[coreboot] build service results for r4386
info at coresystems.de
Wed Jul 1 13:18:41 CEST 2009
Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "rminnich" checked in revision 4386 to
the coreboot repository. This caused the following
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.
Patch should work against r4381 (or later ?)
This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)
The coreboot_table issue seems to have been automagically resolved by
the latest core files.
It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.
Signed-off-by: Jon Harrison <bothlyn at blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4386&device=sandpointx3_altimus_mpc7410&vendor=motorola&num=2
Compilation of via:epia-m700 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4386&device=epia-m700&vendor=via&num=2
Configuration of via:epia-n is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4386&device=epia-n&vendor=via&num=1
If something broke during this checkin please be a pain
in rminnich's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
coreboot automatic build system
More information about the coreboot