[coreboot] build service results for r4344

[coreboot information]

Dear coreboot readers!

This is the automatic build system of coreboot.

The developer "oxygene" checked in revision 4344 to
the coreboot repository. This caused the following 
changes:

Change Log:
Change the CBFS build process to use coreboot.rom
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.

This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.

Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
  crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
  as it's done everywhere else
- change the default config of abuild to not
  provide ROM_IMAGE_SIZE values for the images
  in a CBFS configuration
- change abuild's crosscompile autodetection to
  not try to use "i386-elf-i386-elf-gcc" (which
  is bogus)

Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS

The changes in util/abuild/abuild are trivial and
abuild tested.

As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.

Signed-off-by: Patrick Georgi <patrick.georgi at coresystems.de>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>


Build Log:
Configuration of via:epia-m700 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4344&device=epia-m700&vendor=via&num=1


If something broke during this checkin please be a pain 
in oxygene's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     coreboot automatic build system