[coreboot] [PATCH] HP e-Vectra P2706T support
Uwe Hermann
uwe at hermann-uwe.de
Wed Oct 21 02:37:07 CEST 2009
On Wed, Oct 21, 2009 at 12:56:00AM +0200, Paweł Stawicki wrote:
> I was able to turn on the vga bios with some little changes:
>
> I added the following lines to the files:
> file: coreboot-v2/targets/hp/e_vectra_p2706t/Config.lb
> #vga bios
> pci_rom /tmp/vgabios.rom vendor_id=0x8086 device_id=0x7125
> #ethernet bios
> #pci_rom /tmp/ethbios.rom vendor_id=0x10b7 device_id=0x9200
>
> file: coreboot-v2/src/mainboard/hp/e_vectra_p2706t/Options.lb
> uses CONFIG_VGA_ROM_RUN
> default CONFIG_VGA_ROM_RUN = 1
Thanks, added to svn (the pci_rom lines are comments only, you have
to enable them).
> still, acpi is not working,
> i try to find the reason tomorrow.
Oh, this is easy. There is no ACPI implementation for this board
in coreboot.
Uwe.
--
http://www.hermann-uwe.de | http://www.randomprojects.org
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
More information about the coreboot
mailing list