[coreboot] libpayload: OHCI stack

Daniel Mack daniel at caiaq.de
Mon Oct 5 04:44:42 CEST 2009

Here comes a set of six patches to support OHCI controllers in

This work was originally started by Leandro Dorilex and we worked
together on this. However, his first approach to develop everything from
scratch was a little too ambitious and so we decided to take an existing
stack from U-Boot (which was again derived from Linux 2.4).

I finished the work on my own now as we urgently need it and Leandro
didn't have a proper development environment.

The stack was heavily cleaned up from many legacy code pathes and
adopted to libpayload's USB API. Also, U-Boot's stack wasn't aware of
any virtual/physical address mappings, so I had to add that.

What's missing at the moment are the implementation bits for interrupt
queues and isocronous transfers. The first one should be easy to do as I
left in all the functions for it. I just couldn't test it though.

Also unclear is the situation on big endian machines. I only have an
Geode based board here which matches the endianess of the USB
controller, so I couldn't test that either. Volounteers welcome :)

Best regards,

More information about the coreboot mailing list