[coreboot] [commit] r5026 - in trunk/src/southbridge/intel/i82801gx: . acpi
svn at coreboot.org
svn at coreboot.org
Sun Jan 17 14:49:08 CET 2010
Author: stepan
Date: 2010-01-17 14:49:07 +0100 (Sun, 17 Jan 2010)
New Revision: 5026
Modified:
trunk/src/southbridge/intel/i82801gx/acpi/sleepstates.asl
trunk/src/southbridge/intel/i82801gx/i82801gx.h
trunk/src/southbridge/intel/i82801gx/i82801gx_lpc.c
trunk/src/southbridge/intel/i82801gx/i82801gx_smi.c
trunk/src/southbridge/intel/i82801gx/i82801gx_smihandler.c
trunk/src/southbridge/intel/i82801gx/i82801gx_usb.c
Log:
ICH7 update
* change the code to use macros names instead of constants in many places
* SMI/ACPI: rework power-off code to work with old Linux kernels (2.6.12.x)
* SMI: Add support for mainboard GPI handler
* SMI: immediate power-off on power button press, if OSPM is not active
* Add fix for some USB errata
* Some register tweaks for mobile systems
* Enable configure SCI on interrupt 9 correctly.
Signed-off-by: Stefan Reinauer <stepan at coresystems.de>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Peter Stuge <peter at stuge.se>
Modified: trunk/src/southbridge/intel/i82801gx/acpi/sleepstates.asl
===================================================================
--- trunk/src/southbridge/intel/i82801gx/acpi/sleepstates.asl 2010-01-17 13:47:35 UTC (rev 5025)
+++ trunk/src/southbridge/intel/i82801gx/acpi/sleepstates.asl 2010-01-17 13:49:07 UTC (rev 5026)
@@ -19,9 +19,9 @@
* MA 02110-1301 USA
*/
-Name(\_S0, Package(){0x0,0x0,0,0})
-Name(\_S1, Package(){0x1,0x0,0,0})
-Name(\_S3, Package(){0x5,0x0,0,0})
-Name(\_S4, Package(){0x6,0x0,0,0})
-Name(\_S5, Package(){0x7,0x0,0,0})
+Name(\_S0, Package(){0x0,0x0,0x0,0x0})
+// Name(\_S1, Package(){0x1,0x1,0x0,0x0})
+Name(\_S3, Package(){0x5,0x5,0x0,0x0})
+Name(\_S4, Package(){0x6,0x6,0x0,0x0})
+Name(\_S5, Package(){0x7,0x7,0x0,0x0})
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx.h
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx.h 2010-01-17 13:47:35 UTC (rev 5025)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx.h 2010-01-17 13:49:07 UTC (rev 5026)
@@ -32,6 +32,8 @@
/* TODO Make sure these don't get changed by stage2 */
#define DEFAULT_GPIOBASE 0x0480
#define DEFAULT_PMBASE 0x0500
+
+#define IO_APIC_ADDR 0xfec00000
#define HPET_ADDR 0xfed00000
#define DEFAULT_RCBA 0xfed1c000
@@ -276,7 +278,20 @@
/* ICH7 PMBASE */
#define PM1_STS 0x00
+#define WAK_STS (1 << 15)
+#define PCIEXPWAK_STS (1 << 14)
+#define PRBTNOR_STS (1 << 11)
+#define RTC_STS (1 << 10)
+#define PWRBTN_STS (1 << 8)
+#define GBL_STS (1 << 5)
+#define BM_STS (1 << 4)
+#define TMROF_STS (1 << 0)
#define PM1_EN 0x02
+#define PCIEXPWAK_DIS (1 << 14)
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
#define PM1_CNT 0x04
#define SLP_EN (1 << 13)
#define SLP_TYP (7 << 10)
@@ -290,8 +305,24 @@
#define LV4 0x16
#define PM2_CNT 0x20 // mobile only
#define GPE0_STS 0x28
+#define USB4_STS (1 << 14)
+#define PME_B0_STS (1 << 13)
+#define USB3_STS (1 << 12)
+#define PME_STS (1 << 11)
+#define BATLOW_STS (1 << 10)
+#define PCI_EXP_STS (1 << 9)
+#define RI_STS (1 << 8)
+#define SMB_WAK_STS (1 << 7)
+#define TCOSCI_STS (1 << 6)
+#define AC97_STS (1 << 5)
+#define USB2_STS (1 << 4)
+#define USB1_STS (1 << 3)
+#define SWGPE_STS (1 << 2)
+#define HOT_PLUG_STS (1 << 1)
+#define THRM_STS (1 << 0)
#define GPE0_EN 0x2c
#define PME_B0_EN (1 << 13)
+#define PME_EN (1 << 11)
#define SMI_EN 0x30
#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_lpc.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_lpc.c 2010-01-17 13:47:35 UTC (rev 5025)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_lpc.c 2010-01-17 13:49:07 UTC (rev 5026)
@@ -40,8 +40,8 @@
{
int i;
u32 reg32;
- volatile u32 *ioapic_index = (volatile u32 *)0xfec00000;
- volatile u32 *ioapic_data = (volatile u32 *)0xfec00010;
+ volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
+ volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
/* Enable ACPI I/O and power management.
* Set SCI IRQ to IRQ9
@@ -175,7 +175,7 @@
u8 reg8;
u16 reg16, pmbase;
u32 reg32;
- char *state;
+ const char *state;
/* Get the chip configuration */
config_t *config = dev->chip_info;
@@ -238,9 +238,13 @@
/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
reg16 = pci_read_config16(dev, GEN_PMCON_1);
- reg16 &= ~((3 << 0) | (1 << 10));
- reg16 |= (1 << 3) | (1 << 5);
- reg16 |= (1 << 2); // CLKRUN_EN
+ reg16 &= ~(3 << 0); // SMI# rate 1 minute
+ reg16 |= (1 << 2); // CLKRUN_EN - Mobile/Ultra only
+ reg16 |= (1 << 3); // Speedstep Enable - Mobile/Ultra only
+ reg16 |= (1 << 5); // CPUSLP_EN Desktop only
+ // another laptop wants this?
+ // reg16 &= ~(1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only
+ reg16 |= (1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only
#if DEBUG_PERIODIC_SMIS
/* Set DEBUG_PERIODIC_SMIS in i82801gx.h to debug using
* periodic SMIs.
@@ -259,15 +263,10 @@
/* Set up power management block and determine sleep mode */
reg32 = inl(pmbase + 0x04); // PM1_CNT
-#if 0
-#if CONFIG_HAVE_ACPI_RESUME
- acpi_slp_type = (((reg32 >> 10) & 7) == 5) ? 3 : 0;
- printk_debug("PM1_CNT: 0x%08x --> acpi_sleep_type: %x\n",
- reg32, acpi_slp_type);
-#endif
-#endif
- reg32 |= (1 << 1); // enable C3->C0 transition on bus master
- reg32 |= 1; // SCI_EN
+
+ reg32 &= ~(7 << 10); // SLP_TYP
+ reg32 |= (1 << 1); // enable C3->C0 transition on bus master
+ reg32 |= (1 << 0); // SCI_EN
outl(reg32, pmbase + 0x04);
}
@@ -308,10 +307,10 @@
u32 reg32;
/* Move HPET to default address 0xfed00000 and enable it */
- reg32 = RCBA32(0x3404);
+ reg32 = RCBA32(HPTC);
reg32 |= (1 << 7); // HPET Address Enable
reg32 &= ~(3 << 0);
- RCBA32(0x3404) = reg32;
+ RCBA32(HPTC) = reg32;
}
static void enable_clock_gating(void)
@@ -319,16 +318,18 @@
u32 reg32;
/* Enable Clock Gating for most devices */
- reg32 = RCBA32(0x341c);
+ reg32 = RCBA32(CG);
reg32 |= (1 << 31); // LPC clock gating
reg32 |= (1 << 30); // PATA clock gating
// SATA clock gating
reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
reg32 |= (1 << 23); // AC97 clock gating
- reg32 |= (1 << 20) | (1 << 19); // USB EHCI clock gating
+ reg32 |= (1 << 19); // USB EHCI clock gating
reg32 |= (1 << 3) | (1 << 1); // DMI clock gating
reg32 |= (1 << 2); // PCIe clock gating;
- RCBA32(0x341c) = reg32;
+ reg32 &= ~(1 << 20); // No static clock gating for USB
+ reg32 &= ~( (1 << 29) | (1 << 28) ); // Disable UHCI clock gating
+ RCBA32(CG) = reg32;
}
#if CONFIG_HAVE_SMI_HANDLER
@@ -392,10 +393,16 @@
RCBA16(SPIBASE + 2) = spicontrol;
}
-static void i82801gx_fixups(void)
+static void i82801gx_fixups(struct device *dev)
{
/* This needs to happen after PCI enumeration */
RCBA32(0x1d40) |= 1;
+
+ /* USB Transient Disconnect Detect:
+ * Prevent a SE0 condition on the USB ports from being
+ * interpreted by the UHCI controller as a disconnect
+ */
+ pci_write_config8(dev, 0xad, 0x3);
}
static void lpc_init(struct device *dev)
@@ -437,7 +444,8 @@
setup_i8259();
/* The OS should do this? */
- // i8259_configure_irq_trigger(9, 1);
+ /* Interrupt 9 should be level triggered (SCI) */
+ i8259_configure_irq_trigger(9, 1);
#if CONFIG_HAVE_SMI_HANDLER
i82801gx_lock_smm(dev);
@@ -445,7 +453,7 @@
i82801gx_spi_init();
- i82801gx_fixups();
+ i82801gx_fixups(dev);
}
static void i82801gx_lpc_read_resources(device_t dev)
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_smi.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_smi.c 2010-01-17 13:47:35 UTC (rev 5025)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_smi.c 2010-01-17 13:49:07 UTC (rev 5026)
@@ -155,7 +155,35 @@
printk_debug("\n");
}
+
/**
+ * @brief read and clear ALT_GP_SMI_STS
+ * @return ALT_GP_SMI_STS register
+ */
+static u16 reset_alt_gp_smi_status(void)
+{
+ u16 reg16;
+
+ reg16 = inl(pmbase + ALT_GP_SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg16, pmbase + ALT_GP_SMI_STS);
+
+ return reg16;
+}
+
+static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
+{
+ int i;
+ printk_debug("ALT_GP_SMI_STS: ");
+ for (i=15; i<= 0; i--) {
+ if (alt_gp_smi_sts & (1 << i)) printk_debug("GPI%d ", (i-16));
+ }
+ printk_debug("\n");
+}
+
+
+
+/**
* @brief read and clear TCOx_STS
* @return TCOx_STS registers
*/
@@ -212,6 +240,7 @@
void smm_relocate(void)
{
u32 smi_en;
+ u16 pm1_en;
printk_debug("Initializing SMM handler...");
@@ -232,6 +261,7 @@
dump_smi_status(reset_smi_status());
dump_pm1_status(reset_pm1_status());
dump_gpe0_status(reset_gpe0_status());
+ dump_alt_gp_smi_status(reset_alt_gp_smi_status());
dump_tco_status(reset_tco_status());
/* Enable SMI generation:
@@ -244,6 +274,10 @@
*/
smi_en = 0; /* reset SMI enables */
+
+#if 0
+ smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN;
+#endif
smi_en |= TCO_EN;
smi_en |= APMC_EN;
#if DEBUG_PERIODIC_SMIS
@@ -260,6 +294,11 @@
outl(smi_en, pmbase + SMI_EN);
+ pm1_en = 0;
+ pm1_en |= PWRBTN_EN;
+ pm1_en |= GBL_EN;
+ outw(pm1_en, pmbase + PM1_EN);
+
/**
* There are several methods of raising a controlled SMI# via
* software, among them:
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_smihandler.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_smihandler.c 2010-01-17 13:47:35 UTC (rev 5025)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_smihandler.c 2010-01-17 13:49:07 UTC (rev 5026)
@@ -25,14 +25,15 @@
#include <console/console.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/smm.h>
+#include <device/pci_def.h>
#include "i82801gx.h"
#include "i82801gx_power.h"
#define DEBUG_SMI
#define APM_CNT 0xb2
-#define CST_CONTROL 0x85 // 0x85 crashes the box
-#define PST_CONTROL 0x80 // 0x80 crashes the box
+#define CST_CONTROL 0x85
+#define PST_CONTROL 0x80
#define ACPI_DISABLE 0x1e
#define ACPI_ENABLE 0xe1
#define GNVS_UPDATE 0xea
@@ -88,6 +89,8 @@
if (pm1_sts & (1 << 4)) printk_spew("BM ");
if (pm1_sts & (1 << 0)) printk_spew("TMROF ");
printk_spew("\n");
+ int reg16 = inw(pmbase + PM1_EN);
+ printk_spew("PM1_EN: %x\n", reg16);
}
/**
@@ -245,7 +248,42 @@
outb(reg8, pmbase + SMI_EN);
}
+static void busmaster_disable_on_bus(int bus)
+{
+ int slot, func;
+ unsigned int val;
+ unsigned char hdr;
+ for (slot = 0; slot < 0x20; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 reg32;
+ device_t dev = PCI_DEV(bus, slot, func);
+
+ val = pci_read_config32(dev, PCI_VENDOR_ID);
+
+ if (val == 0xffffffff || val == 0x00000000 ||
+ val == 0x0000ffff || val == 0xffff0000)
+ continue;
+
+ /* Disable Bus Mastering for this one device */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* If this is a bridge, then follow it. */
+ hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
+ hdr &= 0x7f;
+ if (hdr == PCI_HEADER_TYPE_BRIDGE ||
+ hdr == PCI_HEADER_TYPE_CARDBUS) {
+ unsigned int buses;
+ buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+ busmaster_disable_on_bus((buses >> 8) & 0xff);
+ }
+ }
+ }
+}
+
+
static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save)
{
u8 reg8;
@@ -281,12 +319,9 @@
case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
case 7:
printk_debug("SMI#: Entering S5 (Soft Power off)\n");
-#if 0
- /* Set PME_B0_EN before going to S5 */
- reg32 = inl(pmbase + GPE0_EN);
- reg32 |= PME_B0_EN;
- outl(reg32, pmbase + GPE0_EN);
-#endif
+
+ outl(0, pmbase + GPE0_EN);
+
/* Should we keep the power state after a power loss?
* In case the setting is "ON" or "OFF" we don't have
* to do anything. But if it's "KEEP" we have to switch
@@ -297,6 +332,9 @@
reg8 |= 1;
pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
}
+
+ /* also iterates over all bridges on bus 0 */
+ busmaster_disable_on_bus(0);
break;
default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break;
}
@@ -376,6 +414,16 @@
pm1_sts = reset_pm1_status();
dump_pm1_status(pm1_sts);
+
+ /* While OSPM is not active, poweroff immediately
+ * on a power button event.
+ */
+ if (pm1_sts & PWRBTN_STS) {
+ // power button pressed
+ u32 reg32;
+ reg32 = (7 << 10) | (1 << 13);
+ outl(reg32, pmbase + PM1_CNT);
+ }
}
static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save)
@@ -386,6 +434,8 @@
dump_gpe0_status(gpe0_sts);
}
+void __attribute__((weak)) mainboard_smi_gpi(u16 gpi_sts);
+
static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_save)
{
u16 reg16;
@@ -393,8 +443,13 @@
outl(reg16, pmbase + ALT_GP_SMI_STS);
reg16 &= inw(pmbase + ALT_GP_SMI_EN);
- if (reg16)
- printk_debug("GPI (mask %04x)\n",reg16);
+
+ if (mainboard_smi_gpi) {
+ mainboard_smi_gpi(reg16);
+ } else {
+ if (reg16)
+ printk_debug("GPI (mask %04x)\n",reg16);
+ }
}
static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_save)
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_usb.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_usb.c 2010-01-17 13:47:35 UTC (rev 5025)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_usb.c 2010-01-17 13:49:07 UTC (rev 5026)
@@ -35,6 +35,10 @@
reg32 = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+ // Erratum
+ pci_write_config8(dev, 0xca, 0x00);
+
+ // Yes. Another Erratum
reg8 = pci_read_config8(dev, 0xca);
reg8 |= (1 << 0);
pci_write_config8(dev, 0xca, reg8);
More information about the coreboot
mailing list