[coreboot] IRQ 9 on s2895 and s2892

Myles Watson mylesgw at gmail.com
Wed Mar 18 21:53:30 CET 2009

On Mon, Mar 16, 2009 at 3:27 PM, Rudolf Marek <r.marek at assembler.cz> wrote:
>> I tried setting it to pin2.  It reboots when it jumps to the payload.

Sorry.  This was the -fomit-frame-pointer error.  It just happened to
be the time I did make clean.

I just tried it again and I no longer get

 spurious 8259A interrupt: IRQ7.

That seems like a good thing.  Interestingly enough, the factory BIOS
has the spurious interrupt too.

IRQ 9 wasn't being set up correctly in the southbridge.  I set a
nibble to 9 and now it works.

Next I'll try XP again.


More information about the coreboot mailing list