[coreboot] build service results for r4393

coreboot information info at coresystems.de
Thu Jul 2 20:48:58 CEST 2009


Dear coreboot readers!

This is the automatic build system of coreboot.

The developer "ward" checked in revision 4393 to
the coreboot repository. This caused the following 
changes:

Change Log:

Convert Supermicro H8DMR to CBFS. Also clean up some whitespace in
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb.

Importantly, this also sets

  default CONFIG_AP_CODE_IN_CAR=0

in

  src/mainboard/supermicro/h8dmr/Options.lb

which is required to make this box boot since the changes that went in in
r4315.

At Myles' suggestion, this patch also sets

  default CONFIG_USE_FAILOVER_IMAGE=0
  default CONFIG_USE_FALLBACK_IMAGE=0
  default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE

in src/mainboard/supermicro/h8dmr/Options.lb to simplify
targets/supermicro/h8dmr/Config.lb a bit further.

Build tested with abuild, boot tested on physical hardware.

Signed-off-by: Ward Vandewege <ward at gnu.org>
Acked-by: Myles Watson <mylesgw at gmail.com>



Build Log:
Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4393&device=sandpointx3_altimus_mpc7410&vendor=motorola&num=2
Compilation of via:epia-m700 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4393&device=epia-m700&vendor=via&num=2


If something broke during this checkin please be a pain 
in ward's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     coreboot automatic build system






More information about the coreboot mailing list