[coreboot] Error executing VGA ROM with coreboot

Mansoor mansoor at iwavesystems.com
Sat Oct 31 08:44:21 CET 2009


Hi All

I have attached the YABEL output.

Even though coreboot does only the hardware initialization, it has to do a
VGA rom init for payloads other than seabios? 
I my case I was planning to use FILO as payload to boot Linux. FILO doesn't
do any VGA init.

> -----Original Message-----
> From: Joseph Smith [mailto:joe at settoplinux.org]
> Sent: Friday, October 30, 2009 6:22 PM
> To: mansoor at iwavesystems.com
> Cc: coreboot
> Subject: Re: [coreboot] Error executing VGA ROM with coreboot
> Importance: Low
> 
> 
> 
> 
> On Fri, 30 Oct 2009 17:32:03 +0530 (IST), mansoor at iwavesystems.com wrote:
> >>
> >>
> >>
> >> On Fri, 30 Oct 2009 10:11:36 +0530, "Mansoor"
> <mansoor at iwavesystems.com>
> >> wrote:
> >>>
> >>>
> >>>> -----Original Message-----
> >>>> From: Joe [mailto:joe at settoplinux.org]
> >>>> Sent: Thursday, October 29, 2009 7:32 PM
> >>>> To: Mansoor
> >>>> Cc: 'coreboot'
> >>>> Subject: Re: [coreboot] Error executing VGA ROM with coreboot
> >>>>
> >>>> On 10/29/2009 07:38 AM, Mansoor wrote:
> >>>> > Hi
> >>>> >
> >>>> > I keep getting "ILLEGAL EXTENDED X86 OPCODE!" from my VGA ROM while
> >>>> > trying run VGA ROM in coreboot.
> >>>> >
> >>>> > I tried x86emu, yabel and real mode for running VGA ROM with no
> luck.
> >>>> > But the same VGA ROM is running with seabios.
> >>>> >
> >>>> > I am attaching the boot logs with x86emu, real mode and with
> seabios.
> >>>> >
> >>>> > Any help?
> >>>> >
> >>>> > What is the big difference while executing VGA ROM in coreboot and
> >>>> seabios?
> >>>> >
> >>>> > Why coreboot can't run a VGA ROM which seabios can?
> >>>> >
> >>>> Hmm looks like your getting Unexpected Exception errors. Something is
> >>>> not initializing correctly. Memory maybe?
> >>>
> >>> I don't think so, because with seabios I am able to load Linux in GUI
> >> mode.
> >>> Only with coreboot I am facing these issues for initializing VGA ROM.
> >>>
> >>>
> >> You could always try Debugging the Unexpected Exception errors with
GDB,
> >> this may give you a clue on what the problem is.
> >>
> >> http://www.coreboot.org/Debugging
> >
> > Actually i tried GDB and failed to build the image.. I got  section
> > overlap error and was not able to solve it.
> >
> > What i didnt understand is
> >
> > Why coreboot can't run a VGA ROM which seabios can?
> > What is the big difference while executing VGA ROM in coreboot and
> > seabios?
> >
> > From the log you can see seabios emits some warning messages(fail
> > handle_155fXX) but still it continues to run the VGA ROM, where x86emu
> or
> > realmode hangs with error messages
> >
> > in seabios
> > fail handle_155fXX:23(86):
> >
> >    a=a0005f38  b=000008c1  c=00000003  d=0000c000 ds=a000 es=c000
> ss=a000
> >
> >   si=00000000 di=00000003 bp=000077cc sp=000077be cs=c000 ip=3115
> f=0002
> >
> > Real mode
> >
> > Real mode stub @00000500: 422 bytes
> >
> > Calling Option ROM...
> >
> > oprom: INT# 0x8e41a854
> >
> > oprom: eax: 8a000885 ebx: 0e21e039 ecx: 00028101 edx: 2989b606
> >
> > oprom: ebp: 58000a58 esp: c0010004 edi: c668404c esi: c2650304
> >
> > oprom:  ip: e6b0      cs: 8831   flags: 00002900
> >
> > Unexpected Exception: 6 @ 10:f6fdd07d - Halting
> >
> > Code: 0 eflags: 00010012
> >
> > eax: 00007776 ebx: 00008831 ecx: 0010ef73 edx: 001059b1
> >
> > edi: c0010004 esi: 8e41a854 ebp: 00002900 esp: 0000774a
> >
> well lets see,
> The coreboot rom emulators are completely different beasts than seabios.
> Perhaps you take a look at the differences in the interrupt handlers to
> find out the differences?
> 
> I would suggest running YABEL in full DEBUG mode, YABEL is able to output
> rom PCI accesses, io accesses, interrupt calls etc. I would also suggest
> if
> you do this to output your bootlog to a text file in minicom, because it
> may run for several hours and get quite large. I would be glad to take a
> look at it and see if I can see what is going on.
> 
> --
> Thanks,
> Joseph Smith
> Set-Top-Linux
> www.settoplinux.org
> 
> 
> --------------------------------------------------------------------------
> -----
> DISCLAIMER: This e-mail and any attachment (s) is for authorised use by
> the
> intended recipient (s) only. It may contain proprietary material,
> confidential
> information and/or be subject to the legal privilege of iWave Systems
> Technologies Private Limited. If you have received this message in error,
> please notify the originator immediately. If you are not the intended
> recipient, you are notified that you are strictly prohibited from
> retaining,
> using, copying, alerting or disclosing the content of this message. Thank
> you
> for your co-operation.
> --------------------------------------------------------------------------
> ----

------------------------------------------------------------------------------- 
DISCLAIMER: This e-mail and any attachment (s) is for authorised use by the
intended recipient (s) only. It may contain proprietary material, confidential
information and/or be subject to the legal privilege of iWave Systems
Technologies Private Limited. If you have received this message in error,
please notify the originator immediately. If you are not the intended
recipient, you are notified that you are strictly prohibited from retaining,
using, copying, alerting or disclosing the content of this message. Thank you
for your co-operation. 
------------------------------------------------------------------------------

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: yabel.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091031/44e971a2/attachment.txt>


More information about the coreboot mailing list