[coreboot] Intel Eagle Height evaluation board support

[Kevin O'Connor]

On Wed, Jun 24, 2009 at 02:34:10PM +0200, Thomas JOURDAN wrote:
> >> I forgot to mention that also tried seabios without success.
> 
> I attached a log file for seabios.

[...]
> Scan for VGA option rom
> Attempting to init PCI bdf 03:00.0 (dev/ven 2527102b)
> Searching CBFS for data file pci102b,2527.rom
> Found CBFS file fallback/payload
> Found CBFS file fallback/coreboot_ram
> Found CBFS file 
> Attempting to map option rom on dev 03:00.0
> Option rom sizing returned fe800000 fffe0000
> Inspecting possible rom at 0xfe800000 (dv=2527102b bdf=300)
> Copying option rom (size 36864) from 0xfe800000 to c0000
> Checking rom 0x000c0000 (sig aa55 size 72)
> Running option rom at c000:0003
> enter handle_1a:
>    a=0000b102  b=0000ffff  c=00001541  d=000010b9 ds=0000 es=0000 ss=0000
>   si=00000000 di=000000f8 bp=00000000 sp=00007a6e cs=c000 ip=8125  f=0086
> fail handle_1ab102:55(86):
>    a=0000b102  b=0000ffff  c=00001541  d=000010b9 ds=0000 es=0000 ss=0000
>   si=00000000 di=000000f8 bp=00000000 sp=00007a6e cs=c000 ip=8125  f=0086

This is a bios request to find the pci device 102b:1541.  Your machine
doesn't appear to have this device, so an error return is appropriate.
(The warning just states that seabios is returning an error code to
the caller - it doesn't necessarily indicate a problem.)

The above all looks normal.

[...]
> enter handle_16:
>    a=00000100  b=00000000  c=00000000  d=00000000 ds=0000 es=0000 ss=0000
>   si=00000000 di=00000000 bp=00000000 sp=00007af8 cs=f000 ip=ff50  f=0002
> enter handle_15:
>    a=00008600  b=00000000  c=00000000  d=0000c350 ds=0000 es=0000 ss=0000
>   si=00000000 di=00000000 bp=00000000 sp=00007af8 cs=f000 ip=e726  f=0002
> enter handle_16:
>    a=00000100  b=00000000  c=00000000  d=00000000 ds=0000 es=0000 ss=0000
>   si=00000000 di=00000000 bp=00000000 sp=00007af8 cs=f000 ip=ff50  f=0002
> enter handle_15:
>    a=00008600  b=00000000  c=00000000  d=0000c350 ds=0000 es=0000 ss=0000
>   si=00000000 di=00000000 bp=00000000 sp=00007af8 cs=f000 ip=e726  f=0002
> ...
> INT 15/16 endless
> ...

This is just the result of a very high debug level.  Try lowering the
debug level to 6.

-Kevin