[coreboot] [Fwd: Re: [Fwd: Re: [Fwd: Re: arima hdama problem]]]

Hugh Greenberg hng at lanl.gov
Wed Nov 4 22:48:44 CET 2009


Attached is the latest output.  I don't see the errors anymore.  I just 
tried booting Linux with the latest rom and it booted.

-- 
Hugh Greenberg



Myles Watson wrote:
>
>
> On Wed, Nov 4, 2009 at 12:06 PM, Hugh Greenberg <hng at lanl.gov 
> <mailto:hng at lanl.gov>> wrote:
>
>     Myles,
>
>     It worked.  Coreboot boots with SB_HT_CHAIN_ON_BUS_0 set to one
>     and the previous patch.  Seabios also detects the network devices
>     without setting CONFIG_PCI_ROOT1 to 0x02.  Attached is the output.
>      Seabios was compiled with DEBUG_LEVEL set to 8.
>
>
> ERROR - cound not find bus for node 0 chain 0, using defaults
> ERROR - could not find PCI 1:01.0, using defaults
> ERROR - could not find PCI 1:02.0, using defaults
> Wrote the mp table end at: 000f0410 - 000f05e4
> Adding CBMEM entry as no. 3
> Looking for bad PCIX MHz input
> Looking for bad Hot Swap Enable
> OK 133MHz & Hot Swap is off
> ERROR - cound not find bus for node 0 chain 0, using defaults
> ERROR - could not find PCI 1:01.0, using defaults
> ERROR - could not find PCI 1:02.0, using defaults
> Wrote the mp table end at: 3fff1410 - 3fff15e4
>
> It almost worked.  Can you try the attached patch?
>
> Is it actually booting into Linux?
>
> Thanks,
> Myles
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: minicom.cap
Type: application/cap
Size: 74028 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091104/447dc0ba/attachment.bin>


More information about the coreboot mailing list