[coreboot] FlashROM on VIA EPIA EN12000EG

Uwe Hermann uwe at hermann-uwe.de
Fri Jul 3 18:12:23 CEST 2009

On Sat, Jun 20, 2009 at 03:00:22PM +0200, Peter Stuge wrote:
> Sebastian Schuberth wrote:
> > I don't know if it's even technically possible to distinguish the
> > CN and EN series, or if they are simply too close / almost
> > identical from a chipset etc. view,
> Yep, they are.
> > but I'd be happy to help out improving this, if I can.
> I think the solution is to just change the string, since the code
> does what it should.

Yeah, by now I agree that we'll want to use more generic names for the
board enable (-m) option, e.g. "epia-mxxx" or so.

However, the -L and -z flashrom output of tested/supported boards should
list the exact names of the tested boards. I have a patch in preparation
to do that, will send soonish.

Sebastian, if you have a chance to test whether write/erase works fine
on your board, please let us know so we can add "VIA EPIA EN12000EG"
as supported / not supported.

Please only try to erase/write if you have a way to recover (backup chip etc).

http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

More information about the coreboot mailing list