[coreboot] Does the fam10 code work now?

Marc Jones marcj303 at gmail.com
Fri Jun 19 06:16:38 CEST 2009

On Thu, Jun 18, 2009 at 9:07 PM, Bao, Zheng<Zheng.Bao at amd.com> wrote:
> 1. The processor I work on is Socket AM2r2. Is it supported?
I only used socket F. You might need to to make some adjustments for AM2.

> 2. The board I work on is Fam10(AM2r2)+RS780+SB700, somehow like
> dbm690t. what is the configuration in Option.lb. HT_CHAIN_UNITID_BASE?
> HT_CHAIN_END_UNITID_BASE? I am still confused about these settings.
It depends on the chipset and board configuration. You should be able
to set that the same as the dbm690T.

> 3. If the HT can not be configured to HT3 mode, can the MCT be set at
> high speed?
I think it should work at HT1 speeds. I don't know how closely they
are really connected. The HT just needs to be setup before memory. Is
there more than one CPU? Can the 780 do HT3?



More information about the coreboot mailing list