[coreboot] Qemu and SeaBios.

[Knut Kujat]

Hi,
since I want to use SeaBios on my real MoBo I wanted to try it out first
using Qemu so I compiled coreboot v2 with the emulation MoBo and using
the latest seabios-0.4.2. Now the problem is that qemu is booting all
the time without getting seabios fully loaded:
Got a
payload                                                                                         

Loading segment from rom address
0xfffc6878                                                           
  data
(compression=1)                                                                                

malloc Enter, size 36, free_mem_ptr
00119130                                                          
malloc
00119130                                                                                       

  New segment dstaddr 0xef000 memsize 0x11000 srcaddr 0xfffc68b0
filesize 0x8612                      
  (cleaned up) New segment addr 0xef000 size 0x11000 offset 0xfffc68b0
filesize 0x8612                
Loading segment from rom address 0xfffc6894
  Entry Point 0x000fc1ec
Loading Segment: addr: 0x00000000000ef000 memsz: 0x0000000000011000
filesz: 0x0000000000008612
lb: [0x0000000000100000, 0x000000000011c000)
Post relocation: addr: 0x00000000000ef000 memsz: 0x0000000000011000
filesz: 0x0000000000008612
using LZMA
lzma: Decoding error = 1
[ 0x00000000000ef000, 00000000000ef000, 0x0000000000100000) <-
00000000fffc68b0
Clearing Segment: addr: 0x00000000000ef000 memsz: 0x0000000000011000
dest 000ef000, end 00100000, bouncebuffer 3fc8000
Loaded segments
Jumping to boot code at fc1ec
entry    = 0x000fc1ec
lb_start = 0x00100000
lb_size  = 0x0001c000
adjust   = 0x03ee4000
buffer   = 0x03fc8000
     elf_boot_notes = 0x0010c25c
adjusted_boot_notes = 0x03ff025c
-->> reboots

Now I'm concerned that this could be happening on the real board,too. I
already tried to compile seabios from the source same result.
I tried to use it with a linux.img to see if it boots but nothing! I'm
having the same problem with the "ready to use" coreboot v2 + SeaBios
from the coreboot wiki.

any suggestions? I have a coreboot + seabios compiled and ready to flash
it to the real board but I'm now scared like hell it just will boot and
boot.

thx,

Knut Kujat