[coreboot] #137: S2895 no function after coreboot 2 flash

coreboot svn at coreboot.org
Tue May 19 18:26:02 CEST 2009

#137: S2895 no function after coreboot 2 flash
    Reporter:  anonymous  |          Type:  defect           
      Status:  new        |      Priority:  major            
   Milestone:             |     Component:  buildrom         
     Version:  v2         |      Keywords:                   
Dependencies:             |   Patchstatus:  there is no patch

Comment(by anonymous):

 Hi Myles,

 Thanks a lot for your fast response.
 So you are saying that the problem seems to be that i am using a SATA HDD?
 That could explain a lot. i will try doing an Windows installation on the
 IDE drive and see if the problem will then be resolved.

 About my current config:

 I am using the TYAN S2895 with 2 SATA HDDs. first one has Windows on it
 and the second one is using Suse 11.1. Grub is installed on the first SATA
 HDD with the Windows.

 Any chance to get both OS to work at the same time?

 However i will try with an IDE HDD and Windows via seabios first ;-)


Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/137#comment:3>
coreboot <http://www.coreboot.org/>

More information about the coreboot mailing list