[coreboot] ACPI on m57sli v1.0
Andreas B. Mundt
andi.mundt at web.de
Wed Jul 1 16:21:39 CEST 2009
Hi everybody,
with the help of Harald's seaBIOS-payload I managed to run the latest
coreboot (revision 4387) on my v1.0 m57sli-board. From a first look
everything seems to work: kvm, sound, power-now frequency scaling.
dmesg is attached for proprietary and free bios.
Minor issues:
coreboot ACPI:
hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
hda: UDMA/33 mode selected
[...]
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0x9
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: ph2 null fid transition 0x11
proprietary:
hda: UDMA/66 mode selected
[...]
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0x9
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
Many thanks to everybody involved! I'll run my board now fulltime coreboot!
Regards Andi
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-17) (dannf at debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:47:08 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-amd64 root=UUID=3f46729c-a47e-4b29-a5a6-6bbe2e6cc7a4 ro vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1310720
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FD5F0, 0024 (r2 CORE )
[ 0.000000] ACPI: RSDT BFFF0424, 0040 (r1 CORE RSDT 0 CORE 0)
[ 0.000000] ACPI: FACP BFFF0F10, 00F4 (r1 GBT COREBOOT 0 CORE 2A)
[ 0.000000] ACPI: DSDT BFFF04C0, 0A50 (r1 LXBIOS LXB-DSDT 1 INTL 20061109)
[ 0.000000] ACPI: FACS BFFF0480, 0040
[ 0.000000] ACPI: HPET BFFF1004, 0038 (r1 CORE AMD64 0 CORE 0)
[ 0.000000] ACPI: APIC BFFF103C, 0068 (r1 CORE MADT 0 CORE 0)
[ 0.000000] ACPI: MCFG BFFF10A4, 002C (r1 CORE MCFG 0 CORE 0)
[ 0.000000] ACPI: SRAT BFFF10D0, 00C8 (r1 CORE SRAT 0 CORE 0)
[ 0.000000] ACPI: SLIT BFFF1198, 002D (r1 CORE SLIT 0 CORE 0)
[ 0.000000] ACPI: SSDT BFFF11C5, 037A (r2 CORE DYNADATA 2A GENA 2A)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used
[ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000
[ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
[ 0.000000] NUMA: Allocated memnodemap from d000 - f880
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000f880 - 000000000001487f]
[ 0.000000] bootmap [0000000000015000 - 000000000003cfff] pages 28
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3773a000-37fefd6d] RAMDISK
[ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-cfff] PGTABLE
[ 0.000000] early res: 6 [d000-f87f] MEMNODEMAP
[ 0.000000] [ffffe20000000000-ffffe20003bfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ 0.000000] [ffffe20003c00000-ffffe200045fffff] PMD -> [ffff81000c000000-ffff81000c9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1310720
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 786416
[ 0.000000] 0: 1048576 -> 1310720
[ 0.000000] On node 0 totalpages: 1048463
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1247 pages reserved
[ 0.000000] DMA zone: 2696 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 768040 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xf6244000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xf6244000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:40000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029296
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-amd64 root=UUID=3f46729c-a47e-4b29-a5a6-6bbe2e6cc7a4 ro vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 2500.009 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ f0000000 size 64 MB
[ 0.004000] Memory: 4122664k/5242880k available (2225k kernel code, 71188k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083880] Calibrating delay using timer specific routine.. 5003.94 BogoMIPS (lpj=10007888)
[ 0.083932] Security Framework initialized
[ 0.083940] SELinux: Disabled at boot.
[ 0.083945] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.084005] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084005] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084636] ACPI: Core revision 20080321
[ 0.125980] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
[ 0.125988] Using local APIC timer interrupts.
[ 0.132008] APIC timer calibration result 12500062
[ 0.132008] Detected 12.500 MHz APIC timer.
[ 0.132008] Booting processor 1/1 ip 6000
[ 0.140008] Initializing CPU#1
[ 0.140008] Calibrating delay using timer specific routine.. 5000.12 BogoMIPS (lpj=10000242)
[ 0.140008] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.140008] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.140008] CPU 1/1 -> Node 0
[ 0.140008] CPU: Physical Processor ID: 0
[ 0.140008] CPU: Processor Core ID: 1
[ 0.219907] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
[ 0.219945] Brought up 2 CPUs
[ 0.219950] Total of 2 processors activated (10004.06 BogoMIPS).
[ 0.220013] CPU0 attaching sched-domain:
[ 0.220013] domain 0: span 0-1
[ 0.220013] groups: 0 1
[ 0.220013] domain 1: span 0-1
[ 0.220013] groups: 0-1
[ 0.220013] CPU1 attaching sched-domain:
[ 0.220013] domain 0: span 0-1
[ 0.220013] groups: 1 0
[ 0.220013] domain 1: span 0-1
[ 0.220013] groups: 0-1
[ 0.220013] net_namespace: 1224 bytes
[ 0.220013] Booting paravirtualized kernel on bare hardware
[ 0.220013] NET: Registered protocol family 16
[ 0.220013] node 0 link 0: io port [1000, 3fff]
[ 0.220013] TOM: 00000000c0000000 aka 3072M
[ 0.220013] node 0 link 0: mmio [a0000, bffff]
[ 0.220013] node 0 link 0: mmio [f4000000, f62fffff]
[ 0.220013] node 0 link 0: mmio [e0000000, efffffff]
[ 0.220013] TOM2: 0000000140000000 aka 5120M
[ 0.220013] bus: [00,07] on node 0 link 0
[ 0.220013] bus: 00 index 0 io port: [0, ffff]
[ 0.220013] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.220013] bus: 00 index 2 mmio: [f0000000, ffffffff]
[ 0.220013] bus: 00 index 3 mmio: [c0000000, efffffff]
[ 0.220013] bus: 00 index 4 mmio: [140000000, fcffffffff]
[ 0.220013] ACPI: bus type pci registered
[ 0.220013] ACPI: MMCONFIG has no entries
[ 0.220013] PCI: Using configuration type 1 for base access
[ 0.220013] ACPI: EC: Look up EC in DSDT
[ 0.220013] ACPI: Interpreter enabled
[ 0.220013] ACPI: (supports S0 S5)
[ 0.220013] ACPI: Using IOAPIC for interrupt routing
[ 0.220013] ACPI: MMCONFIG has no entries
[ 0.220013] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.220679] PCI: Transparent bridge - 0000:00:06.0
[ 0.220877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.220916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBF._PRT]
[ 0.220934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBE._PRT]
[ 0.220953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBD._PRT]
[ 0.220971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBC._PRT]
[ 0.220989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBB._PRT]
[ 0.221008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBA._PRT]
[ 0.221026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCID._PRT]
[ 0.224014] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.224014] pnp: PnP ACPI init
[ 0.224014] ACPI: bus type pnp registered
[ 0.224014] pnp 00:00: parse allocated resources
[ 0.225638] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.225797] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.225826] pnp 00:01: parse allocated resources
[ 0.225845] pnp 00:01: add io 0x60-0x60 flags 0x1
[ 0.225847] pnp 00:01: add io 0x64-0x64 flags 0x1
[ 0.225854] pnp 00:01: add irq 1 flags 0x1
[ 0.226010] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.226030] pnp 00:02: parse allocated resources
[ 0.226048] pnp 00:02: add io 0x60-0x60 flags 0x1
[ 0.226050] pnp 00:02: add io 0x64-0x64 flags 0x1
[ 0.226053] pnp 00:02: add irq 12 flags 0x1
[ 0.226210] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.226228] pnp 00:03: parse allocated resources
[ 0.226247] pnp 00:03: add io 0x3f0-0x3f5 flags 0x1
[ 0.226249] pnp 00:03: add io 0x3f7-0x3f7 flags 0x1
[ 0.226252] pnp 00:03: add irq 6 flags 0x1
[ 0.226254] pnp 00:03: add dma 2 flags 0x0
[ 0.226411] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.226414] pnp: PnP ACPI: found 4 devices
[ 0.226419] ACPI: ACPI bus type pnp unregistered
[ 0.227474] usbcore: registered new interface driver usbfs
[ 0.227776] usbcore: registered new interface driver hub
[ 0.228014] usbcore: registered new device driver usb
[ 0.228014] PCI: Using ACPI for IRQ routing
[ 0.244015] PCI-DMA: Disabling AGP.
[ 0.244015] PCI-DMA: aperture base @ f0000000 size 65536 KB
[ 0.244015] PCI-DMA: using GART IOMMU.
[ 0.244015] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.244015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.244015] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.245964] Switched to high resolution mode on CPU 0
[ 0.248545] Switched to high resolution mode on CPU 1
[ 0.257940] pnp: the driver 'system' has been registered
[ 0.260005] PCI: Bridge: 0000:00:06.0
[ 0.260005] IO window: disabled.
[ 0.260005] MEM window: 0xf6100000-0xf61fffff
[ 0.260005] PREFETCH window: disabled.
[ 0.260005] PCI: Bridge: 0000:00:0a.0
[ 0.260005] IO window: disabled.
[ 0.260005] MEM window: disabled.
[ 0.260005] PREFETCH window: disabled.
[ 0.260005] PCI: Bridge: 0000:00:0b.0
[ 0.260005] IO window: disabled.
[ 0.260005] MEM window: disabled.
[ 0.260005] PREFETCH window: disabled.
[ 0.260005] PCI: Bridge: 0000:00:0c.0
[ 0.260005] IO window: disabled.
[ 0.260005] MEM window: disabled.
[ 0.260005] PREFETCH window: disabled.
[ 0.260005] PCI: Bridge: 0000:00:0d.0
[ 0.260005] IO window: disabled.
[ 0.260005] MEM window: disabled.
[ 0.260005] PREFETCH window: disabled.
[ 0.260005] PCI: Bridge: 0000:00:0e.0
[ 0.260005] IO window: disabled.
[ 0.260005] MEM window: disabled.
[ 0.260005] PREFETCH window: disabled.
[ 0.260005] PCI: Bridge: 0000:00:0f.0
[ 0.260005] IO window: 1000-1fff
[ 0.260005] MEM window: 0xf4000000-0xf60fffff
[ 0.260005] PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[ 0.260005] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.260005] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 0.260005] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.260005] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.260005] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.260005] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.260005] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 0.260005] NET: Registered protocol family 2
[ 0.293154] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.297007] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.301012] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.301012] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.301012] TCP reno registered
[ 0.309109] NET: Registered protocol family 1
[ 0.309215] checking if image is initramfs... it is
[ 0.833007] Freeing initrd memory: 8919k freed
[ 0.837012] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.841008] audit: initializing netlink socket (disabled)
[ 0.841008] type=2000 audit(1246450262.833:1): initialized
[ 0.841008] Total HugeTLB memory allocated, 0
[ 0.841045] VFS: Disk quotas dquot_6.5.1
[ 0.841045] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.841045] msgmni has been set to 8069
[ 0.841045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.841045] io scheduler noop registered
[ 0.841045] io scheduler anticipatory registered
[ 0.841045] io scheduler deadline registered
[ 0.841045] io scheduler cfq registered (default)
[ 0.841045] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.841045] pci 0000:07:00.0: Boot video device
[ 0.841045] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 0.841045] assign_interrupt_mode Found MSI capability
[ 0.841045] Allocate Port Service[0000:00:0a.0:pcie00]
[ 0.841045] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.841045] assign_interrupt_mode Found MSI capability
[ 0.841045] Allocate Port Service[0000:00:0b.0:pcie00]
[ 0.841045] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.841045] assign_interrupt_mode Found MSI capability
[ 0.841045] Allocate Port Service[0000:00:0c.0:pcie00]
[ 0.841045] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.841045] assign_interrupt_mode Found MSI capability
[ 0.841045] Allocate Port Service[0000:00:0d.0:pcie00]
[ 0.841045] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.841045] assign_interrupt_mode Found MSI capability
[ 0.841045] Allocate Port Service[0000:00:0e.0:pcie00]
[ 0.841045] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 0.841045] assign_interrupt_mode Found MSI capability
[ 0.841045] Allocate Port Service[0000:00:0f.0:pcie00]
[ 0.841045] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20001080000, using 3072k, total 262144k
[ 0.841045] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.841045] vesafb: scrolling: redraw
[ 0.841045] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.851328] Console: switching to colour frame buffer device 128x48
[ 0.863267] fb0: VESA VGA frame buffer device
[ 0.867267] Linux agpgart interface v0.103
[ 0.867267] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.867267] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.867267] pnp: the driver 'serial' has been registered
[ 0.867267] brd: module loaded
[ 0.867267] input: Macintosh mouse button emulation as /class/input/input0
[ 0.867267] pnp: the driver 'i8042 kbd' has been registered
[ 0.867267] i8042 kbd 00:01: driver attached
[ 0.867267] pnp: the driver 'i8042 aux' has been registered
[ 0.867267] i8042 aux 00:02: driver attached
[ 0.867267] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.867267] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.867267] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.891268] mice: PS/2 mouse device common for all mice
[ 0.891268] pnp: the driver 'rtc_cmos' has been registered
[ 0.891268] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.891268] rtc0: alarms up to one day
[ 0.908400] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.923269] cpuidle: using governor ladder
[ 0.923269] cpuidle: using governor menu
[ 0.923269] No iBFT detected.
[ 0.923269] TCP cubic registered
[ 0.923269] NET: Registered protocol family 17
[ 0.923269] registered taskstats version 1
[ 0.923269] rtc_cmos rtc_cmos: setting system clock to 2009-07-01 12:11:03 UTC (1246450263)
[ 0.923269] Freeing unused kernel memory: 392k freed
[ 1.020457] device-mapper: uevent: version 1.0.3
[ 1.022791] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel at redhat.com
[ 1.048484] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.051630] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.193359] Uniform Multi-Platform E-IDE driver
[ 1.195997] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.200983] No dock devices found.
[ 1.209017] SCSI subsystem initialized
[ 1.216592] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 1.219592] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.221027] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 1.226436] libata version 3.00 loaded.
[ 1.782453] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:e0:81:54:32:66
[ 1.785997] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 1.793997] ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 23 (level, low) -> IRQ 23
[ 1.797427] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.797430] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.801029] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.804621] ehci_hcd 0000:00:02.1: debug port 1
[ 1.808187] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.808199] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf624a000
[ 1.824769] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.828493] usb usb1: configuration #1 chosen from 1 choice
[ 1.830032] hub 1-0:1.0: USB hub found
[ 1.833860] hub 1-0:1.0: 10 ports detected
[ 1.942125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.946141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.954141] usb usb1: Product: EHCI Host Controller
[ 1.958215] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 1.962244] usb usb1: SerialNumber: 0000:00:02.1
[ 1.966294] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
[ 1.970299] NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0
[ 1.974378] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 1.974541] NFORCE-MCP55: IDE port disabled
[ 1.978550] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.978553] ide0: BM-DMA at 0x2cc0-0x2cc7
[ 1.984961] Probing IDE interface ide0...
[ 2.722262] hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
[ 3.398395] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.398495] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 3.402615] hda: UDMA/33 mode selected
[ 3.410689] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.414908] sata_nv 0000:00:05.0: version 3.5
[ 3.414908] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.418912] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 3.423213] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 3.423265] scsi0 : sata_nv
[ 3.427489] scsi1 : sata_nv
[ 3.431518] ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3070 bmdma 0x2cd0 irq 20
[ 3.435622] ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3080 bmdma 0x2cd8 irq 20
[ 3.931722] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.943720] ata1.00: HPA detected: current 488395055, native 488397168
[ 3.947146] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[ 3.951307] ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.986921] ata1.00: configured for UDMA/133
[ 4.355604] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.391484] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 4.397093] ACPI: PCI Interrupt 0000:00:05.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.401097] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 4.405100] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 4.405250] scsi2 : sata_nv
[ 4.409279] scsi3 : sata_nv
[ 4.409306] ata3: SATA max UDMA/133 cmd 0x3020 ctl 0x3090 bmdma 0x2ce0 irq 21
[ 4.413283] ata4: SATA max UDMA/133 cmd 0x3030 ctl 0x30a0 bmdma 0x2ce8 irq 21
[ 4.793082] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.172991] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.212984] ACPI: PCI Interrupt 0000:00:05.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 5.213712] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 5.217753] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 5.220555] scsi4 : sata_nv
[ 5.225047] scsi5 : sata_nv
[ 5.225047] ata5: SATA max UDMA/133 cmd 0x3040 ctl 0x30b0 bmdma 0x2cf0 irq 22
[ 5.229052] ata6: SATA max UDMA/133 cmd 0x3050 ctl 0x30c0 bmdma 0x2cf8 irq 22
[ 5.604877] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.995696] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.027615] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.027615] ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.028439] udev: renamed network interface eth0 to eth2
[ 6.037027] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 6.037044] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 6.037047] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.039718] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 6.043526] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6245000
[ 6.088993] ssb: Sonics Silicon Backplane found on PCI device 0000:01:08.0
[ 6.092470] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.106023] usb usb2: configuration #1 chosen from 1 choice
[ 6.109643] hub 2-0:1.0: USB hub found
[ 6.113623] hub 2-0:1.0: 10 ports detected
[ 6.150023] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f6106000-f61067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.219059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.222797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.226797] usb usb2: Product: OHCI Host Controller
[ 6.230860] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 6.235268] usb usb2: SerialNumber: 0000:00:02.0
[ 6.249613] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.251326] Uniform CD-ROM driver Revision: 3.20
[ 6.349122] Driver 'sd' needs updating - please use bus_type methods
[ 6.353455] sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
[ 6.355350] sd 0:0:0:0: [sda] Write Protect is off
[ 6.359281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.359306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.363239] sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
[ 6.367104] sd 0:0:0:0: [sda] Write Protect is off
[ 6.370902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.370923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.374811] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 6.429595] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.535934] usb 2-9: new low speed USB device using ohci_hcd and address 2
[ 6.774592] usb 2-9: configuration #1 chosen from 1 choice
[ 6.783452] usb 2-9: New USB device found, idVendor=1241, idProduct=1166
[ 6.787522] usb 2-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.805297] usbcore: registered new interface driver hiddev
[ 6.818292] input: HID 1241:1166 as /class/input/input2
[ 6.845781] input,hidraw0: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:02.0-9
[ 6.850106] usbcore: registered new interface driver usbhid
[ 6.853939] usbhid: v2.6:USB HID core driver
[ 6.919130] PM: Starting manual resume from disk
[ 7.002252] kjournald starting. Commit interval 5 seconds
[ 7.006271] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.477903] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016e65600b7173c]
[ 8.536191] udev: starting version 141
[ 8.542707] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 9.273694] input: Power Button (FF) as /class/input/input3
[ 9.327263] ACPI: Power Button (FF) [PWRF]
[ 9.365918] input: PC Speaker as /class/input/input4
[ 9.687281] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2c40
[ 9.692002] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2c80
[ 10.159747] b43-phy0: Broadcom 4318 WLAN found
[ 10.233475] phy0: Selected rate control algorithm 'pid'
[ 10.241476] ACPI: PCI Interrupt 0000:00:06.1[B] -> GSI 23 (level, low) -> IRQ 23
[ 10.246020] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 10.283438] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 10.291827] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 11.677423] Adding 7815580k swap on /dev/sda1. Priority:-1 extents:1 across:7815580k
[ 12.392475] EXT3 FS on sda2, internal journal
[ 12.725728] loop: module loaded
[ 12.833626] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
[ 12.855000] powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0x9
[ 12.865352] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 12.869671] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 12.873918] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 12.878094] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 12.882240] powernow-k8: ph2 null fid transition 0x11
[ 12.945434] it87: Found IT8716F chip at 0x290, revision 0
[ 12.949446] it87: in3 is VCC (+5V)
[ 12.953424] it87: in7 is VCCH (+5V Stand-By)
[ 14.656024] kjournald starting. Commit interval 5 seconds
[ 14.700658] EXT3 FS on sda3, internal journal
[ 14.704649] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.732146] kjournald starting. Commit interval 5 seconds
[ 14.738243] EXT3 FS on sda5, internal journal
[ 14.742088] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.053423] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.098329] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.295387] eth2: no link during initialization.
[ 16.713875] input: b43-phy0 as /class/input/input5
[ 16.829132] firmware: requesting b43/ucode5.fw
[ 16.917097] firmware: requesting b43/pcm5.fw
[ 16.956739] firmware: requesting b43/b0g0initvals5.fw
[ 16.997853] firmware: requesting b43/b0g0bsinitvals5.fw
[ 17.092117] b43-phy0: Loading firmware version 410.2160 (2015-15-255 15:32:10)
[ 17.642544] NET: Registered protocol family 10
[ 18.146380] Registered led device: b43-phy0::tx
[ 18.152926] Registered led device: b43-phy0::rx
[ 18.156572] Registered led device: b43-phy0::radio
[ 18.235895] lo: Disabled Privacy Extensions
[ 18.240148] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 18.244367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.390047] wlan0: Initial auth_alg=0
[ 19.390051] wlan0: authenticate with AP 00:13:49:b1:2e:1c
[ 19.391422] wlan0: RX authentication from 00:13:49:b1:2e:1c (alg=0 transaction=2 status=0)
[ 19.391422] wlan0: authenticated
[ 19.391422] wlan0: associate with AP 00:13:49:b1:2e:1c
[ 19.391422] wlan0: RX AssocResp from 00:13:49:b1:2e:1c (capab=0x411 status=0 aid=1)
[ 19.391422] wlan0: associated
[ 19.391422] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.446094] wlan0: CTS protection enabled (BSSID=00:13:49:b1:2e:1c)
[ 19.446094] wlan0: switched to short barker preamble (BSSID=00:13:49:b1:2e:1c)
[ 34.998896] wlan0: no IPv6 routers present
[ 35.249519] RPC: Registered udp transport module.
[ 35.250607] RPC: Registered tcp transport module.
[ 35.381043] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 41.517954] Clocksource tsc unstable (delta = -298205271 ns)
[ 46.091705] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 46.109336] NFSD: starting 90-second grace period
[ 54.387273] pnp: the driver 'parport_pc' has been registered
[ 54.388956] lp: driver loaded but no devices found
[ 54.409159] ppdev: user-space parallel port driver
[ 56.902065] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 74.702276] CPU0 attaching NULL sched-domain.
[ 74.702284] CPU1 attaching NULL sched-domain.
[ 74.721068] CPU0 attaching sched-domain:
[ 74.721072] domain 0: span 0-1
[ 74.721074] groups: 0 1
[ 74.721076] domain 1: span 0-1
[ 74.721078] groups: 0-1
[ 74.721080] CPU1 attaching sched-domain:
[ 74.721082] domain 0: span 0-1
[ 74.721083] groups: 1 0
[ 74.721086] domain 1: span 0-1
[ 74.721087] groups: 0-1
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-17) (dannf at debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:47:08 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-amd64 root=UUID=3f46729c-a47e-4b29-a5a6-6bbe2e6cc7a4 ro vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851952) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1245184
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6640, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT CFFF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] ACPI: FACP CFFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] ACPI: DSDT CFFF30C0, 4C8E (r1 GBT NVDAACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS CFFF0000, 0040
[ 0.000000] ACPI: SSDT CFFF7E40, 028A (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: HPET CFFF8100, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98)
[ 0.000000] ACPI: MCFG CFFF8140, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] ACPI: APIC CFFF7D80, 0098 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851952) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3773a000-37fefd6d] RAMDISK
[ 0.000000] early res: 4 [9f800-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-dfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ 0.000000] [ffffe20003800000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000cbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851952
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048463
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1246 pages reserved
[ 0.000000] DMA zone: 2697 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833576 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfefffc00
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000cfff3000
[ 0.000000] PM: Registered nosave memory: 00000000cfff3000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030193
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-amd64 root=UUID=3f46729c-a47e-4b29-a5a6-6bbe2e6cc7a4 ro vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 2512.872 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ 1c46000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 4000000
[ 0.004000] PM: Registered nosave memory: 0000000004000000 - 0000000008000000
[ 0.004000] Memory: 4055004k/4980736k available (2225k kernel code, 138848k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083900] Calibrating delay using timer specific routine.. 5029.71 BogoMIPS (lpj=10059431)
[ 0.083951] Security Framework initialized
[ 0.083958] SELinux: Disabled at boot.
[ 0.083964] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.084005] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084005] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084623] ACPI: Core revision 20080321
[ 0.133120] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
[ 0.133129] Using local APIC timer interrupts.
[ 0.140008] APIC timer calibration result 12564374
[ 0.140008] Detected 12.564 MHz APIC timer.
[ 0.140008] Booting processor 1/1 ip 6000
[ 0.148009] Initializing CPU#1
[ 0.148009] Calibrating delay using timer specific routine.. 5025.82 BogoMIPS (lpj=10051645)
[ 0.148009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.148009] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.148009] CPU 1/1 -> Node 0
[ 0.148009] CPU: Physical Processor ID: 0
[ 0.148009] CPU: Processor Core ID: 1
[ 0.227936] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
[ 0.227974] Brought up 2 CPUs
[ 0.227979] Total of 2 processors activated (10055.53 BogoMIPS).
[ 0.228014] CPU0 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 0 1
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] CPU1 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 1 0
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] net_namespace: 1224 bytes
[ 0.228014] Booting paravirtualized kernel on bare hardware
[ 0.228014] NET: Registered protocol family 16
[ 0.228014] node 0 link 0: io port [1000, fffff]
[ 0.228014] TOM: 00000000d0000000 aka 3328M
[ 0.228014] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.228014] node 0 link 0: mmio [a0000, bffff]
[ 0.228014] node 0 link 0: mmio [d0000000, ffb7ffff]
[ 0.228014] TOM2: 0000000130000000 aka 4864M
[ 0.228014] bus: [00,ff] on node 0 link 0
[ 0.228014] bus: 00 index 0 io port: [0, ffff]
[ 0.228014] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.228014] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.228014] bus: 00 index 3 mmio: [130000000, fcffffffff]
[ 0.228014] ACPI: bus type pci registered
[ 0.228014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.228014] PCI: MCFG area at f0000000 reserved in E820
[ 0.235014] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.235021] PCI: Using configuration type 1 for base access
[ 0.236014] ACPI: EC: Look up EC in DSDT
[ 0.246218] ACPI: Interpreter enabled
[ 0.246226] ACPI: (supports S0 S1 S4 S5)
[ 0.246244] ACPI: Using IOAPIC for interrupt routing
[ 0.254983] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.254983] PCI: Transparent bridge - 0000:00:06.0
[ 0.254983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.254983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.302877] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 *15)
[ 0.302986] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.302986] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[ 0.302986] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.302986] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.302986] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 0.302986] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.302986] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.302986] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.302986] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.302986] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.302986] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.302986] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.303146] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.305425] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 *15)
[ 0.305578] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.305735] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.305889] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 *15)
[ 0.306044] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
[ 0.306242] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.306434] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.306626] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.306817] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.307008] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.307199] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.307390] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.307582] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.307774] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.307966] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.308157] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.308350] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.308542] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.308736] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.308928] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.309110] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.309419] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.309612] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.309804] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.310205] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.310354] pnp: PnP ACPI init
[ 0.310365] ACPI: bus type pnp registered
[ 0.310443] pnp 00:00: parse allocated resources
[ 0.310527] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.310699] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.310712] pnp 00:01: parse allocated resources
[ 0.310807] pnp 00:01: add io 0x1000-0x107f flags 0x1
[ 0.310809] pnp 00:01: add io 0x1080-0x10ff flags 0x1
[ 0.310811] pnp 00:01: add io 0x1400-0x147f flags 0x1
[ 0.310813] pnp 00:01: add io 0x1480-0x14ff flags 0x1
[ 0.310815] pnp 00:01: add io 0x1800-0x187f flags 0x1
[ 0.310816] pnp 00:01: add io 0x1880-0x18ff flags 0x1
[ 0.310819] pnp 00:01: add mem 0xd0000000-0xdfffffff flags 0x1
[ 0.310821] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.310997] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312633] pnp 00:02: parse allocated resources
[ 0.312639] pnp 00:02: add io 0x10-0x1f flags 0x1
[ 0.312641] pnp 00:02: add io 0x22-0x3f flags 0x1
[ 0.312643] pnp 00:02: add io 0x44-0x5f flags 0x1
[ 0.312645] pnp 00:02: add io 0x62-0x63 flags 0x1
[ 0.312647] pnp 00:02: add io 0x65-0x6f flags 0x1
[ 0.312649] pnp 00:02: add io 0x74-0x7f flags 0x1
[ 0.312650] pnp 00:02: add io 0x91-0x93 flags 0x1
[ 0.312652] pnp 00:02: add io 0xa2-0xbf flags 0x1
[ 0.312654] pnp 00:02: add io 0xe0-0xef flags 0x1
[ 0.312656] pnp 00:02: add io 0x4d0-0x4d1 flags 0x1
[ 0.312658] pnp 00:02: add io 0x800-0x87f flags 0x1
[ 0.312659] pnp 00:02: add io 0x295-0x314 flags 0x1
[ 0.312661] pnp 00:02: add io 0x290-0x294 flags 0x1
[ 0.312664] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.312844] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312857] pnp 00:03: parse allocated resources
[ 0.312862] pnp 00:03: add dma 4 flags 0x4
[ 0.312864] pnp 00:03: add io 0x0-0xf flags 0x1
[ 0.312866] pnp 00:03: add io 0x80-0x90 flags 0x1
[ 0.312868] pnp 00:03: add io 0x94-0x9f flags 0x1
[ 0.312869] pnp 00:03: add io 0xc0-0xdf flags 0x1
[ 0.313031] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.313092] pnp 00:04: parse allocated resources
[ 0.313149] pnp 00:04: add irq 8 flags 0x1
[ 0.313151] pnp 00:04: add mem 0xfefffc00-0xfeffffff flags 0x1
[ 0.313223] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.313223] pnp 00:05: parse allocated resources
[ 0.313223] pnp 00:05: add io 0x70-0x73 flags 0x1
[ 0.313223] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.313223] pnp 00:06: parse allocated resources
[ 0.313223] pnp 00:06: add io 0x61-0x61 flags 0x1
[ 0.313223] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.313223] pnp 00:07: parse allocated resources
[ 0.313223] pnp 00:07: add io 0xf0-0xff flags 0x1
[ 0.313223] pnp 00:07: add irq 13 flags 0x1
[ 0.313223] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.313223] pnp 00:08: parse allocated resources
[ 0.313223] pnp 00:08: add io 0x3f8-0x3ff flags 0x1
[ 0.313223] pnp 00:08: add irq 4 flags 0x1
[ 0.313223] pnp 00:08: parse resource options
[ 0.313223] pnp 00:08: new independent option
[ 0.313223] pnp 00:08: new dependent option (priority 0x1)
[ 0.313223] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.313223] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.313223] pnp 00:08: new dependent option (priority 0x1)
[ 0.313223] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.313223] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.313223] pnp 00:08: new dependent option (priority 0x1)
[ 0.313223] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.313223] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.313223] pnp 00:08: new dependent option (priority 0x1)
[ 0.313223] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.313223] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.313223] pnp 00:08: end dependent options
[ 0.317224] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.317224] pnp 00:09: parse allocated resources
[ 0.317224] pnp 00:09: add io 0x378-0x37f flags 0x1
[ 0.317224] pnp 00:09: add irq 7 flags 0x1
[ 0.317224] pnp 00:09: parse resource options
[ 0.317224] pnp 00:09: new independent option
[ 0.317224] pnp 00:09: new dependent option (priority 0x1)
[ 0.317224] pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1
[ 0.317224] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.317224] pnp 00:09: new dependent option (priority 0x1)
[ 0.317224] pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1
[ 0.317224] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.317224] pnp 00:09: new dependent option (priority 0x1)
[ 0.317224] pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[ 0.317224] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.317224] pnp 00:09: end dependent options
[ 0.317224] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.317224] pnp 00:0a: parse allocated resources
[ 0.317224] pnp 00:0a: add io 0x60-0x60 flags 0x1
[ 0.317224] pnp 00:0a: add io 0x64-0x64 flags 0x1
[ 0.317224] pnp 00:0a: add irq 1 flags 0x1
[ 0.317224] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.317224] pnp 00:0b: parse allocated resources
[ 0.317224] pnp 00:0b: add mem 0xf0000000-0xf7ffffff flags 0x1
[ 0.317224] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.317224] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.317224] pnp 00:0c: parse allocated resources
[ 0.317224] pnp 00:0c: add mem 0xd0000-0xd3fff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xf0000-0xf7fff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xf8000-0xfbfff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xfc000-0xfffff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xcfff0000-0xcfffffff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xffff0000-0xffffffff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0x100000-0xcffeffff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.317224] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x1
[ 0.317224] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.317224] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.317224] pnp: PnP ACPI: found 13 devices
[ 0.317224] ACPI: ACPI bus type pnp unregistered
[ 0.317224] usbcore: registered new interface driver usbfs
[ 0.317224] usbcore: registered new interface driver hub
[ 0.317224] usbcore: registered new device driver usb
[ 0.317224] PCI: Using ACPI for IRQ routing
[ 0.337374] PCI-DMA: Disabling AGP.
[ 0.337374] PCI-DMA: aperture base @ 4000000 size 65536 KB
[ 0.337374] PCI-DMA: using GART IOMMU.
[ 0.337374] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.337374] hpet0: at MMIO 0xfefffc00, IRQs 2, 8, 31
[ 0.337374] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.337374] ACPI: RTC can wake from S4
[ 0.339147] Switched to high resolution mode on CPU 0
[ 0.341882] Switched to high resolution mode on CPU 1
[ 0.347125] pnp: the driver 'system' has been registered
[ 0.347143] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.347150] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.347156] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.347162] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.347168] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.347174] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.347181] system 00:01: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 0.347189] system 00:01: driver attached
[ 0.347196] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.347202] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.347210] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.347216] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.347222] system 00:02: driver attached
[ 0.347233] system 00:0b: iomem range 0xf0000000-0xf7ffffff could not be reserved
[ 0.347241] system 00:0b: driver attached
[ 0.347248] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 0.347254] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.347260] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.347266] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.347272] system 00:0c: iomem range 0xcfff0000-0xcfffffff could not be reserved
[ 0.347280] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.347288] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.347294] system 00:0c: iomem range 0x100000-0xcffeffff could not be reserved
[ 0.347302] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.347310] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.347318] system 00:0c: driver attached
[ 0.349859] PCI: Bridge: 0000:00:06.0
[ 0.349859] IO window: disabled.
[ 0.349859] MEM window: 0xfb000000-0xfb0fffff
[ 0.349859] PREFETCH window: disabled.
[ 0.349859] PCI: Bridge: 0000:00:0f.0
[ 0.349859] IO window: 9000-9fff
[ 0.349859] MEM window: 0xf8000000-0xfaffffff
[ 0.349859] PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[ 0.349859] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.349859] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 0.349859] NET: Registered protocol family 2
[ 0.385763] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.389607] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.393611] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.393611] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.393611] TCP reno registered
[ 0.401735] NET: Registered protocol family 1
[ 0.401832] checking if image is initramfs... it is
[ 0.922087] Freeing initrd memory: 8919k freed
[ 0.929610] audit: initializing netlink socket (disabled)
[ 0.929610] type=2000 audit(1246451137.916:1): initialized
[ 0.929610] Total HugeTLB memory allocated, 0
[ 0.929610] VFS: Disk quotas dquot_6.5.1
[ 0.929610] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.929610] msgmni has been set to 7937
[ 0.929610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.929610] io scheduler noop registered
[ 0.929610] io scheduler anticipatory registered
[ 0.929610] io scheduler deadline registered
[ 0.929610] io scheduler cfq registered (default)
[ 0.954088] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 0.954105] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 0.954122] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 0.954137] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 0.954154] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 0.954172] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.954188] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.954214] pci 0000:02:00.0: Boot video device
[ 0.954321] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 0.954338] assign_interrupt_mode Found MSI capability
[ 0.954359] Allocate Port Service[0000:00:0f.0:pcie00]
[ 0.954409] Allocate Port Service[0000:00:0f.0:pcie03]
[ 0.954857] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20009100000, using 3072k, total 262144k
[ 0.954867] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.954873] vesafb: scrolling: redraw
[ 0.954878] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.966967] Console: switching to colour frame buffer device 128x48
[ 0.974967] fb0: VESA VGA frame buffer device
[ 0.978969] hpet_resources: 0xfefffc00 is busy
[ 0.978969] Linux agpgart interface v0.103
[ 0.978969] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.978969] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.978969] pnp: the driver 'serial' has been registered
[ 0.978969] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.978969] serial 00:08: driver attached
[ 0.978969] brd: module loaded
[ 0.978969] input: Macintosh mouse button emulation as /class/input/input0
[ 0.978969] pnp: the driver 'i8042 kbd' has been registered
[ 0.978969] i8042 kbd 00:0a: driver attached
[ 0.978969] pnp: the driver 'i8042 aux' has been registered
[ 0.978969] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.978969] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.982972] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.006968] mice: PS/2 mouse device common for all mice
[ 1.006968] pnp: the driver 'rtc_cmos' has been registered
[ 1.006968] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.006968] rtc0: alarms up to one year, y3k
[ 1.006968] rtc_cmos 00:05: driver attached
[ 1.006968] cpuidle: using governor ladder
[ 1.006968] cpuidle: using governor menu
[ 1.006968] No iBFT detected.
[ 1.006968] TCP cubic registered
[ 1.006968] NET: Registered protocol family 17
[ 1.006968] registered taskstats version 1
[ 1.006968] rtc_cmos 00:05: setting system clock to 2009-07-01 12:25:38 UTC (1246451138)
[ 1.006968] Freeing unused kernel memory: 392k freed
[ 1.026971] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.098975] device-mapper: uevent: version 1.0.3
[ 1.098975] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel at redhat.com
[ 1.126974] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.126974] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.286975] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 1.289587] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
[ 1.293275] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.293278] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.295965] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.297838] ehci_hcd 0000:00:02.1: debug port 1
[ 1.301801] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.301813] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfb106000
[ 1.304736] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.310977] Uniform Multi-Platform E-IDE driver
[ 1.313466] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.316701] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.319832] usb usb1: configuration #1 chosen from 1 choice
[ 1.320180] No dock devices found.
[ 1.327139] hub 1-0:1.0: USB hub found
[ 1.330516] hub 1-0:1.0: 10 ports detected
[ 1.334006] SCSI subsystem initialized
[ 1.348491] libata version 3.00 loaded.
[ 1.436622] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.440211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443871] usb usb1: Product: EHCI Host Controller
[ 1.447870] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 1.451644] usb usb1: SerialNumber: 0000:00:02.1
[ 1.456621] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 1.460390] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
[ 1.464230] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.464233] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.470706] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.470733] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfb105000
[ 1.530958] usb usb2: configuration #1 chosen from 1 choice
[ 1.534767] hub 2-0:1.0: USB hub found
[ 1.538751] hub 2-0:1.0: 10 ports detected
[ 1.645635] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.648886] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656517] usb usb2: Product: OHCI Host Controller
[ 1.682937] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 1.686938] usb usb2: SerialNumber: 0000:00:02.0
[ 1.694937] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
[ 1.698622] NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0
[ 1.702420] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 1.706227] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.710102] NFORCE-MCP55: IDE port disabled
[ 1.713959] ide0: BM-DMA at 0xf000-0xf007
[ 1.717829] Probing IDE interface ide0...
[ 2.004629] usb 2-9: new low speed USB device using ohci_hcd and address 2
[ 2.234279] usb 2-9: configuration #1 chosen from 1 choice
[ 2.238976] usb 2-9: New USB device found, idVendor=1241, idProduct=1166
[ 2.245806] usb 2-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.478753] hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
[ 3.202712] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.202850] hda: UDMA/66 mode selected
[ 3.210671] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.214672] sata_nv 0000:00:05.0: version 3.5
[ 3.214672] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 3.218287] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
[ 3.218965] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 3.222710] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 3.226277] scsi0 : sata_nv
[ 3.229970] scsi1 : sata_nv
[ 3.233476] ata1: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb800 irq 21
[ 3.237476] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xb808 irq 21
[ 3.774682] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.785877] ata1.00: HPA detected: current 488395055, native 488397168
[ 3.786162] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[ 3.789996] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.826473] ata1.00: configured for UDMA/133
[ 4.167658] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.173349] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 4.179208] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 4.182749] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 4.186375] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 4.189989] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 4.190411] scsi2 : sata_nv
[ 4.193980] scsi3 : sata_nv
[ 4.194264] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xcc00 irq 20
[ 4.197809] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc800 bmdma 0xcc08 irq 20
[ 4.556843] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.904526] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.912521] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[ 4.915917] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23
[ 4.919369] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 4.922840] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 4.923270] scsi4 : sata_nv
[ 4.925333] scsi5 : sata_nv
[ 4.928637] ata5: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 23
[ 4.932090] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 23
[ 5.267723] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.602694] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.612204] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 5.615663] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 5.619024] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
[ 5.619662] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 6.160096] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:45:d2:18
[ 6.163166] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 6.174596] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 6.175085] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[ 6.186890] udev: renamed network interface eth0 to eth2
[ 6.194889] usbcore: registered new interface driver hiddev
[ 6.206886] input: HID 1241:1166 as /class/input/input2
[ 6.229215] input,hidraw0: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:02.0-9
[ 6.230886] usbcore: registered new interface driver usbhid
[ 6.234415] usbhid: v2.6:USB HID core driver
[ 6.242954] ssb: Sonics Silicon Backplane found on PCI device 0000:01:08.0
[ 6.247190] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 6.250887] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 6.306884] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fb006000-fb0067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.325497] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.329505] Uniform CD-ROM driver Revision: 3.20
[ 6.338909] Driver 'sd' needs updating - please use bus_type methods
[ 6.343022] sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
[ 6.343060] sd 0:0:0:0: [sda] Write Protect is off
[ 6.347065] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.347108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.350970] sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
[ 6.354909] sd 0:0:0:0: [sda] Write Protect is off
[ 6.358871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.358901] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.362832] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 6.410386] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.787453] PM: Starting manual resume from disk
[ 6.866449] kjournald starting. Commit interval 5 seconds
[ 6.867905] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.623122] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016e65600b7173c]
[ 8.536578] udev: starting version 141
[ 8.540732] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 9.331186] input: Power Button (FF) as /class/input/input3
[ 9.377911] input: PC Speaker as /class/input/input4
[ 9.382351] ACPI: Power Button (FF) [PWRF]
[ 9.388047] input: Power Button (CM) as /class/input/input5
[ 9.429554] ACPI: Power Button (CM) [PWRB]
[ 9.794479] pnp: the driver 'parport_pc' has been registered
[ 9.794479] parport_pc 00:09: reported by Plug and Play ACPI
[ 9.809907] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.912619] parport_pc 00:09: driver attached
[ 10.001375] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 10.004465] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[ 10.219914] b43-phy0: Broadcom 4318 WLAN found
[ 10.296220] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 10.300367] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 10.304572] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 10.308555] phy0: Selected rate control algorithm 'pid'
[ 10.360936] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 11.744833] Adding 7815580k swap on /dev/sda1. Priority:-1 extents:1 across:7815580k
[ 12.425397] EXT3 FS on sda2, internal journal
[ 12.964700] loop: module loaded
[ 13.066632] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
[ 13.096557] powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0x9
[ 13.099925] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 13.103926] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 13.107901] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 13.111846] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 13.115705] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 13.171029] it87: Found IT8716F chip at 0x290, revision 0
[ 13.174733] it87: in3 is VCC (+5V)
[ 13.178338] it87: in7 is VCCH (+5V Stand-By)
[ 123.043285] kjournald starting. Commit interval 5 seconds
[ 123.044774] EXT3 FS on sda3, internal journal
[ 123.044774] EXT3-fs: mounted filesystem with ordered data mode.
[ 123.080056] kjournald starting. Commit interval 5 seconds
[ 123.080056] EXT3 FS on sda5, internal journal
[ 123.080056] EXT3-fs: mounted filesystem with ordered data mode.
[ 124.382923] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 124.432831] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 124.535669] eth2: no link during initialization.
[ 125.286936] input: b43-phy0 as /class/input/input6
[ 125.399616] firmware: requesting b43/ucode5.fw
[ 125.509424] firmware: requesting b43/pcm5.fw
[ 125.547154] firmware: requesting b43/b0g0initvals5.fw
[ 125.603501] firmware: requesting b43/b0g0bsinitvals5.fw
[ 125.707016] b43-phy0: Loading firmware version 410.2160 (2015-15-255 15:32:10)
[ 126.278542] NET: Registered protocol family 10
[ 126.735315] Registered led device: b43-phy0::tx
[ 126.742165] Registered led device: b43-phy0::rx
[ 126.745787] Registered led device: b43-phy0::radio
[ 126.826162] lo: Disabled Privacy Extensions
[ 126.830363] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 126.834564] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 127.737317] wlan0: Initial auth_alg=0
[ 127.737321] wlan0: authenticate with AP 00:13:49:b1:2e:1c
[ 127.737286] wlan0: RX authentication from 00:13:49:b1:2e:1c (alg=0 transaction=2 status=0)
[ 127.737286] wlan0: authenticated
[ 127.737286] wlan0: associate with AP 00:13:49:b1:2e:1c
[ 127.737286] wlan0: RX AssocResp from 00:13:49:b1:2e:1c (capab=0x411 status=0 aid=1)
[ 127.737286] wlan0: associated
[ 127.737286] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 127.971869] wlan0: CTS protection enabled (BSSID=00:13:49:b1:2e:1c)
[ 127.971869] wlan0: switched to short barker preamble (BSSID=00:13:49:b1:2e:1c)
[ 143.593856] wlan0: no IPv6 routers present
[ 159.293959] RPC: Registered udp transport module.
[ 159.296563] RPC: Registered tcp transport module.
[ 159.423412] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 165.671496] Clocksource tsc unstable (delta = -300035282 ns)
[ 170.255429] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 170.277218] NFSD: starting 90-second grace period
[ 179.494713] lp0: using parport0 (interrupt-driven).
[ 179.516281] ppdev: user-space parallel port driver
[ 206.405264] CPU0 attaching NULL sched-domain.
[ 206.405272] CPU1 attaching NULL sched-domain.
[ 206.424691] CPU0 attaching sched-domain:
[ 206.424697] domain 0: span 0-1
[ 206.424700] groups: 0 1
[ 206.424707] domain 1: span 0-1
[ 206.424711] groups: 0-1
[ 206.424716] CPU1 attaching sched-domain:
[ 206.424719] domain 0: span 0-1
[ 206.424723] groups: 1 0
[ 206.424730] domain 1: span 0-1
[ 206.424734] groups: 0-1
More information about the coreboot
mailing list