[coreboot] tyan s2881 with seabios and gpxe

[Myles Watson]

> -----Original Message-----
> From: Hugh Greenberg [mailto:hng at lanl.gov]
> Sent: Thursday, October 01, 2009 5:46 PM
> To: Myles Watson
> Cc: coreboot at coreboot.org
> Subject: Re: [coreboot] tyan s2881 with seabios and gpxe
> 
> This is all the output I get on the serial port.  How can I get a full
> log?  I do not see the device number, its: 02:09.0 .
I thought you'd truncated it.  It's hanging for some reason.  I've never
seen Coreboot hang there.

> 
> --
> Hugh Greenberg
> Los Alamos National Laboratory, CCS-1
> Email: hng at lanl.gov
> Phone: (505) 665-6471
> 
> 
> 
> Myles Watson wrote:
> >> Thanks.  I took option number 2.  It flashed successfully, however,
> gpxe
> >> does not seem to be starting.  Here is the output from the
> >> coreboot/seabios:
> >>
> >
> >
> >>    PCI: 00:01.5: enabled 0, 0 resources
> >>    PCI: 00:01.6: enabled 0, 0 resources
> >>   PCI: 00:18.1: enabled 1, 0 resources
> >>   PCI: 00:18.2: enabled 1, 0 resources
> >>   PCI: 00:18.3: enabled 1, 0 resources
> >> APIC_CLUSTER: 0 enabled
> >> PCI_DOMAIN: 0000 enabled
> >>   PCI: 00:18.3 siblings=0
> >> CPU: APIC: 00 enabled
> >> PCI: 00:19.0 [1022/1100] enabled
> >> PCI: 00:19.1 [1022/1101] enabled
> >> PCI: 00:19.2 [1022/1102] enabled
> >> PCI: 00:19.3 [1022/1103] enabled
> >>   PCI: 00:19.3 siblings=0
> >> CPU: APIC: 01 enabled
> >> PCI: pci_scan_bus for bus 00
> >> PCI: 00:18.0 [1022/1100] enabled
> >> PCI: 00:18.1 [1022/1101] enabled
> >> PCI: 00:18.2 [1022/1102] enabled
> >> PCI: 00:18.3 [1022/1103] enabled
> >> PCI: 00:19.0 [1022/1100] enabled
> >> PCI: 00:19.1 [1022/1101] enabled
> >> PCI: 00:19.2 [1022/1102] enabled
> >> PCI: 00:19.3 [1022/1103] enabled
> >>
> >> I don't see 14e4/1648 above.  Is that the problem?
> >>
> > It should come after this.  The full log would be helpful.  Do you see
> the
> > device's PCI device number that you see in lspci?  eg. PCI: 00:01.5

The next thing in my log is:

PCI: Using configuration type 1

Do you want to try Rev 4645?  4646 was the last one that touched that code.

Sorry I'm not more help.

Thanks,
Myles