[coreboot] [PATCH] Add support for the Soyo SY-6BA+ III board

Andrew Morgan ziltro at ziltro.com
Wed Jun 24 01:25:51 CEST 2009

Uwe Hermann wrote:
> Hi,
> On Sat, Jun 20, 2009 at 02:34:24AM +0100, Andrew Morgan wrote:
>> Here is the output of 'lspci -tvnn', 'superiotool -dV', 'getpir',
>> and 'mptable' run on the (beautifully named) Soyo SY-6BA+ III
>> motherboard.
> Thanks, please see attached patch for a first attempt at a coreboot
> port. The board is (of course) similar to all other 440BX boards in
> svn. I used 256 KB as ROM chip size, is that correct for your board?
> Also, the Realtek NIC is onboard I assume? Or is it PCI? I assumed
> onboard for now.

Acked-by: Andrew Morgan <ziltro at ziltro.com>

It boots FILO > Linux!

ROM size is correct.
NIC is not on-board, it is a PCI card.
FILO was too large for a 256 KB ROM to be included with both "normal" 
and "fallback" images, only tested with "fallback".



More information about the coreboot mailing list