[coreboot] [v2] ACPI on m57sli
Ronald Hoogenboom
ronald at zonnet.nl
Tue May 26 23:07:20 CEST 2009
Hi,
I've tried Harald Gutman's ACPI patch for gigabyte m57sli and I can
successfully boot Linux with it (straight from flash, 2MB), and, as a
bonus, the proprietary NVIDIA driver for X works too with full glx
acceleration, hurray!
There are still some errors in dmesg regarding ACPI, though, which is
probably why the powernow cpu frequency scaling doesn't work yet. Most
notably the FACP checksum is incorrect.
For some strange reason, the ethernet device is 'renamed' to eth1, eth0
doesn't work.
I've attached the output of dmesg.
-------------- next part --------------
Linux version 2.6.23.17-88.fc7 (ronald at amd-x2.grundel) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #2 SMP Sun May 24 23:21:47 CEST 2009
Command line: ro root=/dev/sda2 rhgb earlyprintk=serial,ttyS0,115200 console=ttyS0,115200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000001000 (reserved)
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000c0000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
console [earlyser0] enabled
Entering add_active_range(0, 1, 160) 0 entries of 3200 used
Entering add_active_range(0, 192, 524272) 1 entries of 3200 used
end_pfn_map = 524288
DMI not present or invalid.
ACPI: RSDP 000F0400, 0024 (r2 CORE )
ACPI: RSDT 7FFF0424, 0034 (r1 CORE RSDT 0 CORE 0)
ACPI: FACP 7FFF4A47, 004A (r1 GBT NVDAACPI 0 NVDA 11BE2F)
ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] - 1A, should be 83 [20070126]
ACPI Error (tbfadt-0428): Required field "Pm1aEventBlock" has zero address and/or length: 0000000000002000/0 [20070126]
ACPI Error (tbfadt-0428): Required field "Pm1aControlBlock" has zero address and/or length: 0000000000002004/0 [20070126]
ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 000000000000201C/0 [20070126]
ACPI Error (tbfadt-0428): Required field "PmTimerBlock" has zero address and/or length: 0000000000000000/0 [20070126]
ACPI: DSDT 7FFF04AC, 459B (r1 GBT NVDAACPI 1000 INTL 20061109)
ACPI: FACS 7FFF046C, 0040
ACPI: APIC 7FFF4B3B, 007C (r1 CORE MADT 0 CORE 0)
ACPI: MCFG 7FFF4BB7, 002C (r1 CORE MCFG 0 CORE 0)
ACPI: SRAT 7FFF4BE3, 00A0 (r1 CORE SRAT 0 CORE 0)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 1, 160) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 1, 160) 1 entries of 3200 used
Entering add_active_range(0, 192, 524272) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000007fff0000
Zone PFN ranges:
DMA 1 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 1 -> 160
0: 192 -> 524272
On node 0 totalpages: 524239
DMA zone: 55 pages used for memmap
DMA zone: 1374 pages reserved
DMA zone: 2634 pages, LIFO batch:0
DMA32 zone: 7111 pages used for memmap
DMA32 zone: 513065 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] - 1A, should be 83 [20070126]
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xf7244000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xf7244000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c0000
Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 40664 bytes of per cpu data
Built 1 zonelists in Node order. Total pages: 515699
Policy zone: DMA32
Kernel command line: ro root=/dev/sda2 rhgb earlyprintk=serial,ttyS0,115200 console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2800.017 MHz processor.
Console: colour VGA+ 80x25
console handover: boot [earlyser0] -> real [ttyS0]
Checking aperture...
CPU 0: aperture @ f0000000 size 64 MB
Memory: 2062516k/2097088k available (2591k kernel code, 34440k reserved, 1499k data, 304k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5602.57 BogoMIPS (lpj=2801285)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12500085
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5599.24 BogoMIPS (lpj=2799622)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2080 bytes
Time: 20:18:25 Date: 05/26/09
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI Error (evevent-0305): No installed handler for fixed event [00000000] [20070126]
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *3
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *4
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *6
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *6
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *3
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *4
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *2
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *2
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *1
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *1
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *8
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *1
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 15) *13
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] - 1A, should be 83 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:0d: iomem range 0xf0000000-0xf7ffffff could not be reserved
pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: f7100000-f71fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: 1000-1fff
MEM window: f4000000-f70fffff
PREFETCH window: e0000000-efffffff
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1243369104.744:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 1019C3E54CBE9226
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:07:00.0
PCI: Setting latency timer of device 0000:00:0a.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /class/input/input0
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:05.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma 0x0000000000012cd0 irq 23
ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma 0x0000000000012cd8 irq 23
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:05.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma 0x0000000000012ce0 irq 22
ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma 0x0000000000012ce8 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: Host Protected Area detected:
current size: 625140335 sectors
native size: 625142448 sectors
ata4.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
ata4.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata4.00: Host Protected Area detected:
current size: 625140335 sectors
native size: 625142448 sectors
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda4
sd 3:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:05.2 to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma 0x0000000000012cf0 irq 21
ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma 0x0000000000012cf8 irq 21
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:04.0: version 0.3.9
PCI: Setting latency timer of device 0000:00:04.0 to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000012cc0 irq 14
ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000012cc8 irq 15
ata8: port disabled. ignoring.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
Magic number: 9:341:347
hash matches device pci0000:00
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 304k freed
Write protecting the kernel read-only data: 1128k
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1243369108.449:2): selinux=0 auid=4294967295
register_blkdev: cannot get major 8 for sd
register_blkdev: cannot get major 65 for sd
register_blkdev: cannot get major 66 for sd
register_blkdev: cannot get major 67 for sd
register_blkdev: cannot get major 68 for sd
register_blkdev: cannot get major 69 for sd
register_blkdev: cannot get major 70 for sd
register_blkdev: cannot get major 71 for sd
register_blkdev: cannot get major 128 for sd
register_blkdev: cannot get major 129 for sd
register_blkdev: cannot get major 130 for sd
register_blkdev: cannot get major 131 for sd
register_blkdev: cannot get major 132 for sd
register_blkdev: cannot get major 133 for sd
register_blkdev: cannot get major 134 for sd
register_blkdev: cannot get major 135 for sd
sd 3:0:0:0: Attached scsi generic sg0 type 0
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xf724a000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
pnp: Device 00:0a activated.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2c40
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2c80
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xf7245000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
input: PC Speaker as /class/input/input3
input: Power Button (FF) as /class/input/input4
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (FF) as /class/input/input5
ACPI: Sleep Button (FF) [SLPF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
nvidia: module license 'NVIDIA' taints kernel.
firewire_core: created device fw0: GUID 001a4d5600ec9652, S400
eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:06.1 to 64
net eth1: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth0 to eth1
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:07:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
floppy0: no floppy controllers found
EXT3 FS on sda2, internal journal
Adding 2097136k swap on /dev/sda4. Priority:-1 extents:1 across:2097136k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
audit(1243369122.637:3): audit_pid=1596 old=0 by auid=4294967295
fuse init (API version 7.8)
it87: Found IT8716F chip at 0x290, revision 0
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
More information about the coreboot
mailing list