[coreboot] LNXI eVelocity 2 BIOS reburn

[Sebastian Lara]

Hi,

2009/9/3 Stefan Reinauer <stepan at coresystems.de>:
> Sebastian Lara wrote:
>> Hi,
>>
>> I'm trying to revive a Linux Netwox eVelocity 2 Cluster with
>> LinuxBIOS-1.1.7.8 and Etherboot 5.2 on compute nodes. After some
>> trouble, I have access to a shell after node system installation over
>> network. My problem now is that I can't get localboot to work.
>>
> What's the error?

Boot from (N)etwork (D)isk or (Q)uit? D

Probing pci disk...
[IDE]LBA48 mode
disk-1 78150744k cap: 2f00
Searching for image...
................................<abort>
Probing pci disk...
[IDE]
Probing isa disk...
<sleep>


Etherboot searches for an ELF header in the first 8K. I don't really
know how can I do this. I had tried to use a ELF image of the kernel
installed in the node but it doesn't work.



>
>> I need to know if I can re-burn the BIOS with a newer version of
>> coreboot or something else, so I can use PXE and use GRUB for booting
>> from local.
>>
> What mainboard type is that? Can you post a boot log from serial console?

It's there some way to know the mainboard type without open a node
case? Get permission to do that may take some time.

Here is the boot log:

LinuxBIOS-1.1.7.8Normal Fri Jan  7 13:55:58 MST 2005 starting...
setting up resource map....done.
02 nodes initialized.
ht reset -


LinuxBIOS-1.1.7.8Normal Fri Jan  7 13:55:58 MST 2005 starting...
setting up resource map....done.
02 nodes initialized.
Ram1.00
Ram1.01
Ram2.00
Ram2.01
Ram3
Initializing memory:  done
Initializing memory:  done
Clearing initial memory region:  done
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.7.8Normal Fri Jan  7 13:55:58 MST 2005 booting...
Enumerating buses...
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] bus ops
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] bus ops
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] ops
PCI: 00:19.3 [1022/1103] enabled
PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
HyperT reset not needed
PCI: pci_scan_bus for bus 1
PCI: 01:01.0 [1022/7450] bus ops
PCI: 01:01.0 [1022/7450] enabled
PCI: 01:01.1 [1022/7451] ops
PCI: 01:01.1 [1022/7451] enabled
PCI: 01:02.0 [1022/7450] bus ops
PCI: 01:02.0 [1022/7450] enabled
PCI: 01:02.1 [1022/7451] ops
PCI: 01:02.1 [1022/7451] enabled
PCI: 01:03.0 [1022/7460] bus ops
PCI: 01:03.0 [1022/7460] enabled
PCI: 01:04.0 [1022/7468] bus ops
PCI: 01:04.0 [1022/7468] enabled
PCI: 01:04.1 [1022/7469] ops
PCI: 01:04.1 [1022/7469] enabled
PCI: 01:04.2 [1022/746a] bus ops
PCI: 01:04.2 [1022/746a] enabled
PCI: 01:04.3 [1022/746b] bus ops
PCI: 01:04.3 [1022/746b] enabled
PCI: 01:04.5 No device operations
PCI: 01:04.6 [1022/746e] ops
PCI: 01:04.6 [1022/746e] enabled
PCI: pci_scan_bus for bus 2
PCI: 02:03.0 [14e4/16a6] enabled
PCI: 02:04.0 [14e4/16a6] enabled
PCI: pci_scan_bus returning with max=02
PCI: pci_scan_bus for bus 3
PCI: 03:01.0 [15b3/5a46] enabled
PCI: pci_scan_bus for bus 4
PCI: 04:00.0 [15b3/5a44] enabled
PCI: pci_scan_bus returning with max=04
PCI: pci_scan_bus returning with max=04
PCI: pci_scan_bus for bus 5
PCI: 05:00.0 [1022/7464] bus ops
PCI: 05:00.0 [1022/7464] enabled
PCI: 05:00.1 [1022/7464] bus ops
PCI: 05:00.1 [1022/7464] enabled
PCI: 05:00.2 No device operations
PCI: 05:01.0 No device operations
PCI: 05:06.0 [1002/4752] enabled
PCI: pci_scan_bus returning with max=05
PNP: 002e.0 disabled
PNP: 002e.1 disabled
PNP: 002e.2 disabled
PNP: 002e.3 enabled
PNP: 002e.4 disabled
PNP: 002e.5 disabled
PNP: 002e.6 enabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
I2C: 70 enabled
I2C: 50 enabled
I2C: 51 enabled
I2C: 52 enabled
I2C: 53 enabled
I2C: 54 enabled
I2C: 55 enabled
I2C: 56 enabled
I2C: 57 enabled
PCI: pci_scan_bus returning with max=05
PCI: pci_scan_bus returning with max=05
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
done
Allocating resources...
PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io
PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem
PCI: 03:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 4 io
PCI: 01:02.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 3 io
PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 5 prefmem
Allocating VGA resource PCI: 05:06.0
PCI: 00:18.0 1b8 <- [0x00e8000000 - 0x00f07fffff] prefmem <node 0 link 0>
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000002fff] io <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f8000000 - 0x00f93fffff] mem <node 0 link 0>
PCI: 01:01.0 20 <- [0x00f9100000 - 0x00f91fffff] bus 2 mem
PCI: 02:03.0 10 <- [0x00f9100000 - 0x00f910ffff] mem
PCI: 02:04.0 10 <- [0x00f9110000 - 0x00f911ffff] mem
PCI: 01:01.1 10 <- [0x00f9300000 - 0x00f9300fff] mem
PCI: 01:02.0 24 <- [0x00e8000000 - 0x00f07fffff] bus 3 prefmem
PCI: 01:02.0 20 <- [0x00f9200000 - 0x00f92fffff] bus 3 mem
PCI: 03:01.0 24 <- [0x00e8000000 - 0x00f07fffff] bus 4 prefmem
PCI: 03:01.0 20 <- [0x00f9200000 - 0x00f92fffff] bus 4 mem
PCI: 04:00.0 10 <- [0x00f9200000 - 0x00f92fffff] mem
PCI: 04:00.0 18 <- [0x00f0000000 - 0x00f07fffff] prefmem
PCI: 04:00.0 20 <- [0x00e8000000 - 0x00efffffff] prefmem
PCI: 01:02.1 10 <- [0x00f9301000 - 0x00f9301fff] mem
PCI: 01:03.0 1c <- [0x0000001000 - 0x0000001fff] bus 5 io
PCI: 01:03.0 20 <- [0x00f8000000 - 0x00f90fffff] bus 5 mem
PCI: 05:00.0 10 <- [0x00f9000000 - 0x00f9000fff] mem
PCI: 05:00.1 10 <- [0x00f9001000 - 0x00f9001fff] mem
PCI: 05:06.0 10 <- [0x00f8000000 - 0x00f8ffffff] mem
PCI: 05:06.0 14 <- [0x0000001000 - 0x00000010ff] io
PCI: 05:06.0 18 <- [0x00f9002000 - 0x00f9002fff] mem
PNP: 002e.3 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.3 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.6 60 <- [0x0000000060 - 0x0000000067] io
PNP: 002e.6 62 <- [0x0000000064 - 0x000000006b] io
PNP: 002e.6 70 <- [0x0000000001 - 0x0000000001] irq
PCI: 01:04.1 20 <- [0x00000028a0 - 0x00000028af] io
PCI: 01:04.2 10 <- [0x0000002880 - 0x000000289f] io
PCI: 01:04.3 58 <- [0x0000002000 - 0x00000020ff] io
PCI: 01:04.6 10 <- [0x0000002400 - 0x00000024ff] io
PCI: 01:04.6 14 <- [0x0000002800 - 0x000000287f] io
PCI: 00:18.3 94 <- [0x00f4000000 - 0x00f7ffffff] mem <gart>
PCI: 00:19.3 94 <- [0x00f4000000 - 0x00f7ffffff] mem <gart>
done.
Enabling resourcess...
PCI: 00:18.0 cmd <- 140
PCI: 01:01.0 bridge ctrl <- 0003
PCI: 01:01.0 cmd <- 146
PCI: 02:03.0 cmd <- 142
PCI: 02:04.0 cmd <- 142
PCI: 01:01.1 subsystem <- 161f/3016
PCI: 01:01.1 cmd <- 146
PCI: 01:02.0 bridge ctrl <- 0003
PCI: 01:02.0 cmd <- 146
PCI: 03:01.0 bridge ctrl <- 0003
PCI: 03:01.0 cmd <- 146
PCI: 04:00.0 cmd <- 142
PCI: 01:02.1 subsystem <- 161f/3016
PCI: 01:02.1 cmd <- 146
PCI: 01:03.0 bridge ctrl <- 000b
PCI: 01:03.0 cmd <- 147
PCI: 05:00.0 subsystem <- 161f/3016
PCI: 05:00.0 cmd <- 142
PCI: 05:00.1 subsystem <- 161f/3016
PCI: 05:00.1 cmd <- 142
PCI: 05:06.0 cmd <- 1c3
PCI: 01:04.0 subsystem <- 161f/3016
PCI: 01:04.0 cmd <- 14f
PCI: 01:04.1 subsystem <- 161f/3016
PCI: 01:04.1 cmd <- 141
PCI: 01:04.2 subsystem <- 161f/3016
PCI: 01:04.2 cmd <- 141
PCI: 01:04.3 subsystem <- 161f/3016
PCI: 01:04.3 cmd <- 141
PCI: 01:04.6 subsystem <- 161f/3016
PCI: 01:04.6 cmd <- 141
PCI: 00:18.1 subsystem <- 161f/3016
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 161f/3016
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
PCI: 00:19.0 cmd <- 140
PCI: 00:19.1 subsystem <- 161f/3016
PCI: 00:19.1 cmd <- 140
PCI: 00:19.2 subsystem <- 161f/3016
PCI: 00:19.2 cmd <- 140
PCI: 00:19.3 cmd <- 140
done.
Initializing devices...
Root Device init
PCI: 00:18.0 init
PCI: 01:01.0 init
PCI: 01:02.0 init
PCI: 01:03.0 init
PCI: 01:04.0 init
RTC Init
enabling HPET @0xfed00000
PNP: 002e.3 init
PNP: 002e.6 init
PCI: 01:04.1 init
IDE1 IDE0 PCI: 01:04.3 init
set power on after power fail
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:19.0 init
PCI: 00:19.3 init
NB: Function 3 Misc Control.. done.
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device f5a
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Clearing memory 0K - 1048576K: --------------- done
Setting up local apic... apic_id: 0 done.
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device f5a
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Clearing memory 1048576K - 2097152K: ---------------- done
Setting up local apic... apic_id: 1 done.
CPU #1 Initialized
All AP CPUs stopped
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
/home/cwxbuild/modules/linuxbios/hdama/freebios2/src/arch/i386/boot/pirq_routing.c:
  28:check_pirq_routing_table() - irq_routing_table located at:
0x000f0000
done.
Wrote the mp table end at: 00000020 - 00000224
Wrote linuxbios table at: 00000500 - 00000d88  checksum 9e78

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

Found ELF candiate at offset 0
Loading Etherboot version: 5.2.4js1
Dropping non PT_LOAD segment
New segment addr 0x20000 size 0x41e65 offset 0xc0 filesize 0x993a
(cleaned up) New segment addr 0x20000 size 0x41e65 offset 0xc0 filesize 0x993a
Loading Segment: addr: 0x000000007ffc4000 memsz: 0x0000000000010000
filesz: 0x000000000000993a
Clearing Segment: addr: 0x000000007ffcd93a memsz: 0x00000000000066c6
Loading Segment: addr: 0x0000000000030000 memsz: 0x0000000000031e65
filesz: 0x0000000000000000
Clearing Segment: addr: 0x0000000000030000 memsz: 0x0000000000031e65
Jumping to boot code at 0x20000
ROM segment 0x0000 length 0x0000 reloc 0x00020000
CPU 2486 Mhz
Etherboot 5.2.4js1 (GPL) http://etherboot.org ELF64 ELF with TFTP SLAM
LACP for [EEPRO100][E1000][3C90X][TG3][IDE]
Relocating _text from: [00029930,00063080) to [7fec68b0,7ff00000)
�Probing pci nic... (D)isk or (Q)uit?
[tg3-5702X]Ethernet addr: 00:50:45:5C:34:1A
Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit)
Link is up at 100 Mbps, full duplex.
Searching for server (DHCP)...
...Me: 10.1.255.254, Server: 10.1.1.1, Gateway 10.1.1.1
Loading 10.1.1.1:vmlinuz.vo ...(ELF)... ................


Thanks for the help.
-- 
Sebastián Lara Menares
Ingeniería Civil Electrónica
Universidad de Concepción