#define EC_CMD (1 << 3) // 1: byte in data register is command
+ // 0: byte in data register is data
+#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec)
+#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host)
+/* EC_SC output */
+#define RD_EC 0x80 // Read Embedded Controller
+#define WR_EC 0x81 // Write Embedded Controller
+#define BE_EC 0x82 // Burst Enable Embedded Controller
+#define BD_EC 0x83 // Burst Disable Embedded Controller
+#define QR_EC 0x84 // Query Embedded Controller
+
+int send_ec_command(u8 command);
+int send_ec_data(u8 data);
+int send_ec_data_nowait(u8 data);
+u8 recv_ec_data(void);
+u8 ec_read(u8 addr);
+int ec_write(u8 addr, u8 data);
+
+#endif
+
Added: trunk/src/mainboard/roda/rk886ex/fadt.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/fadt.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/fadt.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,164 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+
+/* FIXME: This needs to go into a separate .h file
+ * to be included by the ich7 smi handler, ich7 smi init
+ * code and the mainboard fadt.
+ */
+#define APM_CNT 0xb2
+#define CST_CONTROL 0x85
+#define PST_CONTROL 0x80
+#define ACPI_DISABLE 0x1e
+#define ACPI_ENABLE 0xe1
+#define GNVS_UPDATE 0xea
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe;
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = 3;
+ memcpy(header->oem_id, "CORE ", 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, "CORE", 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+ fadt->model = 0x00;
+ fadt->preferred_pm_profile = PM_MOBILE;
+ fadt->sci_int = 0x9;
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = ACPI_ENABLE;
+ fadt->acpi_disable = ACPI_DISABLE;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = PST_CONTROL;
+
+ fadt->pm1a_evt_blk = pmbase;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = pmbase + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = pmbase + 0x20;
+ fadt->pm_tmr_blk = pmbase + 0x8;
+ fadt->gpe0_blk = pmbase + 0x28;
+ fadt->gpe1_blk = 0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = CST_CONTROL;
+ fadt->p_lvl2_lat = 1;
+ fadt->p_lvl3_lat = 0x23;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 3;
+ fadt->day_alrm = 0xd;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x32;
+ fadt->iapc_boot_arch = 0x00;
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE |
+ ACPI_FADT_DOCKING_SUPPORTED;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pmbase;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 0;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 0;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 8;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = pmbase + 0x28;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 0;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, header->length);
+}
Added: trunk/src/mainboard/roda/rk886ex/irq_tables.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/irq_tables.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/irq_tables.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*18, /* There can be total 18 devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */
+ 0, /* IRQs devoted exclusively to PCI usage */
+ 0x8086, /* Vendor */
+ 0x27b0, /* Device */
+ 0, /* miniport */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0xf, /* u8 checksum. */
+ {
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+ {0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe?
+ {0x00,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA
+ {0x00,(0x1e<<3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge
+ {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC
+ {0x00,(0x1d<<3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1
+ {0x00,(0x1b<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device
+ {0x00,(0x1c<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge
+ {0x04,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire
+ {0x04,(0x01<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge
+ {0x04,(0x02<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0},
+ {0x04,(0x03<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0},
+ {0x04,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0},
+ {0x04,(0x05<<3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0},
+ {0x04,(0x06<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0},
+ {0x04,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0},
+ {0x01,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168
+ {0x02,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0},
+ {0x03,(0x00<<3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0},
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
+
Added: trunk/src/mainboard/roda/rk886ex/m3885.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/m3885.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/m3885.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,417 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <stdlib.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <delay.h>
+
+#include "ec.h"
+#include "m3885.h"
+
+#define TH0LOW 80
+#define TH0HIGH 85
+#define TH0CRIT 120
+#define TH1LOW 75
+#define TH1HIGH 80
+
+static u8 variables[] = {
+ /* Offs, AND, OR */
+ 0x08, 0x48, 0x6C, // Keyboard ScanCode Set & LED Data (kState1)
+ 0x0a, 0x01, 0x00, // Keyboard Shift flags (kState3)
+ 0x0c, 0x80, 0x08, // Keyboard State flags (kState5)
+ 0x11, 0xff, 0x06, // Make/Break Debounce #'s (debounce)
+ 0x13, 0xff, 0x00, // HotKey1 ScanCode (hotKey1)
+ 0x14, 0xff, 0x00, // HotKey2 ScanCode (hotKey2)
+ 0x15, 0xff, 0x3f, // HotKey3 ScanCode (hotKey3)
+ 0x16, 0xff, 0x00, // HotKey4 ScanCode (hotKey4)
+ 0x17, 0xff, 0x00, // HotKey5 ScanCode (hotKey5)
+ 0x18, 0xff, 0x0e, // HotKey6 ScanCode (hotKey6)
+ 0x19, 0xff, 0x9f, // HotKey1 Task = c5 Command Data (keyTsk1)
+ 0x1a, 0xff, 0x9f, // HotKey2 Task = c5 Command Data (keyTsk2)
+ 0x1b, 0xff, 0x6a, // HotKey3 Task = c5 Command Data (keyTsk3)
+ 0x1c, 0xff, 0x9f, // HotKey4 Task = c5 Command Data (keyTsk4)
+ 0x1d, 0xff, 0x9f, // HotKey5 Task = c5 Command Data (keyTsk5)
+ 0x1e, 0xff, 0x87, // FuncKey Task = c5 Command Data (funcTsk)
+ 0x1f, 0xff, 0x9f, // Delayed Task = c5 Command Data (dlyTsk1)
+ 0x20, 0xff, 0x9f, // Wake-Up Task = c5 Command Data (wakeTsk)
+ //
+ 0x21, 0xff, 0x08, // WigglePin Pulse Width * 2.4ms (tmPulse)
+ 0x24, 0xff, 0x30, // Keyboard State Flags (kState7)
+ //
+ 0x2b, 0xff, 0x00, //
+ 0x2c, 0xff, 0x80, // Set Fn-Key 8
+ 0x2d, 0xff, 0x02, // Set Fn-Key 9
+ 0x2e, 0xff, 0x00, // Set Fn-Key 1-8 task (0 = SMI)
+ 0x2f, 0xff, 0x00, // Set Fn-Key 9-12 task (1 = SCI)
+};
+
+static u8 matrix[] = {
+ 0xc1,0xc0,0xd8,0xdb,0xbf,0x05,0x76,0xbf, // (0x00-0x07)
+ 0xbf,0x80,0x78,0xbf,0xbf,0x07,0x88,0xc2, // (0x08-0x0f)
+ 0x03,0x09,0xd9,0x16,0xbf,0x06,0x0e,0x81, // (0x10-0x17)
+ 0xbf,0xbf,0xee,0xbf,0xbf,0x55,0x9a,0x89, // (0x18-0x1f)
+ 0x1e,0x15,0x36,0xda,0xe8,0xbf,0x0d,0xbf, // (0x20-0x27)
+ 0xbf,0xbf,0xbf,0xa3,0xbf,0x4e,0x66,0x8b, // (0x28-0x2f)
+ 0x1d,0x2e,0xe6,0xe7,0xe5,0x1c,0x58,0xbf, // (0x30-0x37)
+ 0x82,0xbf,0xf0,0xbf,0xbf,0x5b,0x5d,0x8c, // (0x38-0x3f)
+ 0x22,0x25,0x2c,0x35,0xe1,0x1a,0x96,0xbf, // (0x40-0x47)
+ 0xbf,0xbf,0xec,0xbf,0xbf,0x54,0xf1,0x8f, // (0x48-0x4f)
+ 0x1b,0x2a,0x2b,0x32,0xe9,0x31,0x29,0x61, // (0x50-0x57)
+ 0xbf,0xbf,0x8d,0xbf,0x86,0xc3,0x92,0x93, // (0x58-0x5f)
+ 0x21,0x23,0x34,0x33,0x41,0xe0,0xbf,0xbf, // (0x60-0x67)
+ 0xbf,0x85,0xeb,0xbf,0xb6,0xbf,0x91,0xbf, // (0x68-0x6f)
+ 0x26,0x24,0x2d,0xe3,0xe2,0xe4,0xbf,0xbf, // (0x70-0x77)
+ 0x87,0xbf,0xea,0xbf,0xbf,0x52,0x90,0x8e, // (0x78-0x7f)
+};
+
+static u8 function_ram[] = {
+ 0x04,0xbd,0x0c,0xbe,0x7e,0x9a,0x8a,0xb6, // (0xc0-0xc3)
+ 0x92,0x8f,0x93,0x8e,0x81,0x86,0x82,0x87, // (0xc4-0xc7)
+ 0x8a,0x9a,0x8d,0x7e,0x88,0x84,0x7e,0x78, // (0xc8-0xcb)
+ 0x77,0x07,0x77,0x98,0x89,0xb2,0x05,0x9b, // (0xcc-0xcf)
+ 0x78,0x84,0x07,0x88,0x8a,0x7e,0x05,0xa6, // (0xd0-0xd3)
+ 0x06,0xa7,0x04,0xa8,0x0c,0xa9,0x03,0xaa, // (0xd4-0xd7)
+ 0x0b,0xc1,0x83,0xc0,0x0a,0xad,0x01,0xae, // (0xd8-0xdb)
+ 0x09,0xaf,0x78,0xb0,0x07,0xb1,0x1a,0x61, // (0xdc-0xdf)
+ 0x3b,0x69,0x42,0x72,0x4b,0x7a,0x3c,0x6b, // (0xe0-0xe3)
+ 0x43,0x73,0x44,0x74,0x3d,0x6c,0x3e,0x75, // (0xe4-0xe7)
+ 0x46,0x7d,0x3a,0x70,0x49,0x71,0x4a,0x94, // (0xe8-0xeb)
+ 0x4c,0x79,0x4c,0x7c,0x45,0x7c,0x45,0x79, // (0xec-0xef)
+ 0x4d,0x7b,0x5a,0x95,0x4c,0x7b,0x45,0x7b, // (0xf0-0xf3)
+ 0x4d,0x79,0x4d,0x7c,0x4e,0x7b,0x54,0x95, // (0xf4-0xf7)
+ 0x52,0x7c,0x45,0x94,0x4a,0x79,0xb3,0x95, // (0xf8-0xfb)
+ 0xb4,0x7b,0xb5,0x7c,0x00,0x00,0x55,0x79, // (0xfc-0xff)
+};
+
+
+#define KBD_DATA 0x60
+#define KBD_SC 0x64
+
+#define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec)
+#define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host)
+
+static int send_kbd_command(u8 command)
+{
+ int timeout;
+
+ timeout = 0x7ff;
+ while ((inb(KBD_SC) & KBD_IBF) && --timeout) {
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk_spew(".");
+ }
+ if (!timeout) {
+ printk_debug("Timeout while sending command 0x%02x to EC!\n",
+ command);
+ // return -1;
+ }
+
+ outb(command, KBD_SC);
+ return 0;
+}
+
+static int send_kbd_data(u8 data)
+{
+ int timeout;
+
+ timeout = 0x7ff;
+ while ((inb(KBD_SC) & KBD_IBF) && --timeout) { // wait for IBF = 0
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk_spew(".");
+ }
+ if (!timeout) {
+ printk_debug("Timeout while sending data 0x%02x to EC!\n",
+ data);
+ // return -1;
+ }
+
+ outb(data, KBD_DATA);
+
+ return 0;
+}
+
+
+static u8 recv_kbd_data(void)
+{
+ int timeout;
+ u8 data;
+
+ timeout = 0x7fff;
+ while (--timeout) { // Wait for OBF = 1
+ if (inb(KBD_SC) & KBD_OBF) {
+ break;
+ }
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk_spew(".");
+ }
+ if (!timeout) {
+ printk_debug("\nTimeout while receiving data from EC!\n");
+ // return -1;
+ }
+
+ data = inb(KBD_DATA);
+
+ return data;
+}
+
+
+static u8 m3885_get_variable(u8 index)
+{
+ u8 ret;
+
+ send_kbd_command(0xb8);
+ send_kbd_data(index);
+ send_kbd_command(0xbc);
+ send_kbd_command(0xff);
+ ret = recv_kbd_data();
+ printk_spew("m3885: get variable %02x = %02x\n", index, ret);
+ return ret;
+}
+
+static void m3885_set_variable(u8 index, u8 data)
+{
+ printk_spew("m3885: set variable %02x = %02x\n", index, data);
+ send_kbd_command(0xb8);
+ send_kbd_data(index);
+ send_kbd_command(0xbd);
+ send_kbd_data(data);
+}
+
+static void m3885_set_proc_ram(u8 index, u8 data)
+{
+ printk_spew("m3885: set procram %02x = %02x\n", index, data);
+ send_kbd_command(0xb8);
+ send_kbd_data(index);
+ send_kbd_command(0xbb);
+ send_kbd_data(data);
+}
+
+static u8 m3885_get_proc_ram(u8 index)
+{
+ u8 ret;
+
+ send_kbd_command(0xb8);
+ send_kbd_data(index);
+ send_kbd_command(0xba);
+ // send_kbd_command(0xff);
+ ret = recv_kbd_data();
+ printk_spew("m3885: get procram %02x = %02x\n", index, ret);
+ return ret;
+}
+
+static u8 m3885_read_port(void)
+{
+ u8 reg8;
+
+ reg8 = m3885_get_variable(0x0c);
+ reg8 &= ~(7 << 4);
+ reg8 |= (4 << 4); // bank 4
+ m3885_set_variable(0x0c, reg8);
+
+ /* P6YSTATE */
+ return m3885_get_proc_ram(0xf8);
+}
+
+void m3885_configure_multikey(void)
+{
+ int i;
+ u8 reg8;
+ u8 kstate5_flags, offs, maxvars;
+
+ /* ram bank 0 */
+ kstate5_flags = m3885_get_variable(0x0c);
+ m3885_set_variable(0x0c, kstate5_flags & ~(7 << 4));
+
+ /* Write Matrix to bank 0 */
+ for (i=0; i < ARRAY_SIZE(matrix); i++) {
+ m3885_set_proc_ram(i + 0x80, matrix[i]);
+ }
+
+
+ /* ram bank 2 */
+ m3885_set_variable(0x0c, (kstate5_flags & (~(7 << 4))) | (2 << 4));
+
+ /* Get the number of variables */
+ maxvars = m3885_get_variable(0x00);
+ printk_debug("M388x has %d variables in bank 2.\n", maxvars);
+ if (maxvars >= 35) {
+ offs = m3885_get_variable(0x23);
+ if ((offs > 0xc0) || (offs < 0x80)) {
+ printk_debug("M388x does not have a valid ram offset (0x%x)\n", offs);
+ } else {
+ printk_debug("Writing Fn-Table to M388x RAM offset 0x%x\n", offs);
+ for (i=0; i < ARRAY_SIZE(function_ram); i++) {
+ m3885_set_proc_ram(i + offs, function_ram[i]);
+ }
+ }
+ } else {
+ printk_debug("Could not load Function-RAM (%d).\n", maxvars);
+ }
+
+ // restore original bank
+ m3885_set_variable(0x0c, kstate5_flags);
+ maxvars = m3885_get_variable(0x00);
+ printk_debug("M388x has %d variables in original bank.\n", maxvars);
+ for (i=0; i<ARRAY_SIZE(variables); i+=3) {
+ u8 reg8;
+ if(variables[i + 0] > maxvars)
+ continue;
+ reg8 = m3885_get_variable(variables[i + 0]);
+ reg8 &= ~(variables[i + 1]);
+ reg8 |= variables[i + 2]; // & ~variables[i + 1];
+ m3885_set_variable(variables[i + 0], reg8);
+ }
+
+ /* OEM Init */
+
+ /* Set Bank 1 */
+ m3885_set_variable(0x0c, (kstate5_flags & ~(7 << 4)) | (1 << 4));
+
+ /* Set SMI# at P5.1 */
+ /* SMI Control -> p5.1 = EXTSMI# */
+ m3885_set_proc_ram(0xff, 0xc1);
+
+ /* Set Fn-Key Task 0 -> SMI#/SCI */
+ m3885_set_proc_ram(0x6d, 0x81);
+
+ /* Set Fn-Key Task 1 -> SCI */
+ m3885_set_proc_ram(0x6c, 0x80);
+
+ /* Number of Thermal Sensors */
+ m3885_set_proc_ram(0xf2, 0x02);
+
+ /* Critical Task */
+ m3885_set_proc_ram(0xf3, 0x5d);
+
+ /* Thermal Polling Period */
+ m3885_set_proc_ram(0xf9, 0x0a);
+
+ /* ReadPort */
+ // m3885_set_variable(0x0c, (kstate5_flags & ~(7 << 4)) | (4 << 4));
+
+ /* AC PRESN# */
+ if (m3885_read_port() & (1 << 0))
+ reg8 = 0x8a;
+ else
+ reg8 = 0x9a;
+ m3885_set_proc_ram(0xd0, reg8); // P60SPEC
+
+ /* SENSE1# */
+ if (m3885_read_port() & (1 << 2))
+ reg8 = 0x8a;
+ else
+ reg8 = 0x9a;
+ m3885_set_proc_ram(0xd2, reg8); // P62SPEC
+
+ /* SENSE2# */
+ if (m3885_read_port() & (1 << 3))
+ reg8 = 0x8a;
+ else
+ reg8 = 0x9a;
+ m3885_set_proc_ram(0xd3, reg8); // P63SPEC
+
+ /* Low Active Port */
+ m3885_set_proc_ram(0xd1, 0x88); // P61SPEC
+ m3885_set_proc_ram(0xd6, 0x88); // P66SPEC
+ m3885_set_proc_ram(0xd7, 0x88); // P67SPEC
+
+ /* High Active Port */
+ m3885_set_proc_ram(0xd4, 0x98); // P64SPEC
+ m3885_set_proc_ram(0xd5, 0x98); // P65SPEC
+
+ /* Set P60TASK-P67TASK */
+ /* SCI */
+ m3885_set_proc_ram(0xda, 0x80); // P62TASK SENSE1#
+ m3885_set_proc_ram(0xdb, 0x80); // P63TASK SENSE2#
+ m3885_set_proc_ram(0xdd, 0x80); // P65TASK PROCHOT
+ m3885_set_proc_ram(0xde, 0x80); // P65TASK THERMTRIP#
+ m3885_set_proc_ram(0xdf, 0x80); // P65TASK PME#
+ /* SMI/SCI */
+ m3885_set_proc_ram(0xd8, 0x81); // P60TASK, AC_PRESN#
+ m3885_set_proc_ram(0xd9, 0x81); // P61TASK, LID#
+ m3885_set_proc_ram(0xdc, 0x81); // P64TASK, FDD/LPT#
+
+ /* Thermal */
+ /* Bank 5 */
+ m3885_set_variable(0x0c, (kstate5_flags & ~(7 << 4)) | (5 << 4));
+
+ /* Thermal 0: Active cooling, Speed Step Down */
+ m3885_set_proc_ram(0x81, 0x9c); // THRM0
+ m3885_set_proc_ram(0x82, 0x01); // THRM0 CMD
+ m3885_set_proc_ram(0x84, TH0LOW); // THRM0 LOW
+ m3885_set_proc_ram(0x85, TH0HIGH); // THRM0 HIGH
+ m3885_set_proc_ram(0x86, 0x81); // Set Task SMI#/SCI
+ m3885_set_proc_ram(0x87, TH0CRIT); // THRM0 CRIT
+
+ /* Thermal 1: Passive cooling, Fan On */
+ m3885_set_proc_ram(0x89, 0x9c); // THRM1
+ m3885_set_proc_ram(0x8a, 0x01); // THRM1 CMD
+ m3885_set_proc_ram(0x8c, TH1LOW); // THRM1 LOW
+ m3885_set_proc_ram(0x8d, TH1HIGH); // THRM1 HIGH
+ m3885_set_proc_ram(0x8e, 0x81); // Set Task SMI#/SCI
+
+ /* Switch Task to SMI */
+ udelay(100 * 1000); // 100ms
+ outb(KBD_SC, 0xca);
+ udelay(100 * 1000); // 100ms
+ outb(KBD_DATA, 0x17);
+
+ /* Set P22 to high level, keyboard backlight default off */
+ udelay(100 * 1000); // 100ms
+ outb(KBD_SC, 0xc5);
+ udelay(100 * 1000); // 100ms
+ outb(KBD_DATA, 0x4a);
+}
+
+u8 m3885_gpio(u8 value)
+{
+#if 0
+ int timeout;
+#endif
+
+ /* First write data */
+ ec_write(M3885_CMDAT1, value);
+
+ /* Issue command: ACCESS GPIO */
+ ec_write(M3885_CMCMD, 0xc5);
+
+#if 0
+ /* CMCMD is 0 when the command is completed */
+ timeout = 0xf;
+ while (ec_read(M3885_CMCMD) && --timeout) {
+ udelay(10);
+ printk_debug(".");
+ }
+ if (!timeout) {
+ printk_debug("\nTimeout while waiting for M3885 command!\n");
+ }
+
+ /* If it was a read function: Pin state */
+ return ec_read(M3885_CMDAT1);
+#else
+ return 0;
+#endif
+}
+
Added: trunk/src/mainboard/roda/rk886ex/m3885.h
===================================================================
--- trunk/src/mainboard/roda/rk886ex/m3885.h (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/m3885.h 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _MAINBOARD_M3885_H
+#define _MAINBOARD_M3885_H
+
+#define M3885_CMCMD 0x04
+#define M3885_CMDAT1 0x05
+#define M3885_CMDAT2 0x06
+#define M3885_CMDAT3 0x07
+
+#define M3885_GPIO_LEVEL (0<<7)
+#define M3885_GPIO_PULSE (1<<7)
+
+#define M3885_GPIO_READ (0<<5)
+#define M3885_GPIO_SET (1<<5)
+#define M3885_GPIO_CLEAR (2<<5)
+#define M3885_GPIO_TOGGLE (3<<5)
+
+#define M3885_GPIO_P14 (0x00<<0)
+#define M3885_GPIO_P15 (0x01<<0)
+#define M3885_GPIO_P16 (0x02<<0)
+#define M3885_GPIO_P17 (0x03<<0)
+
+#define M3885_GPIO_P54 (0x04<<0)
+#define M3885_GPIO_P55 (0x05<<0)
+#define M3885_GPIO_P56 (0x06<<0)
+#define M3885_GPIO_P57 (0x07<<0)
+
+#define M3885_GPIO_P20 (0x08<<0)
+#define M3885_GPIO_P21 (0x09<<0)
+#define M3885_GPIO_P22 (0x0a<<0)
+#define M3885_GPIO_P23 (0x0b<<0)
+#define M3885_GPIO_P24 (0x0c<<0)
+#define M3885_GPIO_P25 (0x0d<<0)
+#define M3885_GPIO_P26 (0x0e<<0)
+#define M3885_GPIO_P27 (0x0f<<0)
+
+#define M3885_GPIO_P40 (0x10<<0)
+#define M3885_GPIO_P41 (0x11<<0)
+#define M3885_GPIO_P42 (0x12<<0)
+#define M3885_GPIO_P43 (0x13<<0)
+#define M3885_GPIO_P44 (0x14<<0)
+#define M3885_GPIO_P45 (0x15<<0)
+#define M3885_GPIO_P46 (0x16<<0)
+#define M3885_GPIO_P47 (0x17<<0)
+
+#define M3885_GPIO_P60 (0x18<<0)
+#define M3885_GPIO_P61 (0x19<<0)
+#define M3885_GPIO_P62 (0x1a<<0)
+#define M3885_GPIO_P63 (0x1b<<0)
+#define M3885_GPIO_P64 (0x1c<<0)
+#define M3885_GPIO_P65 (0x1d<<0)
+#define M3885_GPIO_P66 (0x1e<<0)
+#define M3885_GPIO_P67 (0x1f<<0)
+
+void m3885_configure_multikey(void);
+u8 m3885_gpio(u8 value);
+
+#endif
Added: trunk/src/mainboard/roda/rk886ex/mainboard.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/mainboard.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/mainboard.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,147 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <delay.h>
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#include <x86emu/x86emu.h>
+#endif
+#include "chip.h"
+
+#include "ec.h"
+#include "m3885.h"
+
+#define DUMP_RUNTIME_REGISTERS 0
+
+static void backlight_enable(void)
+{
+#if 0
+// Disabled, don't let the X9511 burn out
+ int i;
+
+ /* P56 is Brightness Up, and it needs a Pulse instead of a
+ * Level
+ */
+ for (i=0; i < 28; i++) {
+ //m3885_gpio(M3885_GPIO_PULSE|M3885_GPIO_SET|M3885_GPIO_P56);
+ m3885_gpio(M3885_GPIO_PULSE|M3885_GPIO_TOGGLE|M3885_GPIO_P56);
+ }
+#endif
+ printk_debug("Display I/O: 0x%02x\n", inb(0x60f));
+}
+
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+static int int15_handler(void)
+{
+ u8 display_id;
+#define BOOT_DISPLAY_DEFAULT 0
+#define BOOT_DISPLAY_CRT (1 << 0)
+#define BOOT_DISPLAY_TV (1 << 1)
+#define BOOT_DISPLAY_EFP (1 << 2)
+#define BOOT_DISPLAY_LCD (1 << 3)
+#define BOOT_DISPLAY_CRT2 (1 << 4)
+#define BOOT_DISPLAY_TV2 (1 << 5)
+#define BOOT_DISPLAY_EFP2 (1 << 6)
+#define BOOT_DISPLAY_LCD2 (1 << 7)
+
+ printk_debug("%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
+ __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
+
+ switch (M.x86.R_AX) {
+ case 0x5f35: /* Boot Display */
+ M.x86.R_AX = 0x005f; // Success
+ M.x86.R_CL = BOOT_DISPLAY_DEFAULT;
+ break;
+ case 0x5f40: /* Boot Panel Type */
+ /* LCD panel type is SIO GPIO40-43 */
+ // display_id = inb(0x60f) & 0x0f;
+ display_id = 3;
+ // M.x86.R_AX = 0x015f; // Supported but failed
+ M.x86.R_AX = 0x005f; // Success
+ M.x86.R_CL = display_id;
+ break;
+ default:
+ /* Interrupt was not handled */
+ return 0;
+ }
+
+ /* Interrupt handled */
+ return 1;
+}
+
+static void int15_install(void)
+{
+ typedef int (* yabel_handleIntFunc)(void);
+ extern yabel_handleIntFunc yabel_intFuncArray[256];
+ yabel_intFuncArray[0x15] = int15_handler;
+}
+#endif
+
+#if DUMP_RUNTIME_REGISTERS
+static void dump_runtime_registers(void)
+{
+ int i;
+
+ printk_debug("SuperIO runtime register block:\n");
+ for (i=0; i<0x10; i++)
+ printk_debug("%02x ", i);
+ printk_debug("\n");
+ for (i=0; i<0x10; i++)
+ printk_debug("%02x ", inb(0x600 +i));
+ printk_debug("\n");
+}
+#endif
+
+static void mainboard_enable(device_t dev)
+{
+ /* Configure the MultiKey controller */
+ // m3885_configure_multikey();
+
+ /* Enable LCD Backlight */
+ backlight_enable();
+
+ /* Disable Dummy DCC -> GP45 = 1 */
+ outb(inb(0x60f) | (1 << 5), 0x60f);
+
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+ /* Install custom int15 handler for VGA OPROM */
+ int15_install();
+#endif
+#if DUMP_RUNTIME_REGISTERS
+ dump_runtime_registers();
+#endif
+}
+
+int add_northbridge_resources(struct lb_memory *mem);
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+ return add_northbridge_resources(mem);
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("Roda Computer GmbH RK886EX Rugged Notebook (ROCKY3+)")
+ .enable_dev = mainboard_enable,
+};
+
Added: trunk/src/mainboard/roda/rk886ex/mainboard_smi.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/mainboard_smi.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/mainboard_smi.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include "../../../southbridge/intel/i82801gx/i82801gx_nvs.h"
+
+/* The southbridge SMI handler checks whether gnvs has a
+ * valid pointer before calling the trap handler
+ */
+extern global_nvs_t *gnvs;
+
+int mainboard_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x99:
+ printk_debug("Sample\n");
+ //gnvs->smif = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ /* On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ *
+ * For now, we force the return value to 0 and log all traps to
+ * see what's going on.
+ */
+ //gnvs->smif = 0;
+ return 1;
+}
+
Added: trunk/src/mainboard/roda/rk886ex/mptable.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/mptable.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/mptable.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <string.h>
+#include <stdint.h>
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "COREBOOT";
+ static const char productid[12] = "RK886EX ";
+ struct mp_config_table *mc;
+ int i;
+ int max_pci_bus, isa_bus;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ max_pci_bus = 5; // XXX read me from bridges.
+
+ /* ISA bus follows */
+ isa_bus = max_pci_bus + 1;
+
+ /* Bus: Bus ID Type */
+ for (i=0; i <= max_pci_bus; i++)
+ smp_write_bus(mc, i, "PCI ");
+
+ smp_write_bus(mc, isa_bus, "ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+ smp_write_ioapic(mc, 2, 0x20, 0xfec00000);
+
+ /* Legacy Interrupts */
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, 0x2, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x1, 0x2, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, 0x2, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x3, 0x2, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x4, 0x2, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x8, 0x2, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x9, 0x2, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xa, 0x2, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xb, 0x2, 0xb);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xc, 0x2, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xd, 0x2, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xe, 0x2, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xf, 0x2, 0xf);
+
+ /* Builtin devices on Bus 0 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x17);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, 0x2, 0x11);
+
+ /* Firewire 4:0.0 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10);
+
+ // riser slot top 5:8.0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14);
+ // riser slot middle 5:9.0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x24, 0x2, 0x15);
+ // riser slot bottom 5:a.0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16);
+
+ /* Onboard Ethernet */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10);
+
+ /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1);
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+
+ printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
+
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
Added: trunk/src/mainboard/roda/rk886ex/rtl8168.c
===================================================================
--- trunk/src/mainboard/roda/rk886ex/rtl8168.c (rev 0)
+++ trunk/src/mainboard/roda/rk886ex/rtl8168.c 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This code should work for all ICH* southbridges with a NIC. */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+static void nic_init(struct device *dev)
+{
+ printk_debug("Initializing RTL8168 Gigabit Ethernet\n");
+ // Nothing to do yet, but this has to be here to keep
+ // coreboot from trying to execute an option ROM.
+}
+
+static struct device_operations nic_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = nic_init,
+ .scan_bus = 0,
+};
+
+static const struct pci_driver rtl8169_nic __pci_driver = {
+ .ops = &nic_ops,
+ .vendor = 0x10ec,
+ .device = 0x8168,
+};
+
+
Added: trunk/targets/roda/rk886ex/Config-abuild.lb
===================================================================
--- trunk/targets/roda/rk886ex/Config-abuild.lb (rev 0)
+++ trunk/targets/roda/rk886ex/Config-abuild.lb 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,29 @@
+# This will make a target directory of ./VENDOR_MAINBOARD
+
+target VENDOR_MAINBOARD
+mainboard VENDOR/MAINBOARD
+
+option CC="CROSSCC"
+option CONFIG_CROSS_COMPILE="CROSS_PREFIX"
+option HOSTCC="CROSS_HOSTCC"
+
+__COMPRESSION__
+__LOGLEVEL__
+
+option CONFIG_ROM_SIZE=1024*1024
+
+romimage "normal"
+ option CONFIG_USE_FALLBACK_IMAGE=0
+ option COREBOOT_EXTRA_VERSION=".0-normal"
+ payload __PAYLOAD__
+end
+
+romimage "fallback"
+ option CONFIG_USE_FALLBACK_IMAGE=1
+ option COREBOOT_EXTRA_VERSION=".0-fallback"
+ payload __PAYLOAD__
+end
+
+buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback"
+#pci_rom ../../../misc/roda-pci8086,27a2.rom vendor_id=0x8086 device_id=0x27a2
+
Added: trunk/targets/roda/rk886ex/Config.lb
===================================================================
--- trunk/targets/roda/rk886ex/Config.lb (rev 0)
+++ trunk/targets/roda/rk886ex/Config.lb 2010-01-17 14:08:17 UTC (rev 5031)
@@ -0,0 +1,22 @@
+target roda_rk886ex
+mainboard roda_rk886ex
+
+## CONFIG_ROM_SIZE is the total number of bytes allocated for coreboot use
+## (normal AND fallback images and payloads).
+option CONFIG_ROM_SIZE = 1024*1024
+
+## CONFIG_ROM_IMAGE_SIZE is the maximum number of bytes allowed for a coreboot image,
+## not including any payload.
+option CONFIG_ROM_IMAGE_SIZE = 0x26000
+
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image
+## (including payload) will use
+option CONFIG_FALLBACK_SIZE = ROM_SIZE
+
+romimage "fallback"
+ option CONFIG_USE_FALLBACK_IMAGE=1
+ #payload $(HOME)/filo.elf
+ payload /dev/zero
+end
+
+buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback"
More information about the coreboot
mailing list