[coreboot] DL145 G1 with dual dualcore CPU using coreboot ?
Oskar Enoksson
enok at lysator.liu.se
Thu Aug 5 21:58:47 CEST 2010
On 08/05/2010 08:03 PM, Myles Watson wrote:
> On Thu, Aug 5, 2010 at 9:59 AM, Oskar Enoksson <enok at lysator.liu.se> wrote:
>
>> Hello. Sorry to bother you all with a BIOS problem ...
>>
>> I have a large number of old HP DL145 G1 servers with two Opteron
>> 248 each (single core). I want to upgrade the CPU's to Opteron 280 (dualcore).
>>
>> I have tried to simply install two 280 CPU's and boot up. The BIOS bootup process first seems to work fine
>> detecting the harddrive, USB, management processor, memory etc. Then
>> there is a warning text "Warning: Unknown processor. Please contact your
>> BIOS vendor for appropriate updates". After that it detects the BMC
>>
>> I already have the last BIOS available from HP (from 21/7 2005)
>> installed.
>>
>> Would it be possible to tweak coreboot to make these servers work with dualcore CPU's?
>>
> Definitely possible. Probably pretty easy. It's very similar to the
> amd serengeti_cheetah. If you want to support it, you could start by
> running superiotool to find out what superio you have. If it is the
> same as serengeti_cheetah there should be very little work required to
> support it.
>
> The wiki has useful information about superiotool and getting started.
>
> Thanks,
> Myles
>
Thanks for responding!
I compiled superiotool from coreboot trunk, and flashrom from the latest
release 0.9.2. The output from "superiotool", "superiotool -dV" and
"flashrom -V" follows. I hope someone can make something out of it. As
for Serengeti Cheetah compared to Serenade I see the numbers 8111, 8151
and 8132 listed for Serengeti, but my lspci only mentions 8111 and 8131.
How significant is that?
[root at cl001 superiotool]# ./superiotool
superiotool r
Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x3a) at 0x2e
[root at cl001 superiotool]# ./superiotool -dV
superiotool r
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0x80fe, id=0x3a52
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0x0000, id=0x0035
Probing for ITE Super I/O (init=standard) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0x523a, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
Failed. Returned data: id=0x3500, rev=0x0
Probing for ITE Super I/O (init=it8502e) at 0x4e...
Failed. Returned data: id=0x3500, rev=0x0
Probing for ITE Super I/O (init=it8761e) at 0x4e...
Failed. Returned data: id=0x3500, rev=0x0
Probing for ITE Super I/O (init=it8228e) at 0x4e...
Failed. Returned data: id=0x3500, rev=0x0
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0x3500, rev=0x0
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: sid=0x35, srid=0x03
Probing for NSC Super I/O at 0x15c...
Failed. Returned data: port=0xff, port+1=0xff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Failed. Returned data: sid=0xff, id=0x00, rev=0x00
Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e...
Failed. Returned data: sid=0xff, id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0x35, rev=0x00
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x3a) at 0x2e
Register dump:
idx 02 20 21 22 23 24 25 26 28 29 2a 2b 2c 2e 2f
val ff 52 3a ff fe 80 00 00 00 00 7c 01 ff 00 ff
def 00 52 NA ff 00 MM 00 00 00 00 7c c0 00 00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2 f4 f5
val 00 03 f0 06 02 0e 00 ff 00 00
def 01 03 f0 06 02 0e 00 ff 00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 00 03 78 07 03 3f
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 00 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 00 02 f8 03 00 00
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 42
def 01 00 60 00 64 01 0c 80
LDN 0x06 (Consumer IR)
idx 30 60 61 70
val 00 00 00 00
def 00 00 00 00
LDN 0x07 (Game port, MIDI port, GPIO 1)
idx 30 60 61 62 63 70 f0 f1 f2
val 00 02 01 03 30 09 ff ff ff
def 00 02 01 03 30 09 ff 00 00
LDN 0x08 (GPIO 2, watchdog timer)
idx 30 f0 f1 f2 f3 f5 f6 f6 f7
val 00 ff ff ff 00 40 00 00 00
def 00 ff 00 00 00 00 00 00 00
LDN 0x09 (GPIO 3)
idx 30 f0 f1 f2 f3
val 00 ff ff ff 00
def 00 ff 00 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff
val 01 00 00 00 10 00 a0 00 00 00 00 8f 10 00 00 20 05 00 00
def 00 00 00 00 NA NA 00 00 00 00 00 00 00 00 00 00 00 00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70 f0
val 01 02 90 00 00
def 00 00 00 00 00
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0x35/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0x35/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0x35/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0x35/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
PCI device 1106:0686 not found.
[root at cl001 flashrom-0.9.2]# ./flashrom -V
flashrom v0.9.2-r1001 on Linux 2.6.33.7-dl145 (x86_64), built with
libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat
4.1.2-46)
flashrom is free software, get the source code at
http://www.flashrom.org
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "HP"
DMI string system-product-name: "ProLiant DL145 G1"
DMI string system-version: " "
DMI string baseboard-manufacturer: "HP"
DMI string baseboard-product-name: "PCBA Serenade-3 V0100219-300"
DMI string baseboard-version: " "
DMI string chassis-type: "Rack Mount Chassis"
Found chipset "AMD AMD8111", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 1089M loops per second, 10 myus = 12 us, 100
myus = 101 us, 1000 myus = 1008 us, 10000 myus = 10011 us,
OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT25DF021, 256 KB:
skipped.
Probing for Atmel AT25DF041A, 512 KB:
skipped.
Probing for Atmel AT25DF081, 1024 KB:
skipped.
Probing for Atmel AT25DF161, 2048 KB:
skipped.
Probing for Atmel AT25DF321, 4096 KB:
skipped.
Probing for Atmel AT25DF321A, 4096 KB:
skipped.
Probing for Atmel AT25DF641, 8192 KB:
skipped.
Probing for Atmel AT25F512B, 64 KB:
skipped.
Probing for Atmel AT25FS010, 128 KB:
skipped.
Probing for Atmel AT25FS040, 512 KB:
skipped.
Probing for Atmel AT26DF041, 512 KB:
skipped.
Probing for Atmel AT26DF081A, 1024 KB:
skipped.
Probing for Atmel AT26DF161, 2048 KB:
skipped.
Probing for Atmel AT26DF161A, 2048 KB:
skipped.
Probing for Atmel AT26F004, 512 KB:
skipped.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT45CS1282, 16896 KB:
skipped.
Probing for Atmel AT45DB011D, 128 KB:
skipped.
Probing for Atmel AT45DB021D, 256 KB:
skipped.
Probing for Atmel AT45DB041D, 512 KB:
skipped.
Probing for Atmel AT45DB081D, 1024 KB:
skipped.
Probing for Atmel AT45DB161D, 2048 KB:
skipped.
Probing for Atmel AT45DB321C, 4224 KB:
skipped.
Probing for Atmel AT45DB321D, 4096 KB:
skipped.
Probing for Atmel AT45DB642D, 8192 KB:
skipped.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf,
id2 0x51
Probing for AMIC A25L40PT, 512 KB:
skipped.
Probing for AMIC A25L40PU, 512 KB:
skipped.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Eon EN25B05, 64 KB:
skipped.
Probing for Eon EN25B05T, 64 KB:
skipped.
Probing for Eon EN25B10, 128 KB:
skipped.
Probing for Eon EN25B10T, 128 KB:
skipped.
Probing for Eon EN25B20, 256 KB:
skipped.
Probing for Eon EN25B20T, 256 KB:
skipped.
Probing for Eon EN25B40, 512 KB:
skipped.
Probing for Eon EN25B40T, 512 KB:
skipped.
Probing for Eon EN25B80, 1024 KB:
skipped.
Probing for Eon EN25B80T, 1024 KB:
skipped.
Probing for Eon EN25B16, 2048 KB:
skipped.
Probing for Eon EN25B16T, 2048 KB:
skipped.
Probing for Eon EN25B32, 4096 KB:
skipped.
Probing for Eon EN25B32T, 4096 KB:
skipped.
Probing for Eon EN25B64, 8192 KB:
skipped.
Probing for Eon EN25B64T, 8192 KB:
skipped.
Probing for Eon EN25D16, 2048 KB:
skipped.
Probing for Eon EN25F05, 64 KB:
skipped.
Probing for Eon EN25F10, 128 KB:
skipped.
Probing for Eon EN25F20, 256 KB:
skipped.
Probing for Eon EN25F40, 512 KB:
skipped.
Probing for Eon EN25F80, 1024 KB:
skipped.
Probing for Eon EN25F16, 2048 KB:
skipped.
Probing for Eon EN25F32, 4096 KB:
skipped.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x43,
id2 0x48, id1 is normal flash content, id2 is normal flash
content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x43,
id2 0x48, id1 is normal flash content, id2 is normal flash
content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2
0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2
0xff
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX25L512, 64 KB:
skipped.
Probing for Macronix MX25L1005, 128 KB:
skipped.
Probing for Macronix MX25L2005, 256 KB:
skipped.
Probing for Macronix MX25L4005, 512 KB:
skipped.
Probing for Macronix MX25L8005, 1024 KB:
skipped.
Probing for Macronix MX25L1605, 2048 KB:
skipped.
Probing for Macronix MX25L1635D, 2048 KB:
skipped.
Probing for Macronix MX25L3205, 4096 KB:
skipped.
Probing for Macronix MX25L3235D, 4096 KB:
skipped.
Probing for Macronix MX25L6405, 8192 KB:
skipped.
Probing for Macronix MX25L12805, 16384 KB:
skipped.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for Numonyx M25PE10, 128 KB:
skipped.
Probing for Numonyx M25PE20, 256 KB:
skipped.
Probing for Numonyx M25PE40, 512 KB:
skipped.
Probing for Numonyx M25PE80, 1024 KB:
skipped.
Probing for Numonyx M25PE16, 2048 KB:
skipped.
Probing for PMC Pm25LV010, 128 KB:
skipped.
Probing for PMC Pm25LV016B, 2048 KB:
skipped.
Probing for PMC Pm25LV020, 256 KB:
skipped.
Probing for PMC Pm25LV040, 512 KB:
skipped.
Probing for PMC Pm25LV080B, 1024 KB:
skipped.
Probing for PMC Pm25LV512, 64 KB:
skipped.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Sanyo LF25FW203A, 2048 KB:
skipped.
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Spansion S25FL008A, 1024 KB:
skipped.
Probing for Spansion S25FL016A, 2048 KB:
skipped.
Probing for SST SST25VF016B, 2048 KB:
skipped.
Probing for SST SST25VF032B, 4096 KB:
skipped.
Probing for SST SST25VF040.REMS, 512 KB:
skipped.
Probing for SST SST25VF040B, 512 KB:
skipped.
Probing for SST SST25VF040B.REMS, 512 KB:
skipped.
Probing for SST SST25VF080B, 1024 KB:
skipped.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Found chip "SST SST49LF040" (512 KB, LPC) at physical address
0xfff80000.
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M25P05-A, 64 KB:
skipped.
Probing for ST M25P05.RES, 64 KB:
skipped.
Probing for ST M25P10-A, 128 KB:
skipped.
Probing for ST M25P10.RES, 128 KB:
skipped.
Probing for ST M25P20, 256 KB:
skipped.
Probing for ST M25P40, 512 KB:
skipped.
Probing for ST M25P40-old, 512 KB:
skipped.
Probing for ST M25P80, 1024 KB:
skipped.
Probing for ST M25P16, 2048 KB:
skipped.
Probing for ST M25P32, 4096 KB:
skipped.
Probing for ST M25P64, 8192 KB:
skipped.
Probing for ST M25P128, 16384 KB:
skipped.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x43, id2 0x48,
id1 is normal flash content, id2 is normal flash
content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash
content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2
0xff
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x51, id2 0x53,
id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x43, id2 0x48, id1
is normal flash content, id2 is normal flash
content
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf,
id2 0x51
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf,
id2 0x51
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf,
id2 0x51
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf,
id2 0x51
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x43, id2
0x48, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25Q80, 1024 KB: skipped.
Probing for Winbond W25Q16, 2048 KB: skipped.
Probing for Winbond W25Q32, 4096 KB: skipped.
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond
W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky
state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x51
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2
0x51
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
probe timing information, using default 10mS/40uS. probe_jedec_common:
id1 0xbf, id2 0x51
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for EON unknown EON SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
No operations were specified.
More information about the coreboot
mailing list