[coreboot] 440BX - DFI P2XBL - Which Target?

[Roger]

On Thu, Dec 30, 2010 at 10:45:39AM -0900, Roger wrote:
>>Here's what I got right now.
>>
>># lspci -xxxx
>>00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
>>(rev 03)
>>60: 10 10 18 20 30 30 30 30 00 23 40 f7 03 e0 00 00
>>c0: 00 00 00 00 00 00 00 00 18 0c ff ff 7f 00 00 00
>>
>>I'm going to go through my existing RAM combinations with what RAM sticks  I
>>have now.  I also think all of this ram is 100 and not 66.
>
>The previous was a mix of:
>128M, PC100 consisting of two single sided and one double sided.  Unknown which
>banks of order.  Let me know if you need 16x64 layout info, too.
>
>Here's another using only one bank of:
>DIMM0, 128M, PC100, Double Sided
>60: 08 10 10 10 10 10 10 10 00 0f c0 00 00 8a 00 00
>c0: 00 00 00 00 00 00 00 00 18 0c ff ff 67 00 00 00

And another, yanked the sticks from the Tyan:

DIMM 0-3, 256M, PC133, Double Sided
60: 10 20 30 40 50 60 60 60 00 3f e8 ff 0f ea 00 00
c0: 00 00 00 00 00 00 00 00 18 0c ff ff 7f 00 00 00


Please advise if you need more and of what combinations.  I'll probably buy
3*256M in the near future.