[coreboot] jarrell_rom_jumper.c ( I think I found it )

Joshua McDowell JMcDowell at ISSISolutions.com
Thu May 21 19:11:15 CEST 2009

  So I ran built and then ran the program on a running node.  I got the following output.
Current jumper state: Low.       -- 2 to 3
  I then ran flashrom with no change.

Joshua McDowell
  - Lead integrator

Sent from my Blackberry

-----Original Message-----
From: Myles Watson <mylesgw at gmail.com>

Date: Thu, 21 May 2009 10:45:45 
To: ron minnich<rminnich at gmail.com>
Cc: Joshua McDowell<jmcdowell at issisolutions.com>; Carl-Daniel Hailfinger<c-d.hailfinger.devel.2006 at gmx.net>; <coreboot at coreboot.org>
Subject: Re: [coreboot] jarrell_rom_jumper.c ( I think I found it )

On Thu, May 21, 2009 at 9:44 AM, ron minnich <rminnich at gmail.com> wrote:
> I think this file is the key to writing the flash. This is how we used
> to do write enables before mainboard support went into flashrom.

So the next thing for Joshua to do is compile this file and run it
before running flashrom again, right?


coreboot mailing list: coreboot at coreboot.org

More information about the coreboot mailing list