[coreboot] [PATCH] flashrom: Albatron PM266A board enable.

[Luc Verhaegen]

Add board enable for Albatron PM266A boards.

There are multiple albatron pm266a boards which all share the same bios
image. This means that both the board enable and the subsystem ids are
exactly the same.

The board enable is the same as the epox EP-8K5A2, namely only raising
memw on the superio.

Signed-off-by: Luc Verhaegen <libv at skynet.be>
Index: board_enable.c
===================================================================
--- board_enable.c	(revision 580)
+++ board_enable.c	(working copy)
@@ -685,6 +685,7 @@
 	/* first pci-id set [4],          second pci-id set [4],          coreboot id [2],             vendor name    board name            flash enable */
 	{0x8086, 0x1130,      0,      0,  0x105a, 0x0d30, 0x105a, 0x4d33, "acorp",      "6a815epd",    "Acorp",       "6A815EPD",           board_acorp_6a815epd},
 	{0x1022, 0x746B, 0x1022, 0x36C0,       0,      0,      0,      0, "AGAMI",      "ARUMA",       "agami",       "Aruma",              w83627hf_gpio24_raise_2e},
+	{0x1106, 0x3177, 0x17F2, 0x3177,  0x1106, 0x3148, 0x17F2, 0x3148, NULL,         NULL,          "Albatron",    "PM266A",             board_epox_ep_8k5a2},
 	{0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, "artecgroup", "dbe61",       "Artec Group", "DBE61",              board_artecgroup_dbe6x},
 	{0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, "artecgroup", "dbe62",       "Artec Group", "DBE62",              board_artecgroup_dbe6x},
 	{0x1106, 0x3177, 0x1043, 0x80A1,  0x1106, 0x3205, 0x1043, 0x8118, NULL,         NULL,          "ASUS",        "A7V8-MX SE",         board_asus_a7v8x_mx},