[coreboot] 4 GB RAM failure on DBM690T target (690G/SB600)
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Fri Jan 16 18:36:00 CET 2009
Hi,
I'm using a slightly modified DBM690T target to boot my Asus M2A-VM
(690G/SB600) board.
Booting with 4 GB RAM (2x2) into Linux fails with lots of ACPI errors
because the ACPI code for DBM690T hardcodes 1 GB of RAM and has the code
paths for >4 GB commented out.
My attempts to fix this have been unsuccessful.
Was the DBM690T ever tested with 4 GB RAM and did it boot into Linux?
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
More information about the coreboot
mailing list