[coreboot] CoreBoot compatible

Tue Dec 21 00:41:57 CET 2010

On 12/20/2010 11:15 PM, stanley wrote:
>
>       Will coreboot work on my machine?
>

I have some good news and some not so good news.

Good news first:
The north/southbridges you have are supported.
The SuperIO is supported.
There is a very similar supported motherboard, the GA-MA785GMT-UD2H, 
which uses the same chipset/SuperIO combination.
Your motherboard has two BIOSes, so you can play around with flashing 
coreboot without the infernal fear of bricking your computer.

The not so good news:
You must be prepared to recover from a bad flash. Your first attempt 
will most likely fail. Since your BIOSes are soldered on the board, you 
need to be very careful which one you are running, and which one you are 
flashing. If you accidentally flash both with non-working stuff, you are 
SOL.

I would first try flashing the image for the GA-MA785GMT-UD2H, it might 
work out of the box. Don't forget to add a payload though.

I see you mainboard has a header for a serial port. Build coreboot with 
the debug console enabled and have a second machine ready to capture the 
messages from the serial port in case something goes wrong.

And let us know of the results.

And as always, you do this at your own risk.

Alex

> Data for CoreBoot.
>
> Step 1: A very brief description of your system: board vendor, board
> name, CPU, northbridge, southbridge, and optionally other important
> details.
> MB Gigabyte, Gigabyte-MA785G-UD3H. Athlon II X3 445 Rana/ X4
> B45(unlocked one core). Northbridge: Amd 785G, southbridge Amd SB710.
>
> Step 2: Linux sudo "*lspci -tvnn*"
> -[0000:00]-+-00.0 Advanced Micro Devices [AMD] RS780 Host Bridge
> Alternate [1022:9601]
> +-02.0-[0000:01]----00.0 nVidia Corporation G84 [GeForce 8600 GT]
> [10de:0402]
> +-04.0-[0000:02]----00.0 nVidia Corporation G98 [GeForce 8400 GS]
> [10de:06e4]
> +-0a.0-[0000:03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168B
> PCI Express Gigabit Ethernet controller [10ec:8168]
> +-11.0 ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
> [1002:4391]
> +-12.0 ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
> +-12.1 ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
> +-12.2 ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
> +-13.0 ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
> +-13.1 ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
> +-13.2 ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
> +-14.0 ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
> +-14.1 ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
> +-14.2 ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
> +-14.3 ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
> +-14.4-[0000:04]--+-06.0 VIA Technologies Inc. VT1720/24 [Envy24PT/HT]
> PCI Multi-Channel Audio Controller [1412:1724]
> | \-0e.0 Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller
> (PHY/Link) [104c:8024]
> +-14.5 ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
> +-18.0 Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron]
> HyperTransport Configuration [1022:1200]
> +-18.1 Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron]
> Address Map [1022:1201]
> +-18.2 Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron]
> DRAM Controller [1022:1202]
> +-18.3 Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron]
> Miscellaneous Control [1022:1203]
> \-18.4 Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron]
> Link Control [1022:1204]
>
> Step 3: Super I/O chip on the mainboard (report the model numbers on the
> actual chip, for example "Winbond W83627HF" and/or run "*superiotool
> <http://www.coreboot.org/Superiotool> -dV*").
> iTE IT8718(?) super I/O chip.
>
> superiotool r3844
> Probing for ALi Super I/O at 0x3f0...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for ALi Super I/O at 0x370...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
> Found ITE IT8718F (id=0x8718, rev=0x8) at 0x2e
> Register dump:
> idx 20 21 22 23 24 2b
> val 87 18 08 40 00 00
> def 87 18 01 00 00 00
> LDN 0x00 (Floppy)
> idx 30 60 61 70 74 f0 f1
> val 00 00 00 00 04 00 80
> def 00 03 f0 06 02 00 00
> LDN 0x01 (COM1)
> idx 30 60 61 70 f0 f1 f2 f3
> val 01 03 f8 04 00 50 00 7f
> def 00 03 f8 04 00 50 00 7f
> LDN 0x02 (COM2)
> idx 30 60 61 70 f0 f1 f2 f3
> val 00 00 00 00 00 50 00 7f
> def 00 02 f8 03 00 50 00 7f
> LDN 0x03 (Parallel port)
> idx 30 60 61 62 63 70 74 f0
> val 01 03 78 00 00 07 04 08
> def 00 03 78 07 78 07 03 03
> LDN 0x04 (Environment controller)
> idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6
> val 01 02 28 00 00 00 08 00 2e 80 08 20 0c
> def 00 02 90 02 30 09 00 00 00 00 00 NA NA
> LDN 0x05 (Keyboard)
> idx 30 60 61 62 63 70 71 f0
> val 01 00 60 00 64 01 02 48
> def 01 00 60 00 64 01 02 00
> LDN 0x06 (Mouse)
> idx 30 70 71 f0
> val 00 00 02 00
> def 00 0c 02 00
> LDN 0x07 (GPIO)
> idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4
> b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c5 c8 c9 ca cb cc e0 e1 e2 e3 e4 e5
> e6 e7 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
> val 80 50 00 41 00 00 01 00 00 02 20 00 00 00 00 00 00 00 00 00 00 00 00
> 00 80 00 00 40 01 00 80 40 00 01 00 00 80 40 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 26 00 00 00 00 00 d4 00 00 00
> def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 20 38 00 00 00 00 00 00
> 00 00 00 00 00 00 00 01 00 00 40 00 00 01 00 00 40 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 00 00
> LDN 0x0a (Consumer IR)
> idx 30 60 61 70 f0
> val 00 03 10 0b 06
> def 00 03 10 0b 00
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=standard) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>
>
> Step 4: Type of BIOS device
> output of "*flashrom <http://www.coreboot.org/Flashrom> -V*"
> flashrom v0.9.1-r946
> No coreboot table found.
> DMI string system-manufacturer: "Gigabyte Technology Co., Ltd."
> DMI string system-product-name: "GA-MA785G-UD3H"
> DMI string system-version: " "
> DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd."
> DMI string baseboard-product-name: "GA-MA785G-UD3H"
> DMI string baseboard-version: " "
> DMI string chassis-type: "Desktop"
> Found ITE Super I/O, id 8718
> Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base
> address is at 0xfec10000
> AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0
> PrefetchEnSPIFromIMC=1, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1
> SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1,
> ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0
> GPIO11 used for SPI_DO
> GPIO12 used for SPI_DI
> GPIO31 used for SPI_HOLD
> GPIO32 used for SPI_CS
> GPIO47 used for SPI_CLK
> ROM strap override is not active
> OK.
> This chipset supports the following protocols: LPC,FWH,SPI.
> Disabling flash write protection for board "GIGABYTE GA-MA78GM-S2H"...
> Serial flash segment 0xfffe0000-0xffffffff disabled
> Serial flash segment 0x000e0000-0x000fffff disabled
> Serial flash segment 0xffee0000-0xffefffff disabled
> Serial flash segment 0xfff80000-0xfffeffff disabled
> LPC write to serial flash disabled
> Serial flash pin 29
> Serial flash port 0x0000
> FAILED!
> Calibrating delay loop... 781M loops per second, 100 myus = 201 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x23, id2 0xe2
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Chip status register is 00
> Chip status register: Status Register Write Disable (SRWD) is not set
> Chip status register: Bit 6 is not set
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
> Chip status register: Write Enable Latch (WEL) is not set
> Chip status register: Write In Progress (WIP/BUSY) is not set
> Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address
> 0xfff00000.
> Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xc6, id2
> 0x63, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF040.REMS, 512 KB: REMS returned c2 13.
> probe_spi_rems: id1 0xc2, id2 0x13
> Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF040B.REMS, 512 KB: REMS returned c2 13.
> probe_spi_rems: id1 0xc2, id2 0x13
> Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xc6, id2
> 0x63, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x29, id2
> 0xf1, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x23, id2 0xe2
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x24, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xc6, id2
> 0x63, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xc6, id2
> 0x63, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x14. Ignoring
> RES in favour of RDID.
> Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC,FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x23, id2 0xe2
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x23, id2 0xe2
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xc6, id2 0x63
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x23, id2 0xe2
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0x24, id2 0x41
> Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type
> LPC,FWH,SPI and chip bus type Parallel are incompatible.
> Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x23, id2
> 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x24, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xc6, id2
> 0x63, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xc6, id2
> 0x63, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
> probe timing information, using default 10mS/40uS. probe_jedec_common:
> id1 0x23, id2 0xe2, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero
> size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero
> size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero
> size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero
> size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13
> Not unmapping zero size at (nil)
> ===
> This flash part has status UNTESTED for operations: ERASE
> Please email a report to flashrom at flashrom.org if any of the above
> operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -rV,
> -wV, -EV), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> No operations were specified.
>
>
> Step 5: URL to the mainboard specifications page
> http://gigabyte.com/products/product-page.aspx?pid=3138&dl=1#sp
> <http://gigabyte.com/products/product-page.aspx?pid=3138&dl=1#sp>
>
> OR, May be, I can use alternative CoreBoot version?
>