[coreboot] build service results for r4398

coreboot information info at coresystems.de
Sun Jul 5 18:12:21 CEST 2009

Dear coreboot readers!

This is the automatic build system of coreboot.

The developer "uwe" checked in revision 4398 to
the coreboot repository. This caused the following 

Change Log:
Various Intel 82810/82810E changes which allow onboard VGA to work.
At the same time also make the 82810 code handle 82810E.

 - Set SMRAM register according to CONFIG_VIDEO_MB value:
    - 512 means 512 KB
    - 1 means 1 MB
    - Every other value for CONFIG_VIDEO_MB (e.g. 0) disables VGA.
   This is not very clean, changing CONFIG_VIDEO_MB to CONFIG_VIDEO_KB
   in a future patch may be nicer.

 - Set MISSC2 register bits as required per datasheet to make VGA work.
   The code handles both 82810 and 82810E.

 - northbridge.c: Add __pci_driver entry for the Intel 82810E.


 - Rename PAM register #define to PAMR as per datasheet.

 - Drop unused/commented code for now.

 - Don't explicitly set GMCHCFG for now, the default works ok. We'll
   have to figure out the proper/ideal settings later.

The code is based on a patch from Elia Yehuda <z4ziggy at gmail.com> but
has been modified quite a bit for correctness and minimalism.

Tested on hardware with a slightly modified MS-6178 target,
patches to enable onboard-VGA for MS-6178 will follow.

Signed-off-by: Elia Yehuda <z4ziggy at gmail.com>
Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>

Build Log:
Compilation of asus:mew-am has been broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=mew-am&vendor=asus&num=2
Compilation of asus:mew-vm has been broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=mew-vm&vendor=asus&num=2
Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=sandpointx3_altimus_mpc7410&vendor=motorola&num=2
Compilation of msi:ms6178 has been broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=ms6178&vendor=msi&num=2
Compilation of nec:powermate2000 has been broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=powermate2000&vendor=nec&num=2
Compilation of via:epia-m700 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=epia-m700&vendor=via&num=2

If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     coreboot automatic build system

More information about the coreboot mailing list