[coreboot] [Fwd: Re: [Fwd: Re: [Fwd: Re: arima hdama problem]]]

[Hugh Greenberg]

The script didn't help.  Seabios just doesn't see the rom.  Is this a 
seabios problem?  I didn't have this problem for the tyan s2881.  Here 
is the output again:

PCI Expansion ROM, signature 0x0000, INIT size 0x0000, data ptr 0x0000
Incorrect Expansion ROM Header Signature 0000
Devices initialized
Show all devs...After init.
Root Device: enabled 1, 0 resources
APIC_CLUSTER: 0: enabled 1, 0 resources
APIC: 00: enabled 1, 0 resources
PCI_DOMAIN: 0000: enabled 1, 5 resources
PCI: 00:18.0: enabled 1, 4 resources
PCI: 01:01.0: enabled 1, 3 resources
PCI: 01:01.1: enabled 1, 1 resources
PCI: 01:02.0: enabled 0, 0 resources
PCI: 01:02.1: enabled 1, 1 resources
PCI: 01:03.0: enabled 1, 3 resources
PCI: 04:00.0: enabled 1, 1 resources
PCI: 04:00.1: enabled 1, 1 resources
PCI: 04:00.2: enabled 0, 0 resources
PCI: 04:01.0: enabled 0, 0 resources
PCI: 04:06.0: enabled 1, 4 resources
PCI: 01:04.0: enabled 1, 3 resources
PNP: 002e.0: enabled 0, 3 resources
PNP: 002e.1: enabled 0, 3 resources
PNP: 002e.2: enabled 0, 4 resources
PNP: 002e.3: enabled 1, 2 resources
PNP: 002e.4: enabled 0, 2 resources
PNP: 002e.5: enabled 0, 1 resources
PNP: 002e.6: enabled 1, 3 resources
PNP: 002e.7: enabled 0, 2 resources
PNP: 002e.8: enabled 0, 2 resources
PNP: 002e.9: enabled 0, 2 resources
PNP: 002e.a: enabled 0, 2 resources
PCI: 01:04.1: enabled 1, 1 resources
PCI: 01:04.2: enabled 1, 1 resources
PCI: 01:04.3: enabled 1, 1 resources
I2C: 01:70: enabled 1, 0 resources
I2C: 00:2c: enabled 1, 0 resources
I2C: 01:50: enabled 1, 0 resources
I2C: 01:51: enabled 1, 0 resources
I2C: 01:52: enabled 1, 0 resources
I2C: 01:53: enabled 1, 0 resources
I2C: 01:54: enabled 1, 0 resources
I2C: 01:55: enabled 1, 0 resources
I2C: 01:56: enabled 1, 0 resources
I2C: 01:57: enabled 1, 0 resources
PCI: 01:04.5: enabled 0, 0 resources
PCI: 01:04.6: enabled 1, 2 resources
PCI: 00:18.1: enabled 1, 0 resources
PCI: 00:18.2: enabled 1, 0 resources
PCI: 00:18.3: enabled 1, 1 resources
PCI: 00:19.0: enabled 1, 0 resources
PCI: 00:19.1: enabled 1, 0 resources
PCI: 00:19.2: enabled 1, 0 resources
PCI: 00:19.3: enabled 1, 0 resources
APIC: 01: enabled 1, 0 resources
PCI: 02:03.0: enabled 1, 2 resources
PCI: 02:04.0: enabled 1, 2 resources
Initializing CBMEM area to 0x3fff0000 (65536 bytes)
Adding CBMEM entry as no. 1
Moving GDT to 3fff0200...ok
High Tables Base is 3fff0000.
Copying Interrupt Routing Table to 0x000f0000... done.
Adding CBMEM entry as no. 2
Copying Interrupt Routing Table to 0x3fff0400... done.
PIRQ table: 176 bytes.
Looking for bad PCIX MHz input
Looking for bad Hot Swap Enable
OK 133MHz & Hot Swap is off
Wrote the mp table end at: 000f0410 - 000f0614
Adding CBMEM entry as no. 3
Looking for bad PCIX MHz input
Looking for bad Hot Swap Enable
OK 133MHz & Hot Swap is off
Wrote the mp table end at: 3fff1410 - 3fff1614
MP table: 532 bytes.
Adding CBMEM entry as no. 4
Writing high table forward entry at 0x00000500
Wrote coreboot table at: 00000500 - 00000518  checksum 9bdf
New low_table_end: 0x00000518
Now going to write high coreboot table at 0x3fff2400
rom_table_end = 0x3fff2400
Adjust low_table_end from 0x00000518 to 0x00001000
Adjust rom_table_end from 0x3fff2400 to 0x40000000
Adding high table area
Wrote coreboot table at: 3fff2400 - 3fff2ca4  checksum b5b9
coreboot table: 2212 bytes.
 0. FREE SPACE 3fff4400 0000bc00
 1. GDT        3fff0200 00000200
 2. IRQ TABLE  3fff0400 00001000
 3. SMP TABLE  3fff1400 00001000
 4. COREBOOT   3fff2400 00002000
Check CBFS header at fffeffe0
magic is 4f524243
Found CBFS header at fffeffe0
Check fallback/coreboot_ram
CBFS: follow chain: fff80000 + 38 + a590 + align -> fff8a600
Check fallback/payload
Got a payload
Loading segment from rom address 0xfff8a638
  data (compression=1)
malloc Enter, size 36, free_mem_ptr 00160ce4
malloc 00160ce4
  New segment dstaddr 0xf0000 memsize 0x10000 srcaddr 0xfff8a670 
filesize 0x7350
  (cleaned up) New segment addr 0xf0000 size 0x10000 offset 0xfff8a670 
filesize0
Loading segment from rom address 0xfff8a654
  Entry Point 0x000fc4f3
Loading Segment: addr: 0x00000000000f0000 memsz: 0x0000000000010000 
filesz: 0x00
lb: [0x0000000000100000, 0x0000000000164000)
Post relocation: addr: 0x00000000000f0000 memsz: 0x0000000000010000 
filesz: 0x00
using LZMA
[ 0x00000000000f0000, 0000000000100000, 0x0000000000100000) <- 
00000000fff8a670
dest f0000, end 100000, bouncebuffer 7ff38000
Loaded segments
Jumping to boot code at fc4f3
entry    = 0x000fc4f3
lb_start = 0x00100000
lb_size  = 0x00064000
adjust   = 0x7fe9c000
buffer   = 0x7ff38000
     elf_boot_notes = 0x00113a20
adjusted_boot_notes = 0x7ffafa20
Start bios (version 0.4.2-20090908_202836-morn.localdomain)
CPU Mhz=1804
Found mainboard Arima HDAMA
Found CBFS header at 0xfffeffe0
Ram Size=0x80000000
Found 2 cpu(s)
Scan for VGA option rom
Got ps2 nak (status=51); continuing
ps2_recvbyte timeout
Found 0 lpt ports
Found 1 serial ports
Copying PIR from 0x3fff0400 to 0x000fdc50
Copying MPTABLE from 0x3fff1400/3fff1410 to 0x000fda30
SMBIOS ptr=0x000fda10 table=0x7ffff800

Scan for option roms
Press F12 for boot menu.

Returned 61440 bytes of ZoneHigh
e820 map has 7 items:
  0: 0000000000000000 - 000000000009f400 = 1
  1: 000000000009f400 - 00000000000a0000 = 2
  2: 00000000000f0000 - 0000000000100000 = 2
  3: 0000000000100000 - 000000003fff0000 = 1
  4: 000000003fff0000 - 0000000040000000 = 2
  5: 0000000040000000 - 000000007ffff000 = 1
  6: 000000007ffff000 - 0000000080000000 = 2
enter handle_19:
  NULL
Booting from Floppy...
fail handle_legacy_disk:845(1):
   a=00000201  b=00000000  c=00000001  d=00000000 ds=0000 es=07c0 ss=0000
  si=00000000 di=00000000 bp=00000000 sp=00007b18 cs=f000 ip=e82d  f=0002
Boot failed: could not read the boot disk

enter handle_18:
  NULL
Booting from CD-Rom...
Boot failed: Could not read from CDROM (code 0001)
enter handle_18:
  NULL
Booting from Hard Disk...
fail handle_legacy_disk:845(1):
   a=00000201  b=00000000  c=00000001  d=00000080 ds=0000 es=07c0 ss=0000
  si=00000000 di=00000000 bp=00000000 sp=00007b18 cs=f000 ip=e82d  f=0002
Boot failed: could not read the boot disk

enter handle_18:
  NULL
Booting from CBFS...
enter handle_18:
  NULL
No bootable device.

 CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3    | VT102 |      
Offline  

-- 
Hugh Greenberg



Peter Stuge wrote:
> Hugh Greenberg wrote:
>   
>> File pci14e4,16a6.rom is of type 63000000 instead oftype 30
>> and this
>> PCI Expansion ROM, signature 0x0000, INIT size 0x0000, data ptr 0x0000
>> Incorrect Expansion ROM Header Signature 0000
>>
>> I got this file from gpxe's rom O matic.  I tried getting a new one
>> just in case and got the same error.
>>     
>
> IIRC this is a known problem (by us) but there hasn't been much
> effort in getting it fixed with GPXE. There is a script in the
> SeaBIOS source tree which can fix up checksums, maybe you can try
> using that - and if it works send a hint to GPXE?
>
>
> //Peter
>
>