[coreboot] arima hdama problem

[Hugh Greenberg]

Myles,

Attached are the files.  Thanks.

-- 
Hugh Greenberg




Myles Watson wrote:
>   
>> -----Original Message-----
>> From: coreboot-bounces at coreboot.org [mailto:coreboot-bounces at coreboot.org]
>> On Behalf Of Hugh Greenberg
>> Sent: Thursday, October 15, 2009 5:24 PM
>> To: coreboot at coreboot.org
>> Subject: [coreboot] arima hdama problem
>>
>> I am now trying to get the latest coreboot v2 installed on an Arima
>> HDAMA board.  This is the output I got after flashing it and doing a
>> hard reset:
>>
>> coreboot-2.3 Thu Oct 15 16:17:26 MDT 2009 starting...
>> (0,1) link=01
>> (1,0) link=01
>> 02 nodes initialized.
>> SBLink=00
>> NC node|link=00
>> Ram1.00
>> Ram1.01
>> Ram2.00
>> RAM end at 0x00100000 kB
>> Ram2.01
>> RAM end at 0x00200000 kB
>> Ram3
>> while waiting for BSP signal to STOP, timeout in ap 01
>>
>> It just hangs there and I don't get anymore output.  Any suggestions?
>> Thanks.
>>     
>
> Can you send ldoptions and coreboot_*.map?  I've seen something similar when
> things get messed up there.
>
> Thanks,
> Myles
>
>   
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: coreboot_ram.map
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091016/fc259ca8/attachment.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ldoptions
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091016/fc259ca8/attachment-0001.ksh>