[coreboot] Not supported mobo, compile for a similar one?
Myles Watson
mylesgw at gmail.com
Fri Oct 2 16:31:53 CEST 2009
On Fri, Oct 2, 2009 at 7:40 AM, Knut Kujat <knuku at gap.upv.es> wrote:
>> Each Opteron (amdk8) has three links: 0,1,&2. On this board the mcp55 is on
>> link 2. For your board you at least need to know if the 8132 is on the same
>> link as the mcp55, or a different one. After you get that right it
>> shouldn't be too hard to fix up the rest since the boards are so similar.
>>
> THX, for ur reply!
No problem. According to the manual, the 8132 is on a link attached
to a different processor, so you probably would get debug output from
the board with an unmodified h8dmr image.
Myles
More information about the coreboot
mailing list