[coreboot] [Fwd: Re: [Fwd: Re: [Fwd: Re: arima hdama problem]]]

Myles Watson mylesgw at gmail.com
Wed Nov 4 19:21:29 CET 2009


On Wed, Nov 4, 2009 at 12:06 PM, Hugh Greenberg <hng at lanl.gov> wrote:

> Myles,
>
> It worked.  Coreboot boots with SB_HT_CHAIN_ON_BUS_0 set to one and the
> previous patch.  Seabios also detects the network devices without setting
> CONFIG_PCI_ROOT1 to 0x02.  Attached is the output.  Seabios was compiled
> with DEBUG_LEVEL set to 8.
>

ERROR - cound not find bus for node 0 chain 0, using defaults
ERROR - could not find PCI 1:01.0, using defaults
ERROR - could not find PCI 1:02.0, using defaults
Wrote the mp table end at: 000f0410 - 000f05e4
Adding CBMEM entry as no. 3
Looking for bad PCIX MHz input
Looking for bad Hot Swap Enable
OK 133MHz & Hot Swap is off
ERROR - cound not find bus for node 0 chain 0, using defaults
ERROR - could not find PCI 1:01.0, using defaults
ERROR - could not find PCI 1:02.0, using defaults
Wrote the mp table end at: 3fff1410 - 3fff15e4

It almost worked.  Can you try the attached patch?

Is it actually booting into Linux?

Thanks,
Myles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091104/cee1d24f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: arima.diff
Type: text/x-patch
Size: 2517 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091104/cee1d24f/attachment.diff>


More information about the coreboot mailing list