[coreboot] SeaBIOS not running vga rom

Joseph Smith joe at settoplinux.org
Tue May 12 14:02:21 CEST 2009

On Tue, 12 May 2009 12:53:43 +0200, Rudolf Marek <r.marek at assembler.cz>
> Hi,
> You can either use LGPL VGA bios from http://www.nongnu.org/vgabios/ (use
> only image) or you can use vga bios from kevin just right in the Seabios.
I don't know if this is an option, I don't want it to mess with any of the
vga registers already set by coreboot.

> But if you dont need any - I use SeaBIOS without any option ROMs and it
> works
> too. (grub boots and boots kernel)
Ok, but do you have vga output or just serial console.
Will SeaBIOS know vga has already been initialized and send output to the
vga screen?

Joseph Smith

More information about the coreboot mailing list