[coreboot] Seabios - VGA & Boot From First Hard Drive Issues
Roger
rogerx.oss at gmail.com
Fri Dec 31 11:54:04 CET 2010
And still getting better here.
I've reset some Seabios config.h options to defaults and disabled FLOPPY
options.
I've gotten all the way to my grub boot, but only on warm booting, and Seabio
seems to leave my ethernet controller unstable during normal manufacture bios
execution, requiring a complete power off (ie. yank cord) to reset it.
Then I get a call trace in dmesg and then things really slow to a crawl.
Looks like I've got some IRQ routing issues from here.
Attaching a completed log. Cheers!
-------------- next part --------------
coreboot-4.0-r6225 Fri Dec 31 00:47:32 AKST 2010 starting...
DIMM 0: 50
00: 80 08 04 0c 0a 01 40 00 01 a0 60 00 80 08 00 01
10: 8f 04 04 01 01 00 0e 00 00 00 00 14 14 14 32 20
20: 20 10 20 10 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 14
40: 7f 7f 98 ff ff ff ff ff 49 33 30 30 30 30 39 32
50: 36 2d 30 30 20 20 20 20 20 20 20 41 20 30 36 32
60: 31 30 30 20 53 4f 55 54 48 4c 41 4e 44 20 4d 49
70: 43 52 4f 20 53 59 53 54 45 4d 53 20 30 32 64 a4
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
DIMM 1: 51
00: 80 08 04 0c 0a 01 40 00 01 80 60 00 80 08 00 01
10: 8f 04 06 01 01 00 0e a0 60 00 00 14 14 14 30 20
20: 20 10 20 10 ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 12 da
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 64 f7
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
DIMM 2: 52
00: 80 08 04 0c 09 02 40 00 01 a0 60 00 80 08 00 01
10: 8f 04 06 01 01 00 0e a0 60 00 00 14 14 14 32 10
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 12 88
40: 7f d0 00 00 00 00 00 00 ff 44 4d 31 36 36 35 56
50: 53 36 35 38 30 34 58 31 30 32 47 ff ff ff ff ff
60: ff ff ff 4d 45 4d 4f 52 59 20 43 41 52 44 20 54
70: 45 43 48 4e 4f 4c 4f 47 59 20 55 53 41 20 64 f6
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
DIMM 3: 53
00: bad device
Northbridge prior to SDRAM init:
PCI: 00:00.00
00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 80 00 ff 00 00 00 09 03 30 33 33 33 33 33 33
60: 10 10 20 20 28 30 30 30 00 ec 3f 00 a0 fa 00 00
70: 20 1f 0a 78 22 05 00 00 00 35 10 38 10 00 00 00
80: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 98 aa 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 02 03 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 9e 17 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 84 ff 1f 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00
Found DIMM in slot 0
Found DIMM in slot 1
Found DIMM in slot 2
PGPOL[BPR] has been set to 0x35
RPS has been set to 0x0522
NBXECC[31:24] has been set to 0xff
DRAMC has been set to 0x08
RAM Enable 1: Apply NOP
RAM Enable 2: Precharge all
RAM Enable 3: CBR
RAM Enable 4: Mode register set
RAM Enable 5: Normal operation
RAM Enable 6: Enable refresh
Enabling refresh (DRAMC = 0x09) for DIMM 00
Enabling refresh (DRAMC = 0x09) for DIMM 01
Enabling refresh (DRAMC = 0x09) for DIMM 02
Northbridge following SDRAM init:
PCI: 00:00.00
00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 80 00 ff 00 00 00 09 03 30 33 33 33 33 33 33
60: 10 10 20 20 28 30 30 30 00 ec 3f 00 a0 fa 00 00
70: 20 1f 0a 78 22 05 00 00 00 35 10 38 10 00 00 00
80: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 98 aa 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 02 03 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 9e 17 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 84 ff 1f 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00
Loading image.
Check CBFS header at fffffc9e
magic is 4f524243
Found CBFS header at fffffc9e
Check fallback/romstage
CBFS: follow chain: fffc0000 + 38 + 3436 + align -> fffc3480
Check fallback/coreboot_ram
Stage: loading fallback/coreboot_ram @ 0x100000 (212992 bytes), entry @ 0x100000
Stage: done loading.
Jumping to image.
coreboot-4.0-r6225 Fri Dec 31 00:47:32 AKST 2010 booting...
clocks_per_usec: 452
Enumerating buses...
Show all devs...Before device enumeration.
Root Device: enabled 1
APIC_CLUSTER: 0: enabled 1
APIC: 00: enabled 1
PCI_DOMAIN: 0000: enabled 1
PCI: 00:00.0: enabled 1
PCI: 00:01.0: enabled 1
PCI: 00:04.0: enabled 1
PNP: 03f0.0: enabled 1
PNP: 03f0.1: enabled 1
PNP: 03f0.2: enabled 1
PNP: 03f0.3: enabled 1
PNP: 03f0.5: enabled 1
PNP: 03f0.7: enabled 1
PNP: 03f0.8: enabled 1
PNP: 03f0.9: enabled 1
PNP: 03f0.a: enabled 1
PCI: 00:04.1: enabled 1
PCI: 00:04.2: enabled 1
PCI: 00:04.3: enabled 1
Compare with tree...
Root Device: enabled 1
APIC_CLUSTER: 0: enabled 1
APIC: 00: enabled 1
PCI_DOMAIN: 0000: enabled 1
PCI: 00:00.0: enabled 1
PCI: 00:01.0: enabled 1
PCI: 00:04.0: enabled 1
PNP: 03f0.0: enabled 1
PNP: 03f0.1: enabled 1
PNP: 03f0.2: enabled 1
PNP: 03f0.3: enabled 1
PNP: 03f0.5: enabled 1
PNP: 03f0.7: enabled 1
PNP: 03f0.8: enabled 1
PNP: 03f0.9: enabled 1
PNP: 03f0.a: enabled 1
PCI: 00:04.1: enabled 1
PCI: 00:04.2: enabled 1
PCI: 00:04.3: enabled 1
scan_static_bus for Root Device
APIC_CLUSTER: 0 enabled
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/7190] ops
PCI: 00:00.0 [8086/7190] enabled
PCI: 00:01.0 [8086/7191] enabled
PCI: Static device PCI: 00:04.0 not found, disabling it.
PCI: Static device PCI: 00:04.1 not found, disabling it.
PCI: Static device PCI: 00:04.2 not found, disabling it.
PCI: Static device PCI: 00:04.3 not found, disabling it.
malloc Enter, size 68, free_mem_ptr 00130000
malloc 00130000
PCI: 00:07.0 [8086/7110] bus ops
PCI: 00:07.0 [8086/7110] enabled
malloc Enter, size 68, free_mem_ptr 00130044
malloc 00130044
PCI: 00:07.1 [8086/7111] ops
PCI: 00:07.1 [8086/7111] enabled
malloc Enter, size 68, free_mem_ptr 00130088
malloc 00130088
PCI: 00:07.2 [8086/7112] ops
PCI: 00:07.2 [8086/7112] enabled
malloc Enter, size 68, free_mem_ptr 001300cc
malloc 001300cc
PCI: 00:07.3 [8086/7113] bus ops
PCI: 00:07.3 [8086/7113] enabled
malloc Enter, size 68, free_mem_ptr 00130110
malloc 00130110
PCI: 00:0b.0 [1102/0002] enabled
malloc Enter, size 68, free_mem_ptr 00130154
malloc 00130154
PCI: 00:0b.1 [1102/7002] enabled
malloc Enter, size 68, free_mem_ptr 00130198
malloc 00130198
PCI: 00:0d.0 [8086/1229] enabled
malloc Enter, size 68, free_mem_ptr 001301dc
malloc 001301dc
PCI: 00:0f.0 [105a/4d30] enabled
do_pci_scan_bridge for PCI: 00:01.0
malloc Enter, size 24, free_mem_ptr 00130220
malloc 00130220
PCI: pci_scan_bus for bus 01
malloc Enter, size 68, free_mem_ptr 00130238
malloc 00130238
PCI: 01:00.0 [10de/0253] enabled
PCI: pci_scan_bus returning with max=001
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:07.0
scan_static_bus for PCI: 00:07.0 done
scan_static_bus for PCI: 00:07.3
scan_static_bus for PCI: 00:07.3 done
PCI: pci_scan_bus returning with max=001
scan_static_bus for Root Device done
done
Setting up VGA for PCI: 01:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:01.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
Root Device read_resources bus 0 link: 0
APIC_CLUSTER: 0 read_resources bus 0 link: 0
APIC: 00 missing read_resources
APIC_CLUSTER: 0 read_resources bus 0 link: 0 done
malloc Enter, size 2560, free_mem_ptr 0013027c
malloc 0013027c
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
Done reading resources.
Show resources in subtree (Root Device)...After reading.
Root Device child on link 0 APIC_CLUSTER: 0
APIC_CLUSTER: 0 child on link 0 APIC: 00
APIC: 00
PCI_DOMAIN: 0000 child on link 0 PCI: 00:00.0
PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffff flags 40040100 index 10000000
PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffffffff flags 40040200 index 10000100
PCI: 00:00.0
PCI: 00:00.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10
PCI: 00:01.0 child on link 0 PCI: 01:00.0
PCI: 00:01.0 resource base 0 size 0 align 12 gran 12 limit ffff flags 80102 index 1c
PCI: 00:01.0 resource base 0 size 0 align 20 gran 20 limit ffffffff flags 81202 index 24
PCI: 00:01.0 resource base 0 size 0 align 20 gran 20 limit ffffffff flags 80202 index 20
PCI: 01:00.0
PCI: 01:00.0 resource base 0 size 1000000 align 24 gran 24 limit ffffffff flags 200 index 10
PCI: 01:00.0 resource base 0 size 8000000 align 27 gran 27 limit ffffffff flags 1200 index 14
PCI: 01:00.0 resource base 0 size 80000 align 19 gran 19 limit ffffffff flags 1200 index 18
PCI: 01:00.0 resource base 0 size 20000 align 17 gran 17 limit ffffffff flags 2200 index 30
PCI: 00:04.0 child on link 0 PNP: 03f0.0
PNP: 03f0.0
PNP: 03f0.0 resource base 3f0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.0 resource base 6 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.0 resource base 2 size 0 align 0 gran 0 limit 0 flags c0000800 index 74
PNP: 03f0.1
PNP: 03f0.1 resource base 378 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.1 resource base 7 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.2
PNP: 03f0.2 resource base 3f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.2 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.3
PNP: 03f0.3 resource base 2f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.3 resource base 3 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.5
PNP: 03f0.5 resource base 60 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.5 resource base 64 size 0 align 0 gran 0 limit 0 flags c0000100 index 62
PNP: 03f0.5 resource base 1 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.5 resource base c size 0 align 0 gran 0 limit 0 flags c0000400 index 72
PNP: 03f0.7
PNP: 03f0.8
PNP: 03f0.9
PNP: 03f0.a
PCI: 00:04.1
PCI: 00:04.2
PCI: 00:04.3
PCI: 00:07.0
PCI: 00:07.0 resource base 0 size 1000 align 0 gran 0 limit ffff flags c0000100 index 1
PCI: 00:07.0 resource base ff800000 size 800000 align 0 gran 0 limit 0 flags d0000200 index 2
PCI: 00:07.1
PCI: 00:07.1 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20
PCI: 00:07.2
PCI: 00:07.2 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20
PCI: 00:07.3
PCI: 00:07.3 resource base e400 size 40 align 0 gran 0 limit ffff flags d0000100 index 1
PCI: 00:07.3 resource base f00 size 10 align 0 gran 0 limit ffff flags d0000100 index 2
PCI: 00:0b.0
PCI: 00:0b.0 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 10
PCI: 00:0b.1
PCI: 00:0b.1 resource base 0 size 8 align 3 gran 3 limit ffff flags 100 index 10
PCI: 00:0d.0
PCI: 00:0d.0 resource base 0 size 1000 align 12 gran 12 limit ffffffff flags 200 index 10
PCI: 00:0d.0 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 14
PCI: 00:0d.0 resource base 0 size 100000 align 20 gran 20 limit ffffffff flags 200 index 18
PCI: 00:0d.0 resource base 0 size 100000 align 20 gran 20 limit ffffffff flags 2200 index 30
PCI: 00:0f.0
PCI: 00:0f.0 resource base 0 size 8 align 3 gran 3 limit ffff flags 100 index 10
PCI: 00:0f.0 resource base 0 size 4 align 2 gran 2 limit ffff flags 100 index 14
PCI: 00:0f.0 resource base 0 size 8 align 3 gran 3 limit ffff flags 100 index 18
PCI: 00:0f.0 resource base 0 size 4 align 2 gran 2 limit ffff flags 100 index 1c
PCI: 00:0f.0 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 20
PCI: 00:0f.0 resource base 0 size 20000 align 17 gran 17 limit ffffffff flags 200 index 24
PCI: 00:0f.0 resource base 0 size 10000 align 16 gran 16 limit ffffffff flags 2200 index 30
PCI_DOMAIN: 0000 compute_resources_io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
PCI: 00:01.0 compute_resources_io: base: 0 size: 0 align: 12 gran: 12 limit: ffff
PCI: 00:01.0 compute_resources_io: base: 0 size: 0 align: 12 gran: 12 limit: ffff done
PCI: 00:0d.0 14 * [0x0 - 0x3f] io
PCI: 00:0f.0 20 * [0x40 - 0x7f] io
PCI: 00:07.2 20 * [0x80 - 0x9f] io
PCI: 00:0b.0 10 * [0xa0 - 0xbf] io
PCI: 00:07.1 20 * [0xc0 - 0xcf] io
PCI: 00:0b.1 10 * [0xd0 - 0xd7] io
PCI: 00:0f.0 10 * [0xd8 - 0xdf] io
PCI: 00:0f.0 18 * [0xe0 - 0xe7] io
PCI: 00:0f.0 14 * [0xe8 - 0xeb] io
PCI: 00:0f.0 1c * [0xec - 0xef] io
PCI_DOMAIN: 0000 compute_resources_io: base: f0 size: f0 align: 6 gran: 0 limit: ffff done
PCI_DOMAIN: 0000 compute_resources_mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffff
PCI: 00:01.0 compute_resources_prefmem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff
PCI: 01:00.0 14 * [0x0 - 0x7ffffff] prefmem
PCI: 01:00.0 18 * [0x8000000 - 0x807ffff] prefmem
PCI: 00:01.0 compute_resources_prefmem: base: 8080000 size: 8100000 align: 27 gran: 20 limit: ffffffff done
PCI: 00:01.0 compute_resources_mem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff
PCI: 01:00.0 10 * [0x0 - 0xffffff] mem
PCI: 01:00.0 30 * [0x1000000 - 0x101ffff] mem
PCI: 00:01.0 compute_resources_mem: base: 1020000 size: 1100000 align: 24 gran: 20 limit: ffffffff done
PCI: 00:01.0 24 * [0x0 - 0x80fffff] prefmem
PCI: 00:00.0 10 * [0xc000000 - 0xfffffff] prefmem
PCI: 00:01.0 20 * [0x10000000 - 0x110fffff] mem
PCI: 00:0d.0 18 * [0x11100000 - 0x111fffff] mem
PCI: 00:0d.0 30 * [0x11200000 - 0x112fffff] mem
PCI: 00:0f.0 24 * [0x11300000 - 0x1131ffff] mem
PCI: 00:0f.0 30 * [0x11320000 - 0x1132ffff] mem
PCI: 00:0d.0 10 * [0x11330000 - 0x11330fff] mem
PCI_DOMAIN: 0000 compute_resources_mem: base: 11331000 size: 11331000 align: 27 gran: 0 limit: ffffffff done
avoid_fixed_resources: PCI_DOMAIN: 0000
avoid_fixed_resources:@PCI_DOMAIN: 0000 10000000 limit 0000ffff
avoid_fixed_resources:@PCI_DOMAIN: 0000 10000100 limit ffffffff
constrain_resources: PCI_DOMAIN: 0000
constrain_resources: PCI: 00:00.0
constrain_resources: PCI: 00:01.0
constrain_resources: PCI: 01:00.0
constrain_resources: PCI: 00:07.0
constrain_resources: PCI: 00:07.1
constrain_resources: PCI: 00:07.2
constrain_resources: PCI: 00:07.3
constrain_resources: PCI: 00:0b.0
constrain_resources: PCI: 00:0b.1
constrain_resources: PCI: 00:0d.0
constrain_resources: PCI: 00:0f.0
avoid_fixed_resources2: PCI_DOMAIN: 0000 at 10000000 limit 0000ffff
lim->base 00001000 lim->limit 0000e3ff
avoid_fixed_resources2: PCI_DOMAIN: 0000 at 10000100 limit ffffffff
lim->base 00000000 lim->limit ff7fffff
Setting resources...
PCI_DOMAIN: 0000 allocate_resources_io: base:1000 size:f0 align:6 gran:0 limit:e3ff
Assigned: PCI: 00:0d.0 14 * [0x1000 - 0x103f] io
Assigned: PCI: 00:0f.0 20 * [0x1040 - 0x107f] io
Assigned: PCI: 00:07.2 20 * [0x1080 - 0x109f] io
Assigned: PCI: 00:0b.0 10 * [0x10a0 - 0x10bf] io
Assigned: PCI: 00:07.1 20 * [0x10c0 - 0x10cf] io
Assigned: PCI: 00:0b.1 10 * [0x10d0 - 0x10d7] io
Assigned: PCI: 00:0f.0 10 * [0x10d8 - 0x10df] io
Assigned: PCI: 00:0f.0 18 * [0x10e0 - 0x10e7] io
Assigned: PCI: 00:0f.0 14 * [0x10e8 - 0x10eb] io
Assigned: PCI: 00:0f.0 1c * [0x10ec - 0x10ef] io
PCI_DOMAIN: 0000 allocate_resources_io: next_base: 10f0 size: f0 align: 6 gran: 0 done
PCI: 00:01.0 allocate_resources_io: base:e3ff size:0 align:12 gran:12 limit:e3ff
PCI: 00:01.0 allocate_resources_io: next_base: e3ff size: 0 align: 12 gran: 12 done
PCI_DOMAIN: 0000 allocate_resources_mem: base:e8000000 size:11331000 align:27 gran:0 limit:ff7fffff
Assigned: PCI: 00:01.0 24 * [0xe8000000 - 0xf00fffff] prefmem
Assigned: PCI: 00:00.0 10 * [0xf4000000 - 0xf7ffffff] prefmem
Assigned: PCI: 00:01.0 20 * [0xf8000000 - 0xf90fffff] mem
Assigned: PCI: 00:0d.0 18 * [0xf9100000 - 0xf91fffff] mem
Assigned: PCI: 00:0d.0 30 * [0xf9200000 - 0xf92fffff] mem
Assigned: PCI: 00:0f.0 24 * [0xf9300000 - 0xf931ffff] mem
Assigned: PCI: 00:0f.0 30 * [0xf9320000 - 0xf932ffff] mem
Assigned: PCI: 00:0d.0 10 * [0xf9330000 - 0xf9330fff] mem
PCI_DOMAIN: 0000 allocate_resources_mem: next_base: f9331000 size: 11331000 align: 27 gran: 0 done
PCI: 00:01.0 allocate_resources_prefmem: base:e8000000 size:8100000 align:27 gran:20 limit:ff7fffff
Assigned: PCI: 01:00.0 14 * [0xe8000000 - 0xefffffff] prefmem
Assigned: PCI: 01:00.0 18 * [0xf0000000 - 0xf007ffff] prefmem
PCI: 00:01.0 allocate_resources_prefmem: next_base: f0080000 size: 8100000 align: 27 gran: 20 done
PCI: 00:01.0 allocate_resources_mem: base:f8000000 size:1100000 align:24 gran:20 limit:ff7fffff
Assigned: PCI: 01:00.0 10 * [0xf8000000 - 0xf8ffffff] mem
Assigned: PCI: 01:00.0 30 * [0xf9000000 - 0xf901ffff] mem
PCI: 00:01.0 allocate_resources_mem: next_base: f9020000 size: 1100000 align: 24 gran: 20 done
Root Device assign_resources, bus 0 link: 0
Setting RAM size to 384 MB
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:00.0 10 <- [0x00f4000000 - 0x00f7ffffff] size 0x04000000 gran 0x1a prefmem
PCI: 00:01.0 1c <- [0x000000e3ff - 0x000000e3fe] size 0x00000000 gran 0x0c bus 01 io
PCI: 00:01.0 24 <- [0x00e8000000 - 0x00f00fffff] size 0x08100000 gran 0x14 bus 01 prefmem
PCI: 00:01.0 20 <- [0x00f8000000 - 0x00f90fffff] size 0x01100000 gran 0x14 bus 01 mem
PCI: 00:01.0 assign_resources, bus 1 link: 0
PCI: 01:00.0 10 <- [0x00f8000000 - 0x00f8ffffff] size 0x01000000 gran 0x18 mem
PCI: 01:00.0 14 <- [0x00e8000000 - 0x00efffffff] size 0x08000000 gran 0x1b prefmem
PCI: 01:00.0 18 <- [0x00f0000000 - 0x00f007ffff] size 0x00080000 gran 0x13 prefmem
PCI: 01:00.0 30 <- [0x00f9000000 - 0x00f901ffff] size 0x00020000 gran 0x11 romem
PCI: 00:01.0 assign_resources, bus 1 link: 0
PCI: 00:07.1 20 <- [0x00000010c0 - 0x00000010cf] size 0x00000010 gran 0x04 io
PCI: 00:07.2 20 <- [0x0000001080 - 0x000000109f] size 0x00000020 gran 0x05 io
PCI: 00:0b.0 10 <- [0x00000010a0 - 0x00000010bf] size 0x00000020 gran 0x05 io
PCI: 00:0b.1 10 <- [0x00000010d0 - 0x00000010d7] size 0x00000008 gran 0x03 io
PCI: 00:0d.0 10 <- [0x00f9330000 - 0x00f9330fff] size 0x00001000 gran 0x0c mem
PCI: 00:0d.0 14 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io
PCI: 00:0d.0 18 <- [0x00f9100000 - 0x00f91fffff] size 0x00100000 gran 0x14 mem
PCI: 00:0d.0 30 <- [0x00f9200000 - 0x00f92fffff] size 0x00100000 gran 0x14 romem
PCI: 00:0f.0 10 <- [0x00000010d8 - 0x00000010df] size 0x00000008 gran 0x03 io
PCI: 00:0f.0 14 <- [0x00000010e8 - 0x00000010eb] size 0x00000004 gran 0x02 io
PCI: 00:0f.0 18 <- [0x00000010e0 - 0x00000010e7] size 0x00000008 gran 0x03 io
PCI: 00:0f.0 1c <- [0x00000010ec - 0x00000010ef] size 0x00000004 gran 0x02 io
PCI: 00:0f.0 20 <- [0x0000001040 - 0x000000107f] size 0x00000040 gran 0x06 io
PCI: 00:0f.0 24 <- [0x00f9300000 - 0x00f931ffff] size 0x00020000 gran 0x11 mem
PCI: 00:0f.0 30 <- [0x00f9320000 - 0x00f932ffff] size 0x00010000 gran 0x10 romem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Show resources in subtree (Root Device)...After assigning values.
Root Device child on link 0 APIC_CLUSTER: 0
APIC_CLUSTER: 0 child on link 0 APIC: 00
APIC: 00
PCI_DOMAIN: 0000 child on link 0 PCI: 00:00.0
PCI_DOMAIN: 0000 resource base 1000 size f0 align 6 gran 0 limit e3ff flags 40040100 index 10000000
PCI_DOMAIN: 0000 resource base e8000000 size 11331000 align 27 gran 0 limit ff7fffff flags 40040200 index 10000100
PCI_DOMAIN: 0000 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index a
PCI_DOMAIN: 0000 resource base c0000 size 17f40000 align 0 gran 0 limit 0 flags e0004200 index b
PCI: 00:00.0
PCI: 00:00.0 resource base f4000000 size 4000000 align 26 gran 26 limit ff7fffff flags 60001200 index 10
PCI: 00:01.0 child on link 0 PCI: 01:00.0
PCI: 00:01.0 resource base e3ff size 0 align 12 gran 12 limit e3ff flags 60080102 index 1c
PCI: 00:01.0 resource base e8000000 size 8100000 align 27 gran 20 limit ff7fffff flags 60081202 index 24
PCI: 00:01.0 resource base f8000000 size 1100000 align 24 gran 20 limit ff7fffff flags 60080202 index 20
PCI: 01:00.0
PCI: 01:00.0 resource base f8000000 size 1000000 align 24 gran 24 limit ff7fffff flags 60000200 index 10
PCI: 01:00.0 resource base e8000000 size 8000000 align 27 gran 27 limit ff7fffff flags 60001200 index 14
PCI: 01:00.0 resource base f0000000 size 80000 align 19 gran 19 limit ff7fffff flags 60001200 index 18
PCI: 01:00.0 resource base f9000000 size 20000 align 17 gran 17 limit ff7fffff flags 60002200 index 30
PCI: 00:04.0 child on link 0 PNP: 03f0.0
PNP: 03f0.0
PNP: 03f0.0 resource base 3f0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.0 resource base 6 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.0 resource base 2 size 0 align 0 gran 0 limit 0 flags c0000800 index 74
PNP: 03f0.1
PNP: 03f0.1 resource base 378 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.1 resource base 7 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.2
PNP: 03f0.2 resource base 3f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.2 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.3
PNP: 03f0.3 resource base 2f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.3 resource base 3 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.5
PNP: 03f0.5 resource base 60 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 03f0.5 resource base 64 size 0 align 0 gran 0 limit 0 flags c0000100 index 62
PNP: 03f0.5 resource base 1 size 0 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 03f0.5 resource base c size 0 align 0 gran 0 limit 0 flags c0000400 index 72
PNP: 03f0.7
PNP: 03f0.8
PNP: 03f0.9
PNP: 03f0.a
PCI: 00:04.1
PCI: 00:04.2
PCI: 00:04.3
PCI: 00:07.0
PCI: 00:07.0 resource base 0 size 1000 align 0 gran 0 limit ffff flags c0000100 index 1
PCI: 00:07.0 resource base ff800000 size 800000 align 0 gran 0 limit 0 flags d0000200 index 2
PCI: 00:07.1
PCI: 00:07.1 resource base 10c0 size 10 align 4 gran 4 limit e3ff flags 60000100 index 20
PCI: 00:07.2
PCI: 00:07.2 resource base 1080 size 20 align 5 gran 5 limit e3ff flags 60000100 index 20
PCI: 00:07.3
PCI: 00:07.3 resource base e400 size 40 align 0 gran 0 limit ffff flags d0000100 index 1
PCI: 00:07.3 resource base f00 size 10 align 0 gran 0 limit ffff flags d0000100 index 2
PCI: 00:0b.0
PCI: 00:0b.0 resource base 10a0 size 20 align 5 gran 5 limit e3ff flags 60000100 index 10
PCI: 00:0b.1
PCI: 00:0b.1 resource base 10d0 size 8 align 3 gran 3 limit e3ff flags 60000100 index 10
PCI: 00:0d.0
PCI: 00:0d.0 resource base f9330000 size 1000 align 12 gran 12 limit ff7fffff flags 60000200 index 10
PCI: 00:0d.0 resource base 1000 size 40 align 6 gran 6 limit e3ff flags 60000100 index 14
PCI: 00:0d.0 resource base f9100000 size 100000 align 20 gran 20 limit ff7fffff flags 60000200 index 18
PCI: 00:0d.0 resource base f9200000 size 100000 align 20 gran 20 limit ff7fffff flags 60002200 index 30
PCI: 00:0f.0
PCI: 00:0f.0 resource base 10d8 size 8 align 3 gran 3 limit e3ff flags 60000100 index 10
PCI: 00:0f.0 resource base 10e8 size 4 align 2 gran 2 limit e3ff flags 60000100 index 14
PCI: 00:0f.0 resource base 10e0 size 8 align 3 gran 3 limit e3ff flags 60000100 index 18
PCI: 00:0f.0 resource base 10ec size 4 align 2 gran 2 limit e3ff flags 60000100 index 1c
PCI: 00:0f.0 resource base 1040 size 40 align 6 gran 6 limit e3ff flags 60000100 index 20
PCI: 00:0f.0 resource base f9300000 size 20000 align 17 gran 17 limit ff7fffff flags 60000200 index 24
PCI: 00:0f.0 resource base f9320000 size 10000 align 16 gran 16 limit ff7fffff flags 60002200 index 30
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 06
PCI: 00:01.0 bridge ctrl <- 008b
PCI: 00:01.0 cmd <- 107
PCI: 00:07.0 cmd <- 0f
PCI: 00:07.1 cmd <- 05
PCI: 00:07.2 cmd <- 05
PCI: 00:07.3 cmd <- 03
PCI: 00:0b.0 cmd <- 05
PCI: 00:0b.1 cmd <- 05
PCI: 00:0d.0 cmd <- 07
PCI: 00:0f.0 cmd <- 07
PCI: 01:00.0 cmd <- 07
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
malloc Enter, size 68, free_mem_ptr 00130c7c
malloc 00130c7c
Initializing CPU #0
CPU: vendor Intel device 673
CPU: family 06, model 07, stepping 03
microcode_info: sig = 0x00000673 pf=0x00000001 rev = 0x0000000e
microcode updated to revision: 0000000e from revision 0000000e
Enabling cache
Setting fixed MTRRs(0-88) Type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base: 0MB, range: 256MB, type WB
ADDRESS_MASK_HIGH=0xf
Setting variable MTRR 1, base: 256MB, range: 128MB, type WB
ADDRESS_MASK_HIGH=0xf
Zero-sized MTRR range @0KB
DONE variable MTRRs
Clear out the extra MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Disabling local apic...done.
CPU #0 initialized
PCI: 00:00.0 init
Northbridge Init
PCI: 00:07.0 init
RTC Init
PCI: 00:07.1 init
IDE: Primary IDE interface: on
IDE: Secondary IDE interface: off
IDE: Access to legacy IDE ports: on
IDE: Primary IDE interface, drive 0: UDMA/33: on
IDE: Primary IDE interface, drive 1: UDMA/33: off
PCI: 00:07.2 init
PCI: 00:0b.0 init
PCI: 00:0b.1 init
PCI: 00:0d.0 init
PCI: 00:0f.0 init
PCI: 01:00.0 init
Check CBFS header at fffffc9e
magic is 4f524243
Found CBFS header at fffffc9e
Check fallback/romstage
CBFS: follow chain: fffc0000 + 38 + 3436 + align -> fffc3480
Check fallback/coreboot_ram
CBFS: follow chain: fffc3480 + 38 + 1528a + align -> fffd8780
Check fallback/payload
CBFS: follow chain: fffd8780 + 38 + bd9b + align -> fffe4580
Check
CBFS: follow chain: fffe4580 + 28 + 1b6f6 + align -> fffffcc0
CBFS: Could not find file pci10de,0253.rom
On card, ROM address for PCI: 01:00.0 = f9000000
PCI expansion ROM, signature 0xaa55, INIT size 0xf000, data ptr 0x0104
PCI ROM image, vendor ID 10de, device ID 0253,
PCI ROM image, Class Code 030000, Code Type 00
Copying VGA ROM Image from f9000000 to 0xc0000, 0xf000 bytes
Real mode stub @00000600: 606 bytes
Calling Option ROM...
Oops, exception 8 while executing option rom
... Option ROM returned.
Devices initialized
Show all devs...After init.
Root Device: enabled 1
APIC_CLUSTER: 0: enabled 1
APIC: 00: enabled 1
PCI_DOMAIN: 0000: enabled 1
PCI: 00:00.0: enabled 1
PCI: 00:01.0: enabled 1
PCI: 00:04.0: enabled 0
PNP: 03f0.0: enabled 1
PNP: 03f0.1: enabled 1
PNP: 03f0.2: enabled 1
PNP: 03f0.3: enabled 1
PNP: 03f0.5: enabled 1
PNP: 03f0.7: enabled 1
PNP: 03f0.8: enabled 1
PNP: 03f0.9: enabled 1
PNP: 03f0.a: enabled 1
PCI: 00:04.1: enabled 0
PCI: 00:04.2: enabled 0
PCI: 00:04.3: enabled 0
PCI: 00:07.0: enabled 1
PCI: 00:07.1: enabled 1
PCI: 00:07.2: enabled 1
PCI: 00:07.3: enabled 1
PCI: 00:0b.0: enabled 1
PCI: 00:0b.1: enabled 1
PCI: 00:0d.0: enabled 1
PCI: 00:0f.0: enabled 1
PCI: 01:00.0: enabled 1
CPU: 00: enabled 1
Initializing CBMEM area to 0x17ff0000 (65536 bytes)
Adding CBMEM entry as no. 1
Moving GDT to 17ff0200...ok
High Tables Base is 17ff0000.
Copying Interrupt Routing Table to 0x000f0000... done.
Verifying copy of Interrupt Routing Table at 0x000f0000... done
Checking Interrupt Routing Table consistency...
check_pirq_routing_table(): Interrupt Routing Table located at 000f0000.
done.
Adding CBMEM entry as no. 2
Copying Interrupt Routing Table to 0x17ff0400... done.
Verifying copy of Interrupt Routing Table at 0x17ff0400... done
Checking Interrupt Routing Table consistency...
check_pirq_routing_table(): Interrupt Routing Table located at 17ff0400.
done.
PIRQ table: 128 bytes.
Adding CBMEM entry as no. 3
ACPI: Writing ACPI tables at 17ff1400...
ACPI: * FACS
ACPI: * DSDT @ 17ff1540 Length 61d
ACPI: * FADT
ACPI: added table 1/32, length now 40
ACPI: * MADT
ACPI: * SSDT
Found 1 CPU(s).
ACPI: added table 2/32, length now 44
ACPI: done.
ACPI tables: 2252 bytes.
Adding CBMEM entry as no. 4
Writing high table forward entry at 0x00000500
Wrote coreboot table at: 00000500 - 00000518 checksum 17df
New low_table_end: 0x00000518
Now going to write high coreboot table at 0x17ffd000
rom_table_end = 0x17ffd000
Adjust low_table_end from 0x00000518 to 0x00001000
Adjust rom_table_end from 0x17ffd000 to 0x18000000
Adding high table area
coreboot memory table:
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000009ffff: RAM
2. 00000000000c0000-0000000017feffff: RAM
3. 0000000017ff0000-0000000017ffffff: CONFIGURATION TABLES
4. 00000000ff800000-00000000ffffffff: RESERVED
Wrote coreboot table at: 17ffd000 - 17ffd1ac checksum 7b4e
coreboot table: 428 bytes.
Multiboot Information structure has been written.
0. FREE SPACE 17fff000 00001000
1. GDT 17ff0200 00000200
2. IRQ TABLE 17ff0400 00001000
3. ACPI 17ff1400 0000bc00
4. COREBOOT 17ffd000 00002000
Check CBFS header at fffffc9e
magic is 4f524243
Found CBFS header at fffffc9e
Check fallback/romstage
CBFS: follow chain: fffc0000 + 38 + 3436 + align -> fffc3480
Check fallback/coreboot_ram
CBFS: follow chain: fffc3480 + 38 + 1528a + align -> fffd8780
Check fallback/payload
Got a payload
Loading segment from rom address 0xfffd87b8
data (compression=1)
malloc Enter, size 36, free_mem_ptr 00130cc0
malloc 00130cc0
New segment dstaddr 0xe7c70 memsize 0x18390 srcaddr 0xfffd87f0 filesize 0xbd63
(cleaned up) New segment addr 0xe7c70 size 0x18390 offset 0xfffd87f0 filesize 0xbd63
Loading segment from rom address 0xfffd87d4
Entry Point 0x000fc1a9
Loading Segment: addr: 0x00000000000e7c70 memsz: 0x0000000000018390 filesz: 0x000000000000bd63
lb: [0x0000000000100000, 0x0000000000134000)
Post relocation: addr: 0x00000000000e7c70 memsz: 0x0000000000018390 filesz: 0x000000000000bd63
using LZMA
[ 0x000e7c70, 00100000, 0x00100000) <- fffd87f0
dest 000e7c70, end 00100000, bouncebuffer 17f88000
Loaded segments
Jumping to boot code at fc1a9
entry = 0x000fc1a9
lb_start = 0x00100000
lb_size = 0x00034000
adjust = 0x17ebc000
buffer = 0x17f88000
elf_boot_notes = 0x00125d08
adjusted_boot_notes = 0x17fe1d08
Start bios (version 0.6.1.2-20101231_004923-localhost1.local)
init ivt
init bda
Find memory size
Attempting to find coreboot table
Found coreboot table forwarder.
Now attempting to find coreboot memory map
Add to e820 map: 00000000 00001000 2
Add to e820 map: 00001000 0009f000 1
Add to e820 map: 000c0000 17f30000 1
Add to e820 map: 17ff0000 00010000 2
Add to e820 map: ff800000 00800000 2
Add to e820 map: 00000000 00004000 1
Found mainboard ASUS P2B
Found CBFS header at 0xfffffc9e
Add to e820 map: 000a0000 00050000 -1
Add to e820 map: 0009fc00 00000400 2
Add to e820 map: 000f0000 00010000 2
Ram Size=0x17ff0000 (0x0000000000000000 high)
malloc setup
Add to e820 map: 17fe0000 00010000 2
init pic
init timer
tsc calibrate start=3804264534 end=3805039121 diff=774587
CPU Mhz=451
math cp init
init boot device ordering
No apic - only the main cpu is present.
init bios32
init PMM
init PNPBIOS table
init keyboard
init mouse
Relocating coreboot bios tables
pmm_malloc zone=0x000f59b4 handle=ffffffff size=128 align=10 ret=0x000fdc70 (detail=0x17fdfee0)
Copying PIR from 0x17ff0400 to 0x000fdc70
pmm_malloc zone=0x000f59b4 handle=ffffffff size=20 align=10 ret=0x000fdc50 (detail=0x17fdfeb0)
Copying ACPI RSDP from 0x17ff1400 to 0x000fdc50
init SMBIOS tables
pmm_malloc zone=0x000f59bc handle=ffffffff size=32768 align=10 ret=0x17fd7e80 (detail=0x17fdfe80)
pmm_malloc zone=0x000f59b4 handle=ffffffff size=31 align=10 ret=0x000fdc30 (detail=0x17fd7e50)
pmm_malloc zone=0x000f59b0 handle=ffffffff size=263 align=10 ret=0x17fefef0 (detail=0x17fd7e20)
SMBIOS ptr=0x000fdc30 table=0x17fefef0
pmm_free 0x17fd7e80 (detail=0x17fdfe80)
Scan for VGA option rom
Attempting to init PCI bdf 01:00.0 (vd 10de:0253)
Searching CBFS for prefix pci10de,0253.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 01:00.0
Option rom sizing returned f9000001 fffe0000
Inspecting possible rom at 0xf9000000 (vd=10de:0253 bdf=01:00.0)
Copying option rom (size 61440) from 0xf9000000 to c0000
Checking rom 0x000c0000 (sig aa55 size 120)
Running option rom at c000:0003
Searching CBFS for prefix vgaroms/
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Turning on vga text mode console
SeaBIOS (version 0.6.1.2-20101231_004923-localhost1.local)
init usb
pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfe60 (detail=0x17fdfe80)
UHCI init on dev 00:07.2 (io=1080)
pmm_malloc zone=0x000f59bc handle=ffffffff size=4096 align=1000 ret=0x17fde000 (detail=0x17fdfe30)
/17fde000\ Start thread
|17fde000| pmm_malloc zone=0x000f59b0 handle=ffffffff size=16 align=10 ret=0x17fefee0 (detail=0x17fdfe00)
|17fde000| pmm_malloc zone=0x000f59b0 handle=ffffffff size=4096 align=1000 ret=0x17fee000 (detail=0x17fdfdd0)
|17fde000| pmm_malloc zone=0x000f59b0 handle=ffffffff size=8 align=10 ret=0x17fefed0 (detail=0x17fdfda0)
|17fde000| pmm_malloc zone=0x000f59b0 handle=ffffffff size=8 align=10 ret=0x17fefec0 (detail=0x17fdfd70)
|17fde000| pmm_malloc zone=0x000f59bc handle=ffffffff size=4096 align=1000 ret=0x17fdd000 (detail=0x17fdfd40)
/17fdd000\ Start thread
|17fde000| pmm_malloc zone=0x000f59bc handle=ffffffff size=4096 align=1000 ret=0x17fdc000 (detail=0x17fdfd10)
/17fdc000\ Start thread
init ps2port
pmm_malloc zone=0x000f59bc handle=ffffffff size=4096 align=1000 ret=0x17fdb000 (detail=0x17fdfce0)
/17fdb000\ Start thread
|17fdb000| i8042_flush
|17fdb000| i8042_command cmd=1aa
|17fdb000| i8042_wait_write
|17fdb000| i8042_wait_read
|17fdb000| i8042 param=55
|17fdb000| i8042_command cmd=1ab
|17fdb000| i8042_wait_write
|17fdb000| i8042_wait_read
|17fdb000| i8042 param=0
|17fdb000| ps2_command aux=0 cmd=2ff
|17fdb000| i8042 ctr old=30 new=30
|17fdb000| i8042_command cmd=1060
|17fdb000| i8042_wait_write
|17fdb000| i8042_wait_write
init lpt
Found 0 lpt ports
init serial
Found 3 serial ports
init hard drives
pmm_malloc zone=0x000f59b4 handle=ffffffff size=12 align=10 ret=0x000fdc20 (detail=0x17fdfcb0)
ATA controller 0 at 1f0/3f4/10c0 (irq 14 dev 39)
pmm_malloc zone=0x000f59bc handle=ffffffff size=4096 align=1000 ret=0x17fda000 (detail=0x17fdfc80)
/17fda000\ Start thread
|17fda000| powerup iobase=1f0 st=50
|17fda000| powerup iobase=1f0 st=50
|17fda000| ata_detect ata0-0: sc=55 sn=aa dh=a0
|17fda000| ata_reset drive=0x17fdaf94
pmm_malloc zone=0x000f59b4 handle=ffffffff size=12 align=10 ret=0x000fdc10 (detail=0x17fdfc50)
ATA controller 1 at 170/374/10c8 (irq 15 dev 39)
pmm_malloc zone=0x000f59bc handle=ffffffff size=4096 align=1000 ret=0x17fd9000 (detail=0x17fdfc20)
/17fd9000\ Start thread
|17fd9000| powerup IDE floating
|17fd9000| powerup IDE floating
|17fd9000| ata_detect ata1-0: sc=ff sn=ff dh=ff
|17fd9000| powerup IDE floating
|17fd9000| powerup IDE floating
|17fd9000| ata_detect ata1-1: sc=ff sn=ff dh=ff
pmm_free 0x17fd9000 (detail=0x17fdfc20)
\17fd9000/ End thread
|17fdd000| set_address 0x17fdfe60
|17fdd000| uhci_alloc_control_pipe 0x17fdfe60
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=28 align=10 ret=0x17fdfc00 (detail=0x17fdfc20)
|17fdb000| i8042_command cmd=1060
|17fdb000| i8042_wait_write
|17fdb000| i8042_wait_write
|17fdb000| ps2_sendbyte aux=0 cmd=ff
|17fdb000| i8042_kbd_write c=255
|17fdb000| i8042_wait_write
|17fda000| ata_reset exit status=50
|17fdd000| uhci_control 0x17fdfc0c
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfbb0 (detail=0x17fdfbd0)
|17fda000| send_cmd : read error (status=51 err=04)
|17fdd000| pmm_free 0x17fdfbb0 (detail=0x17fdfbd0)
|17fdd000| uhci_alloc_control_pipe 0x17fdfe60
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=28 align=10 ret=0x17fdfbb0 (detail=0x17fdfbd0)
|17fdd000| config_usb: 0x17fdfbbc
|17fdd000| uhci_control 0x17fdfbbc
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=48 align=10 ret=0x17fdfb50 (detail=0x17fdfb80)
|17fdc000| set_address 0x17fdfe60
|17fda000| pmm_malloc zone=0x000f59bc handle=ffffffff size=80 align=10 ret=0x17fdfad0 (detail=0x17fdfb20)
|17fda000| pmm_malloc zone=0x000f59b4 handle=ffffffff size=44 align=10 ret=0x000fdbe0 (detail=0x17fdfaa0)
|17fda000| ata0-0: WDC WD273BA ATA-4 Hard-Disk (26105 MiBytes)
|17fda000| drive 0x000fdbe0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=53464320
|17fda000| ata_detect resetresult=600b
|17fda000| powerup iobase=1f0 st=50
|17fda000| powerup iobase=1f0 st=0
|17fda000| ata_detect ata0-1: sc=55 sn=aa dh=b0
|17fda000| send_cmd : DRQ not set (status 00)
pmm_free 0x17fda000 (detail=0x17fdfc80)
\17fda000/ End thread
|17fdd000| pmm_free 0x17fdfb50 (detail=0x17fdfb80)
|17fdd000| device rev=0200 cls=00 sub=00 proto=00 size=08
|17fdd000| uhci_control 0x17fdfbbc
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=64 align=10 ret=0x17fdfb70 (detail=0x17fdfc80)
|17fdc000| uhci_control 0x17fdfc0c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfb50 (detail=0x17fdfa70)
|17fdd000| pmm_free 0x17fdfb70 (detail=0x17fdfc80)
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=34 align=10 ret=0x17fdfb80 (detail=0x17fdfc80)
|17fdd000| uhci_control 0x17fdfbbc
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=112 align=10 ret=0x17fdf9d0 (detail=0x17fdfa40)
|17fdc000| pmm_free 0x17fdfb50 (detail=0x17fdfa70)
|17fdb000| ps2 read fe
|17fdb000| Got ps2 nak (status=51)
|17fdb000| i8042_command cmd=1060
|17fdb000| i8042_wait_write
|17fdb000| i8042_wait_write
|17fdb000| ps2 command 2ff failed (aux=0)
pmm_free 0x17fdb000 (detail=0x17fdfce0)
\17fdb000/ End thread
|17fdd000| pmm_free 0x17fdf9d0 (detail=0x17fdfa40)
|17fdd000| uhci_control 0x17fdfbbc
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfb60 (detail=0x17fdfce0)
|17fdc000| uhci_alloc_control_pipe 0x17fdfe60
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=28 align=10 ret=0x17fdfa50 (detail=0x17fdfa70)
|17fdc000| config_usb: 0x17fdfa5c
|17fdc000| uhci_control 0x17fdfa5c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=48 align=10 ret=0x17fdf9f0 (detail=0x17fdfa20)
|17fdd000| pmm_free 0x17fdfb60 (detail=0x17fdfce0)
|17fdd000| usb_hid_init 0x17fdfbbc
|17fdd000| uhci_control 0x17fdfbbc
|17fdd000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfb60 (detail=0x17fdfce0)
|17fdc000| pmm_free 0x17fdf9f0 (detail=0x17fdfa20)
|17fdc000| device rev=0200 cls=00 sub=00 proto=00 size=08
|17fdc000| uhci_control 0x17fdfa5c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=64 align=10 ret=0x17fdf9e0 (detail=0x17fdfa20)
|17fdd000| pmm_free 0x17fdfb60 (detail=0x17fdfce0)
|17fdd000| uhci_alloc_intr_pipe 0x17fdfe60 3
|17fdd000| ebda moved from 9fc00 to 9f800
|17fdd000| pmm_malloc zone=0x000f59ac handle=ffffffff size=28 align=10 ret=0x0009ffe0 (detail=0x17fdfce0)
|17fdd000| pmm_malloc zone=0x000f59ac handle=ffffffff size=224 align=10 ret=0x0009ff00 (detail=0x17fdfb50)
|17fdd000| pmm_malloc zone=0x000f59ac handle=ffffffff size=84 align=10 ret=0x0009fea0 (detail=0x17fdf9b0)
|17fdd000| USB mouse initialized
|17fdd000| pmm_free 0x17fdfb80 (detail=0x17fdfc80)
|17fdd000| uhci_free_pipe 0x17fdfbbc
|17fdc000| pmm_free 0x17fdf9e0 (detail=0x17fdfa20)
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=59 align=10 ret=0x17fdfa10 (detail=0x17fdfc80)
|17fdc000| uhci_control 0x17fdfa5c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=160 align=10 ret=0x17fdf910 (detail=0x17fdfb80)
|17fdd000| pmm_free 0x17fdfbb0 (detail=0x17fdfbd0)
|17fdc000| pmm_free 0x17fdd000 (detail=0x17fdfd40)
\17fdd000/ End thread
|17fdc000| pmm_free 0x17fdf910 (detail=0x17fdfb80)
|17fdc000| uhci_control 0x17fdfa5c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfbe0 (detail=0x17fdfd40)
|17fdc000| pmm_free 0x17fdfbe0 (detail=0x17fdfd40)
|17fdc000| usb_hid_init 0x17fdfa5c
|17fdc000| uhci_control 0x17fdfa5c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfbe0 (detail=0x17fdfd40)
|17fdc000| pmm_free 0x17fdfbe0 (detail=0x17fdfd40)
|17fdc000| uhci_control 0x17fdfa5c
|17fdc000| pmm_malloc zone=0x000f59bc handle=ffffffff size=32 align=10 ret=0x17fdfbe0 (detail=0x17fdfd40)
|17fdc000| pmm_free 0x17fdfbe0 (detail=0x17fdfd40)
|17fdc000| uhci_alloc_intr_pipe 0x17fdfe60 3
|17fdc000| pmm_malloc zone=0x000f59ac handle=ffffffff size=28 align=10 ret=0x0009fe80 (detail=0x17fdfd40)
|17fdc000| pmm_malloc zone=0x000f59ac handle=ffffffff size=224 align=10 ret=0x0009fda0 (detail=0x17fdfbd0)
|17fdc000| pmm_malloc zone=0x000f59ac handle=ffffffff size=112 align=10 ret=0x0009fd30 (detail=0x17fdfba0)
|17fdc000| USB keyboard initialized
|17fdc000| pmm_free 0x17fdfa10 (detail=0x17fdfc80)
|17fdc000| uhci_free_pipe 0x17fdfa5c
|17fdc000| pmm_free 0x17fdfa50 (detail=0x17fdfa70)
|17fde000| pmm_free 0x17fdc000 (detail=0x17fdfd10)
\17fdc000/ End thread
|17fde000| uhci_free_pipe 0x17fdfc0c
|17fde000| pmm_free 0x17fdfc00 (detail=0x17fdfc20)
pmm_free 0x17fde000 (detail=0x17fdfe30)
\17fde000/ End thread
All threads complete.
Scan for option roms
Attempting to init PCI bdf 00:00.0 (vd 8086:7190)
Searching CBFS for prefix pci8086,7190.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:00.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:01.0 (vd 8086:7191)
Searching CBFS for prefix pci8086,7191.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:01.0
Skipping non-normal pci device (type=1)
Attempting to init PCI bdf 00:07.0 (vd 8086:7110)
Searching CBFS for prefix pci8086,7110.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:07.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:07.2 (vd 8086:7112)
Searching CBFS for prefix pci8086,7112.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:07.2
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:07.3 (vd 8086:7113)
Searching CBFS for prefix pci8086,7113.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:07.3
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0b.0 (vd 1102:0002)
Searching CBFS for prefix pci1102,0002.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:0b.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0b.1 (vd 1102:7002)
Searching CBFS for prefix pci1102,7002.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:0b.1
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0d.0 (vd 8086:1229)
Searching CBFS for prefix pci8086,1229.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:0d.0
Option rom sizing returned f9200000 fff00000
Inspecting possible rom at 0xf9200000 (vd=8086:1229 bdf=00:0d.0)
Copying option rom (size 10240) from 0xf9200000 to cf000
Checking rom 0x000cf000 (sig aa55 size 20)
Running option rom at cf00:0003
Attempting to init PCI bdf 00:0f.0 (vd 105a:4d30)
Searching CBFS for prefix pci105a,4d30.rom
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:0f.0
Option rom sizing returned f9320000 ffff0000
Inspecting possible rom at 0xf9320000 (vd=105a:4d30 bdf=00:0f.0)
Copying option rom (size 16384) from 0xf9320000 to d0000
Checking rom 0x000d0000 (sig aa55 size 32)
Running option rom at d000:0003
invalid handle_1ab102:58:
a=0000b102 b=00000078 c=00004d30 d=0000105a ds=9f00 es=f000 ss=0000
si=00000001 di=00000015 bp=00000000 sp=00006eba cs=d000 ip=29a6 f=0246
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
ps2 mouse irq but no mouse data.
Searching CBFS for prefix genroms/
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Checking rom 0x000cf000 (sig aa55 size 8)
Checking rom 0x000d0000 (sig aa55 size 20)
Press F12 for boot menu.
Checking for bootsplash
Searching CBFS for prefix bootsplash.jpg
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Select boot device:
1. ata0-0: WDC WD273BA ATA-4 Hard-Disk (26105 MiBytes)
2. ULTRA D0 WDC WD400BB-00AUA1
Searching CBFS for prefix img/
Found CBFS file fallback/romstage
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Mapping hd drive 0x000fdbe0 to 0
Running option rom at d000:1e69
finalize PMM
malloc finalize
Add to e820 map: 0009e800 00001800 2
Add to e820 map: 17fe0000 0000e000 1
Returned 57344 bytes of ZoneHigh
e820 map has 6 items:
0: 0000000000000000 - 000000000009e800 = 1
1: 000000000009e800 - 00000000000a0000 = 2
2: 00000000000f0000 - 0000000000100000 = 2
3: 0000000000100000 - 0000000017fee000 = 1
4: 0000000017fee000 - 0000000018000000 = 2
5: 00000000ff800000 - 0000000100000000 = 2
Jump to int19
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
ata_reset drive=0x0000dbe0
ata_reset exit status=50
enter handle_12:
a=00000000 b=00000000 c=00000000 d=00000080 ds=0000 es=0000 ss=0000
si=00002118 di=00004300 bp=00001ff0 sp=00001ff4 cs=0000 ip=24c1 f=0297
ata_reset drive=0x0000dbe0
ata_reset exit status=50
enter handle_12:
a=00000000 b=00000000 c=00000000 d=00022080 ds=0000 es=0000 ss=0000
si=00002118 di=00054004 bp=00001ff0 sp=00001ff4 cs=0000 ip=8a01 f=0297
invalid handle_legacy_disk:809:
a=00004100 b=000655aa c=00000000 d=00000082 ds=0000 es=0000 ss=0000
si=00067fb8 di=00000082 bp=00001ff0 sp=00001ff4 cs=0000 ip=88b5 f=0246
invalid handle_legacy_disk:809:
a=00000800 b=00067fb8 c=00000000 d=00000082 ds=0000 es=0000 ss=0000
si=00000000 di=00000082 bp=00001ff0 sp=00001ff4 cs=0000 ip=88e9 f=0246
unimplemented handle_15XX:338:
a=000000c0 b=00000000 c=00000000 d=00000082 ds=0000 es=0000 ss=0000
si=00067fb8 di=00000082 bp=00001ff0 sp=00001ff4 cs=0000 ip=8ab6 f=0246
invalid handle_legacy_disk:809:
a=00000000 b=00009000 c=00000000 d=00000000 ds=0000 es=0000 ss=0000
si=004decc0 di=0009a000 bp=00001ff0 sp=00001ff4 cs=0000 ip=82c5 f=0246
unimplemented handle_16XX:231:
a=00000305 b=00000000 c=00000000 d=00000000 ds=9000 es=9000 ss=9000
si=00000000 di=00000000 bp=00000000 sp=00008f44 cs=9000 ip=05ec f=0003
unimplemented handle_15XX:338:
a=0000e980 b=00000000 c=00000000 d=47534943 ds=9000 es=9000 ss=9000
si=00000000 di=00000000 bp=00000000 sp=00008f44 cs=9000 ip=05ec f=0003
Linux version 2.6.36-gentoo-r5 (root at localhost1.local) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #8 PREEMPT Thu Dec 30 14:51:39 AKST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017fee000 (usable)
BIOS-e820: 0000000017fee000 - 0000000018000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.4 present.
last_pfn = 0x17fee max_arch_pfn = 0x1000000
PAT not supported by CPU.
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009e800 (usable)
modified: 000000000009e800 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 0000000017fee000 (usable)
modified: 0000000017fee000 - 0000000018000000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-0000000017fee000
ACPI: RSDP 000fdc50 00014 (v00 CORE )
ACPI: RSDT 17ff1424 0002C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 17ff1b5d 000F4 (v01 CORE COREBOOT 00000000 CORE 0000002A)
ACPI: DSDT 17ff1540 0061D (v02 CORE COREBOOT 00000001 INTL 20090123)
ACPI: FACS 17ff1500 00040
ACPI: SSDT 17ff1c51 0007B (v02 CORE DYNADATA 0000002A CORE 0000002A)
383MB LOWMEM available.
mapped low ram: 0 - 17fee000
low ram: 0 - 17fee000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00017fee
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x00017fee
Using APIC driver default
ACPI: PM-Timer IO Port: 0xe408
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 18000000 (gap: 18000000:e7800000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97404
Kernel command line: root=/dev/sda2 nosmp irqpoll resume2=swap:/dev/sda1 nmi_watchdog=0 usbhid.mousepoll=2 console=ttyS0,115200n8 console=tty0 video=uvesafb:1280x1024-16 at 60,mtrr:3,ywrap gentoo=nox 4
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (23 early reservations)
#0 [0001000000 - 0001824b9c] TEXT DATA BSS
#1 [000009e800 - 0000100000] BIOS reserved
#2 [0001825000 - 0001833049] BRK
#3 [0000010000 - 0000014000] ACPI WAKEUP
#4 [0000014000 - 0000015000] PGTABLE
#5 [0001833060 - 0001b33060] BOOTMEM
#6 [0001824ba0 - 0001824ba4] BOOTMEM
#7 [0001824bc0 - 0001824c40] BOOTMEM
#8 [0001824c40 - 0001824c64] BOOTMEM
#9 [0001b33060 - 0001b34060] BOOTMEM
#10 [0001824c80 - 0001824d7c] BOOTMEM
#11 [0001824d80 - 0001824dc0] BOOTMEM
#12 [0001824dc0 - 0001824e00] BOOTMEM
#13 [0001824e00 - 0001824e40] BOOTMEM
#14 [0001824e40 - 0001824e80] BOOTMEM
#15 [0001824e80 - 0001824ec0] BOOTMEM
#16 [0001824ec0 - 0001824f00] BOOTMEM
#17 [0001824f00 - 0001824f10] BOOTMEM
#18 [0001824f20 - 0001824fd2] BOOTMEM
#19 [0001b34060 - 0001b34112] BOOTMEM
#20 [0001b34120 - 0001b36120] BOOTMEM
#21 [0001b36120 - 0001b76120] BOOTMEM
#22 [0001b76120 - 0001b96120] BOOTMEM
Memory: 380800k/393144k available (5698k kernel code, 11888k reserved, 1885k data, 400k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
vmalloc : 0xd87ee000 - 0xfffa1000 ( 631 MB)
lowmem : 0xc0000000 - 0xd7fee000 ( 383 MB)
.init : 0xc1768000 - 0xc17cc000 ( 400 kB)
.data : 0xc1590864 - 0xc1767e8c (1885 kB)
.text : 0xc1000000 - 0xc1590864 (5698 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 450.996 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 901.99 BogoMIPS (lpj=450996)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
Performance Events:
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
CPU: Intel Pentium III (Katmai) stepping 03
ACPI: Core revision 20100702
ACPI: setting ELCR to 0200 (from 1aa0)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:07.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB
pci 0000:00:01.0: PCI bridge to [bus 01-01]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *15, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12) *15, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12) *15, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12) *15, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
ERROR: Unable to locate IOAPIC for GSI 1
ERROR: Unable to locate IOAPIC for GSI 12
ERROR: Unable to locate IOAPIC for GSI 6
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
system 00:04: [io 0xe400-0xe43f] has been reserved
system 00:04: [io 0x0f00-0x0f0f] has been reserved
system 00:04: [mem 0xff800000-0xffffffff] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf00fffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
fuse init (API version 7.15)
msgmni has been set to 743
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNKA] BIOS reported IRQ 15, using IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] nouveau 0000:01:00.0: Detected an NV20 generation card (0x025300a3)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BMP BIOS found
[drm] nouveau 0000:01:00.0: BMP version 5.21
[drm] nouveau 0000:01:00.0: Bios version 04.25.00.29
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02010110 000088b8
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02100202 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01000200 000088b8
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02100102 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 01120121 00000002
[drm] nouveau 0000:01:00.0: Raw DCB entry 5: 01120221 00000002
[drm] nouveau 0000:01:00.0: Merging DCB entries 1 and 3
[drm] nouveau 0000:01:00.0: Merging DCB entries 4 and 5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC608
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCA09
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC6FD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD029
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xC804
[drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[TTM] Zone kernel: Available graphics memory: 190400 kiB.
[TTM] Initializing pool allocator.
agpgart-intel 0000:00:00.0: AGP 1.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
nouveau 0000:01:00.0: putting AGP V2 device into 2x mode
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x48000, bo d7bcf000
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
loop: module loaded
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10c0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10c8 irq 15
pata_pdc202xx_old 0000:00:0f.0: can't derive routing for PCI INT A
pata_pdc202xx_old 0000:00:0f.0: PCI INT A: no GSI
scsi2 : pata_pdc202xx_old
scsi3 : pata_pdc202xx_old
ata3: PATA max UDMA/100 cmd 0x10d8 ctl 0x10e8 bmdma 0x1040
ata4: PATA max UDMA/100 cmd 0x10e0 ctl 0x10ec bmdma 0x1048
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:0d.0: can't derive routing for PCI INT A
e100 0000:00:0d.0: PCI INT A: no GSI
e100 0000:00:0d.0: eth0: addr 0xf9330000, irq 0, MAC addr 00:90:27:57:2c:80
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:07.2: can't derive routing for PCI INT D
uhci_hcd 0000:00:07.2: PCI INT D: no GSI
uhci_hcd 0000:00:07.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:07.2 setup!
uhci_hcd 0000:00:07.2: can't derive routing for PCI INT D
uhci_hcd 0000:00:07.2: init 0000:00:07.2 fail, -19
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
gameport gameport0: EMU10K1 is pci0000:00:0b.1/gameport0, io 0x10d0, speed 1217kHz
input: PC Speaker as /devices/platform/pcspkr/input/input1
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
i2c /dev entries driver
piix4_smbus 0000:00:07.3: SMBus Host Controller at 0xf00, revision 0
lirc_dev: IR Remote Control driver registered, major 253
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
w83781d: Found a W83781D chip at 0x290
ata1.00: ATA-4: WDC WD273BA, P78OA30A, max UDMA/66
ata1.00: 53464320 sectors, multi 16: LBA
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel at redhat.com
ata1.00: configured for UDMA/33
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 0:0:0:0: Direct-Access ATA WDC WD273BA P78O PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [LNKB] disabled and referenced, BIOS bug
sd 0:0:0:0: [sda] 53464320 512-byte logical blocks: (27.3 GB/25.4 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 15, using IRQ 10
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
EMU10K1_Audigy 0000:00:0b.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 1, comm: swapper Not tainted 2.6.36-gentoo-r5 #8
Call Trace:
[<c10637a4>] ? __report_bad_irq+0x24/0x90
[<c106395d>] ? note_interrupt+0x14d/0x190
[<c106430b>] ? handle_level_irq+0xdb/0x120
[<c1004985>] ? handle_irq+0x15/0x20
[<c100438a>] ? do_IRQ+0x3a/0xb0
[<c1003089>] ? common_interrupt+0x29/0x30
[<c1060000>] ? do_acct_process+0x390/0x5b0
[<c10326cd>] ? __do_softirq+0x3d/0xf0
[<c106388d>] ? note_interrupt+0x7d/0x190
[<c10327ad>] ? do_softirq+0x2d/0x40
[<c1032935>] ? irq_exit+0x35/0x40
[<c1004393>] ? do_IRQ+0x43/0xb0
[<c1003089>] ? common_interrupt+0x29/0x30
[<c1060000>] ? do_acct_process+0x390/0x5b0
[<c1062db6>] ? __setup_irq+0x166/0x340
[<c14a7cc0>] ? snd_emu10k1_interrupt+0x0/0x530
[<c1063050>] ? request_threaded_irq+0xc0/0x120
[<c15859f3>] ? snd_emu10k1_create+0x469/0x5ea
[<c146d223>] ? snd_card_create+0x163/0x2a0
[<c1585315>] ? snd_card_emu10k1_probe+0xe5/0x35a
[<c10ece46>] ? sysfs_do_create_link+0xc6/0x1e0
[<c1264aa1>] ? local_pci_probe+0x41/0xb0
[<c1265a69>] ? pci_device_probe+0x69/0x90
[<c1369aa5>] ? driver_probe_device+0x85/0x1a0
[<c10eca0a>] ? sysfs_create_dir+0x6a/0xb0
[<c1369c39>] ? __driver_attach+0x79/0x80
[<c1369bc0>] ? __driver_attach+0x0/0x80
[<c1369302>] ? bus_for_each_dev+0x52/0x80
[<c1369916>] ? driver_attach+0x16/0x20
[<c1369bc0>] ? __driver_attach+0x0/0x80
[<c1368bf2>] ? bus_add_driver+0xa2/0x240
[<c12648c0>] ? pci_device_shutdown+0x0/0x20
[<c12658f0>] ? pci_device_remove+0x0/0xf0
[<c1369ed3>] ? driver_register+0x63/0x120
[<c1494461>] ? snd_seq_device_register_driver+0xe1/0x130
[<c17681c0>] ? kernel_init+0x0/0x121
[<c1265cb6>] ? __pci_register_driver+0x36/0xa0
[<c17681c0>] ? kernel_init+0x0/0x121
[<c1001122>] ? do_one_initcall+0x32/0x170
[<c178fd90>] ? alsa_card_emu10k1_init+0x0/0x11
[<c17681c0>] ? kernel_init+0x0/0x121
[<c1768249>] ? kernel_init+0x89/0x121
[<c1003096>] ? kernel_thread_helper+0x6/0x10
handlers:
[<c14a7cc0>] (snd_emu10k1_interrupt+0x0/0x530)
Disabling IRQ #10
Clocksource tsc unstable (delta = 4687463671 ns)
ata3.00: qc timeout (cmd 0xf8)
sda: sda1 sda2 sda3
Switching to clocksource acpi_pm
ata3.00: failed to read native max address (err_mask=0x4)
sd 0:0:0:0: [sda] Attached SCSI disk
ata3.00: HPA support seems broken, skipping HPA handling
ALSA device list:
#0: SB Live! Value [CT4832] (rev.8, serial:0x80271102) at 0x10a0, irq 10
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (5950 buckets, 23800 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI Shortcut mode
ata3.00: ATA-5: WDC WD400BB-00AUA1, 18.20D18, max UDMA/100
ata3.00: 78165360 sectors, multi 16: LBA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD400BB-00AU 18.2 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3: lost interrupt (Status 0x50)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for UDMA/100
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x50)
ata3.00: limiting speed to UDMA/66:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for UDMA/66
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x50)
ata3.00: limiting speed to UDMA/33:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for UDMA/33
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x50)
ata3.00: limiting speed to PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO4
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: limiting speed to PIO3
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO3
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: limiting speed to PIO0
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
sd 2:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata3: lost interrupt (Status 0x58)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting link
ata3.00: configured for PIO0
ata3.00: device reported invalid CHS sector 0
sd 2:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sdb: unable to read partition table
ata3: EH complete
sdb: detected capacity change from 0 to 40020664320
sd 2:0:0:0: [sdb] Attached SCSI disk
EXT3-fs: barriers not enabled
EXT3-fs (sda2): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 400k freed
More information about the coreboot
mailing list