[coreboot] [dbm690t] The new acpi table doesn't seem to be correct.
Bao, Zheng
Zheng.Bao at amd.com
Tue May 12 10:38:22 CEST 2009
Hi, all,
The new auto-generated acpi table doesn't seem to be correct on dbm690t.
Dose anybody have any idea?
Joe
Please check the dmesg:
Booting 'Ubuntu 8.04, kernel 2.6.24-amd2-generic-serial'
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-amd2-generic
root=UUID=7bb9e8a5-cbc0-4104-92a3-628
f56924494 ro console=ttyS0,115200
initrd /boot/initrd.img-2.6.24-amd2-generic
Booting 'hda1:/boot/vmlinuz-2.6.24-amd2-generic
root=UUID=7bb9e8a5-cbc0-4104-92
a3-628f56924494 ro console=ttyS0,115200
initrd=/boot/initrd.img-2.6.24-amd2-gen
eric'
Mounted EXT2 filesystem
Mounted EXT2 filesystem
Found Linux version 2.6.24-amd2-generic (root at forsteri) #1 SMP Tue Jul
15 22:02:29 UTC 2008 bzI
mage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
[ 0.000000] Linux version 2.6.24-amd2-generic (root at forsteri) (gcc
version 4.2.3 (Ubuntu 4.2
.3-2ubuntu7)) #1 SMP Tue Jul 15 22:02:29 UTC 2008 (Ubuntu
2.6.24-amd2.2-generic)
[ 0.000000] Command line:
root=UUID=7bb9e8a5-cbc0-4104-92a3-628f56924494 ro console=ttyS0,11
5200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
[ 0.000000] end_pfn_map = 16384
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F0400 checksum 0
[ 0.000000] ACPI: RSDP 000F0400, 0024 (r2 CORE )
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000004000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000004000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 16384
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: ATI MPTABLE: Product ID: DBM690T
MPTABLE: APIC at: 0x
FEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 2
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap:
4000000:fc000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 14857
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
root=UUID=7bb9e8a5-cbc0-4104-92a3-628f56924494 ro console=t
tyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 256 (order: 8, 2048 bytes)
[ 0.000000] TSC calibrated against PIT
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 2100.115 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 51848k/65536k available (2466k kernel code,
13304k reserved, 1313k data,
316k init)
[ 0.000000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 0.000000] Calibrating delay using timer specific routine.. 4203.67
BogoMIPS (lpj=8407353)
[ 0.000000] Security Framework initialized
[ 0.000000] SELinux: Disabled at boot.
[ 0.000000] AppArmor: AppArmor initialized
[ 0.000000] Failure registering capabilities with primary security
module.
[ 0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.000000] Mount-cache hash table entries: 256
[ 0.000000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.000000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000000] CPU 0/0 -> Node 0
[ 0.000000] CPU: Physical Processor ID: 0
[ 0.000000] CPU: Processor Core ID: 0
[ 0.000000] SMP alternatives: switching to UP code
[ 0.000000] Early unpacking initramfs... done
[ 0.000000] ACPI: Core revision 20070126
[ 0.000000] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While
loading namespace from A
CPI tables [20070126]
[ 0.000000] ACPI: Unable to load the System Description Tables
[ 0.000000] ExtINT not setup in hardware but reported by MP table
[ 0.000000] Using local APIC timer interrupts.
[ 0.000000] Detected 12.500 MHz APIC timer.
[ 0.000000] SMP alternatives: switching to SMP code
[ 0.000000] Booting processor 1/2 APIC 0x1
[ 0.000000] Initializing CPU#1
[ 0.000000] Calibrating delay using timer specific routine.. 4200.24
BogoMIPS (lpj=8400480)
[ 0.000000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.000000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000000] CPU 1/1 -> Node 0
[ 0.000000] CPU: Physical Processor ID: 0
[ 0.000000] CPU: Processor Core ID: 1
[ 0.000000] AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02
[ 0.000000] Brought up 2 CPUs
[ 0.000000] net_namespace: 120 bytes
[ 0.000000] Time: 4:46:48 Date: 04/13/09
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] PCI: Using configuration type 1
[ 0.000000] ACPI: Interpreter disabled.
[ 0.000000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.000000] pnp: PnP ACPI: disabled
[ 0.000000] PCI: Probing PCI hardware
[ 0.000000] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.000000] PCI: Transparent bridge - 0000:00:14.4
[ 0.000000] PCI: Using IRQ router default [1002/4384] at 0000:00:14.4
[ 0.000000] PCI: Cannot allocate resource region 0 of device
0000:05:00.0
[ 0.000000] NET: Registered protocol family 8
[ 0.000000] NET: Registered protocol family 20
[ 0.000000] AppArmor: AppArmor Filesystem Enabled
[ 0.000000] PCI: Bridge: 0000:00:01.0
[ 0.000000] IO window: 1000-1fff
[ 0.000000] MEM window: fc000000-fc1fffff
[ 0.000000] PREFETCH window: f0000000-f7ffffff
[ 0.000000] PCI: Bridge: 0000:00:04.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:05.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:06.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:07.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: 10000000-100fffff
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:14.4
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Enabling device 0000:00:07.0 (0000 -> 0002)
[ 0.000000] NET: Registered protocol family 2
[ 0.000000] IP route cache hash table entries: 512 (order: 0, 4096
bytes)
[ 0.000000] TCP established hash table entries: 2048 (order: 3, 32768
bytes)
[ 0.000000] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.000000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.000000] TCP reno registered
[ 0.000000] checking if image is initramfs... it is
[ 0.000000] Freeing initrd memory: 7452k freed
[ 0.000000] audit: initializing netlink socket (disabled)
[ 0.000000] audit(1239598008.456:1): initialized
[ 0.000000] VFS: Disk quotas dquot_6.5.1
[ 0.000000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.000000] io scheduler noop registered
[ 0.000000] io scheduler anticipatory registered
[ 0.000000] io scheduler deadline registered
[ 0.000000] io scheduler cfq registered (default)
[ 0.000000] assign_interrupt_mode Found MSI capability
[ 0.000000] assign_interrupt_mode Found MSI capability
[ 0.000000] assign_interrupt_mode Found MSI capability
[ 0.000000] assign_interrupt_mode Found MSI capability
[ 0.000000] Real Time Clock Driver v1.12ac
[ 0.000000] Linux agpgart interface v0.102
[ 0.000000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 0.000000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.000000] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 0.000000] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.000000] PNP: No PS/2 controller found. Probing ports directly.
[ 0.000000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.000000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.000000] mice: PS/2 mouse device common for all mice
[ 0.000000] cpuidle: using governor ladder
[ 0.000000] cpuidle: using governor menu
[ 0.000000] NET: Registered protocol family 1
[ 0.000000] registered taskstats version 1
[ 0.000000] Magic number: 5:620:767
[ 0.000000] hash matches device ptyp3
[ 0.000000]
/root/build/ubuntu/linux-source/linux-source/drivers/rtc/hctosys.c:
unable to op
en rtc device (rtc0)
[ 0.000000] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.000000] EDD information not available.
[ 0.000000] Freeing unused kernel memory: 316k freed
Loading, please wait...
Begin: Loading essential drivers... ...
[ 0.000000] thermal: Unknown symbol acpi_processor_set_thermal_limit
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
[ 0.000000] tg3.c:v3.86 (November 9, 2007)
Begin: Waiting f[ 0.000000] PCI: Enabling device 0000:05:00.0 (0000
-> 0002)
or root file sys[ 0.000000] PCI: No IRQ known for interrupt pin A of
device 0000:05:00.0. Pr
obably buggy MP table.
tem... ...
[ 0.000000] SCSI subsystem initialized
[ 0.000000] tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
[ 0.000000] tg3: (0000:05:00.0) phy probe failed, err -19
[ 0.000000] tg3: Problem fetching invariants of chip, aborting.
[ 0.000000] usbcore: registered new interface driver usbfs
[ 0.000000] usbcore: registered new interface driver hub
[ 0.000000] usbcore: registered new device driver usb
[ 0.000000] scsi0 : pata_atiixp
[ 0.000000] scsi1 : pata_atiixp
[ 0.000000] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2010
irq 14
[ 0.000000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2018
irq 15
[ 0.000000] PCI: No IRQ known for interrupt pin A of device
0000:00:12.0. Probably buggy MP
table.
[ 0.000000] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing
32bit
[ 0.000000] ahci 0000:00:12.0: controller can't do PMP, turning off
CAP_PMP
[ 0.000000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
0xf impl SATA mode
[ 0.000000] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio
slum part
[ 0.000000] WARNING: at
/root/build/ubuntu/linux-source/linux-source/drivers/ata/libata-core
.c:7238 ata_host_activate()
[ 0.000000] Pid: 1291, comm: modprobe Not tainted 2.6.24-amd2-generic
#1
[ 0.000000]
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8807135e>]
:libata:ata_host_activate+0x13e/0x140
[ 0.000000] [<ffffffff880cabc8>] :ahci:ahci_init_one+0x988/0xb80
[ 0.000000] [<ffffffff803588b8>] pci_device_probe+0xf8/0x170
[ 0.000000] [<ffffffff803b9fcc>] driver_probe_device+0x9c/0x1b0
[ 0.000000] [<ffffffff803ba299>] __driver_attach+0xc9/0xd0
[ 0.000000] [<ffffffff803ba1d0>] __driver_attach+0x0/0xd0
[ 0.000000] [<ffffffff803b920d>] bus_for_each_dev+0x4d/0x80
[ 0.000000] [<ffffffff803b961c>] bus_add_driver+0xac/0x220
[ 0.000000] [<ffffffff80358b39>] __pci_register_driver+0x69/0xb0
[ 0.000000] [<ffffffff80263b6e>] sys_init_module+0x18e/0x1a90
[ 0.000000] [<ffffffff8020c37e>] system_call+0x7e/0x83
[ 0.000000]
[ 0.000000] scsi2 : ahci
[ 0.000000] scsi3 : ahci
[ 0.000000] scsi4 : ahci
[ 0.000000] scsi5 : ahci
[ 0.000000] ata3: SATA max UDMA/133 abar m1024 at 0xfc209000 port
0xfc209100
[ 0.000000] ata4: SATA max UDMA/133 abar m1024 at 0xfc209000 port
0xfc209180
[ 0.000000] ata5: SATA max UDMA/133 abar m1024 at 0xfc209000 port
0xfc209200
[ 0.000000] ata6: SATA max UDMA/133 abar m1024 at 0xfc209000 port
0xfc209280
[ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.000000] ata3.00: qc timeout (cmd 0xec)
[ 0.000000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 0.000000] ata3: failed to recover some devices, retrying in 5 secs
[ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.000000] ata3.00: qc timeout (cmd 0xec)
[ 0.000000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 0.000000] ata3: failed to recover some devices, retrying in 5 secs
[ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.000000] ata3.00: qc timeout (cmd 0xec)
[ 0.000000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 0.000000] ata3: failed to recover some devices, retrying in 5 secs
[ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.000000] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.000000] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.000000] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.000000] PCI: No IRQ known for interrupt pin A of device
0000:00:13.0. Probably buggy MP
table.
[ 0.000000] ohci_hcd 0000:00:13.0: Found HC with no IRQ. Check
BIOS/PCI 0000:00:13.0 setup!
[ 0.000000] ohci_hcd 0000:00:13.0: init 0000:00:13.0 fail, -19
[ 0.000000] PCI: No IRQ known for interrupt pin B of device
0000:00:13.1. Probably buggy MP
table.
[ 0.000000] ohci_hcd 0000:00:13.1: Found HC with no IRQ. Check
BIOS/PCI 0000:00:13.1 setup!
[ 0.000000] ohci_hcd 0000:00:13.1: init 0000:00:13.1 fail, -19
[ 0.000000] PCI: No IRQ known for interrupt pin C of device
0000:00:13.2. Probably buggy MP
table.
[ 0.000000] ohci_hcd 0000:00:13.2: Found HC with no IRQ. Check
BIOS/PCI 0000:00:13.2 setup!
[ 0.000000] ohci_hcd 0000:00:13.2: init 0000:00:13.2 fail, -19
[ 0.000000] PCI: No IRQ known for interrupt pin B of device
0000:00:13.3. Probably buggy MP
table.
[ 0.000000] ohci_hcd 0000:00:13.3: Found HC with no IRQ. Check
BIOS/PCI 0000:00:13.3 setup!
[ 0.000000] ohci_hcd 0000:00:13.3: init 0000:00:13.3 fail, -19
[ 0.000000] PCI: No IRQ known for interrupt pin C of device
0000:00:13.4. Probably buggy MP
table.
[ 0.000000] ohci_hcd 0000:00:13.4: Found HC with no IRQ. Check
BIOS/PCI 0000:00:13.4 setup!
[ 0.000000] ohci_hcd 0000:00:13.4: init 0000:00:13.4 fail, -19
[ 0.000000] PCI: No IRQ known for interrupt pin D of device
0000:00:13.5. Probably buggy MP
table.
[ 0.000000] ehci_hcd 0000:00:13.5: Found HC with no IRQ. Check
BIOS/PCI 0000:00:13.5 setup!
[ 0.000000] ehci_hcd 0000:00:13.5: init 0000:00:13.5 fail, -19
[ 0.000000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 0.000000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls /dev
ALERT! /dev/disk/by-uuid/7bb9e8a5-cbc0-4104-92a3-628f56924494 does not
exist. Dropping to a she
ll!
More information about the coreboot
mailing list