[coreboot] Board enable for Epox 8K5A2.

[Luc Verhaegen]

On Thu, May 07, 2009 at 07:14:03PM +0200, Luc Verhaegen wrote:
> I didn't prepend this with [PATCH] yet, as i still need to verify this 
> change on an epia-m with its original bios...
> 
> This patch adds support for the Epox 8k5a2 motherboard as owned by Kevin 
> Sopp (CC). His lspci is attached for future reference. Kevin still needs 
> to try this code too. His board is properly matched by pci subsystem 
> ids, as there is one proper epox id in there, and the other id was 
> copied from the device id (which is already better than leaving it 
> blank).

Kevin just confirmed on irc that this is working for his board. The 
epia-m test will sadly have to wait until tomorrow.

Luc Verhaegen.